nuttx

History

Gregory Nutt 0aa7209765 Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems		2014-08-07 13:42:47 -06:00
..
include	More trailing whilespace removal	2014-04-13 16:22:22 -06:00
nsh	Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems	2014-08-07 13:42:47 -06:00
scripts	Massive clean-up of linker scripts from Freddie Chopin	2012-11-04 17:18:25 +00:00
src	More trailing whilespace removal	2014-04-13 16:22:22 -06:00
Kconfig	Add interrupt vector logic for the LM4F120	2013-03-01 21:41:29 +00:00
README.txt

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.