Gregory Nutt 77f980e676 Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.		2017-04-09 14:44:49 -06:00
..
.gitignore
Makefile	Remove all implementatinos of up_wdginitialize(). It is no longer used.	2016-05-18 19:48:42 -06:00
stm32_adc.c	Remove all references to board_adc_setup()	2016-12-05 17:06:08 -06:00
stm32_appinit.c	Olimex STM32 P407: Add support for on-board microSD slot. Does not work... Currently all commands to the SD card timeout.	2017-01-28 10:17:10 -06:00
stm32_autoleds.c	Centralize definitions associated with CONFIG_DEBUG_LEDS	2016-06-15 14:12:19 -06:00
stm32_boot.c	NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.	2016-12-01 13:30:24 -06:00
stm32_buttons.c	Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.	2017-04-09 14:44:49 -06:00
stm32_can.c	Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.	2016-12-06 08:51:37 -06:00
stm32_deselectlcd.c
stm32_deselectsram.c
stm32_extmem.c
stm32_lcd.c	Centralize definitions associated with CONFIG_DEBUG_LCD	2016-06-15 11:40:33 -06:00
stm32_ostest.c	Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()	2016-02-13 12:37:46 -06:00
stm32_pwm.c	Finish removing traces of BOARDIOC_PWMSETUP	2016-12-05 14:56:21 -06:00
stm32_selectlcd.c
stm32_selectsram.c
stm32_spi.c	Centralize definitions associated with CONFIG_DEBUG_SPI	2016-06-15 10:41:13 -06:00
stm32_stmpe811.c	Add argument to STM32 EXTI interrupt handlers.	2017-02-27 14:21:30 -06:00
stm32_usb.c	stm32_gpiosetevent: GPIO IRQ function should not return the xcpt_t oldhandler. This value is useful and potentially dangerous by itself after the change to assocaite a argument with the interrupt handler.	2017-03-02 18:20:38 -06:00
stm32_userleds.c	Centralize definitions associated with CONFIG_DEBUG_LEDS	2016-06-15 14:12:19 -06:00
stm3240g-eval.h	Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.	2016-12-06 08:51:37 -06:00