nuttx/arch/arm/include/arch.h
Ville Juven f4b82b6405 sched/addrenv: Remove up_addrenv_restore
The function is not relevant any longer, remove it. Also remove
save_addrenv_t, the parameter taken by up_addrenv_restore.

Implement addrenv_select() / addrenv_restore() to handle the temporary
instantiation of address environments, e.g. when a process is being
created.
2023-02-08 02:51:23 +08:00

179 lines
5.5 KiB
C

/****************************************************************************
* arch/arm/include/arch.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This file should never be included directly but, rather,
* only indirectly through nuttx/arch.h
*/
#ifndef __ARCH_ARM_INCLUDE_ARCH_H
#define __ARCH_ARM_INCLUDE_ARCH_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <nuttx/pgalloc.h>
#endif
/****************************************************************************
* Pre-processor Prototypes
****************************************************************************/
#ifdef CONFIG_PIC
/* This identifies the register the is used by the processor as the PIC base
* register. It is usually r9 or r10
*/
#define PIC_REG r10
#define PIC_REG_STRING "r10"
/* Macros to get and set the PIC base register. picbase is assumed to be
* of type (void*) and that it will fit into a uint32_t. These must be
* inline so that they will be compatible with the ABIs rules for
* preserving the PIC register
*/
#define up_getpicbase(ppicbase) \
do { \
uint32_t picbase; \
__asm__ \
( \
"\tmov %0, " PIC_REG_STRING "\n\t" \
: "=r"(picbase) \
); \
*ppicbase = (void *)picbase; \
} while (0)
#define up_setpicbase(picbase) \
do { \
uint32_t _picbase = (uint32_t)picbase; \
__asm__ \
( \
"\tmov " PIC_REG_STRING ", %0\n\t" \
: : "r"(_picbase) : PIC_REG_STRING \
); \
} while (0)
#endif /* CONFIG_PIC */
#ifdef CONFIG_ARCH_ADDRENV
#if CONFIG_MM_PGSIZE != 4096
# error Only pages sizes of 4096 are currently supported (CONFIG_ARCH_ADDRENV)
#endif
/* Convert 4KiB pages to 1MiB sections */
# define __PG2SECT_SHIFT (20 - MM_PGSHIFT)
# define __PG2SECT_MASK ((1 << __PG2SECT_SHIFT) - 1)
# define ARCH_PG2SECT(p) (((p) + __PG2SECT_MASK) >> __PG2SECT_SHIFT)
# define ARCH_SECT2PG(s) ((s) << __PG2SECT_SHIFT)
# define ARCH_TEXT_NSECTS ARCH_PG2SECT(CONFIG_ARCH_TEXT_NPAGES)
# define ARCH_DATA_NSECTS ARCH_PG2SECT(CONFIG_ARCH_DATA_NPAGES)
# define ARCH_HEAP_NSECTS ARCH_PG2SECT(CONFIG_ARCH_HEAP_NPAGES)
# ifdef CONFIG_ARCH_VMA_MAPPING
# define ARCH_SHM_NSECTS ARCH_PG2SECT(ARCH_SHM_MAXPAGES)
# endif
# ifdef CONFIG_ARCH_STACK_DYNAMIC
# define ARCH_STACK_NSECTS ARCH_PG2SECT(CONFIG_ARCH_STACK_NPAGES)
# endif
#endif /* CONFIG_ARCH_ADDRENV */
/* Redefine the linker symbols as armlink style */
#ifdef CONFIG_ARM_TOOLCHAIN_ARMCLANG
# define _sinit Image$$init_section$$Base
# define _einit Image$$init_section$$Limit
#endif
/****************************************************************************
* Inline functions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
#ifdef CONFIG_ARCH_ADDRENV
/* The task group resources are retained in a single structure, task_group_s
* that is defined in the header file nuttx/include/nuttx/sched.h. The type
* arch_addrenv_t must be defined by platform specific logic in
* nuttx/arch/<architecture>/include/arch.h.
*
* These tables would hold the physical address of the level 2 page tables.
* All would be initially NULL and would not be backed up with physical
* memory until mappings in the level 2 page table are required.
*/
struct arch_addrenv_s
{
/* Level 1 page table entries for each group section */
uintptr_t *text[ARCH_TEXT_NSECTS];
uintptr_t *data[ARCH_DATA_NSECTS];
#ifdef CONFIG_BUILD_KERNEL
uintptr_t *heap[ARCH_HEAP_NSECTS];
#ifdef CONFIG_ARCH_VMA_MAPPING
uintptr_t *shm[ARCH_SHM_NSECTS];
#endif
/* Initial heap allocation (in bytes). This exists only provide an
* indirect path for passing the size of the initial heap to the heap
* initialization logic. These operations are separated in time and
* architecture. REVISIT: I would like a better way to do this.
*/
size_t heapsize;
#endif
};
typedef struct arch_addrenv_s arch_addrenv_t;
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ARCH_ARM_INCLUDE_ARCH_H */