sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5efe1d5c54
nuttx/boards/arm/stm32l4/stm32l4r9ai-disco/src/stm32l4r9ai-disco.h
Alin Jerpelea 0686bba9b0 boards: stm3214: update licenses to Apache 
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 07:11:32 -07:00

265 lines
8.0 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32l4/stm32l4r9ai-disco/src/stm32l4r9ai-disco.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32L4_STM32L4R9AI_DISCO_SRC_STM32L4R9AI_DISCO_H
#define __BOARDS_ARM_STM32L4_STM32L4R9AI_DISCO_SRC_STM32L4R9AI_DISCO_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include "stm32l4_gpio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#define HAVE_PROC 1
#define HAVE_RTC_DRIVER 1
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
#define HAVE_USBMONITOR 1
#if !defined(CONFIG_FS_PROCFS)
# undef HAVE_PROC
#endif
#if defined(HAVE_PROC) && defined(CONFIG_DISABLE_MOUNTPOINT)
# warning Mountpoints disabled. No procfs support
# undef HAVE_PROC
#endif
/* Check if we can support the RTC driver */
#if !defined(CONFIG_RTC) || !defined(CONFIG_RTC_DRIVER)
# undef HAVE_RTC_DRIVER
#endif
/* This is the on-chip progmem memory driver minor number */
#define PROGMEM_MTD_MINOR 1
/* Can't support USB host or device features if USB OTG FS is not enabled */
#ifndef CONFIG_STM32L4_OTGFS
# undef HAVE_USBDEV
# undef HAVE_USBHOST
#endif
/* Can't support USB device if USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
#endif
/* Can't support USB host is USB host is not enabled */
#ifndef CONFIG_USBHOST
# undef HAVE_USBHOST
#endif
/* Check if we should enable the USB monitor before starting NSH */
#ifndef CONFIG_USBMONITOR
# undef HAVE_USBMONITOR
#endif
#ifndef HAVE_USBDEV
# undef CONFIG_USBDEV_TRACE
#endif
#ifndef HAVE_USBHOST
# undef CONFIG_USBHOST_TRACE
#endif
#if !defined(CONFIG_USBDEV_TRACE) && !defined(CONFIG_USBHOST_TRACE)
# undef HAVE_USBMONITOR
#endif
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing
* PB13 OTG_FS_PowerSwitchOn
* PB14 OTG_FS_Overcurrent
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
#define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN13)
#ifdef CONFIG_USBHOST
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|\
GPIO_SPEED_100MHz|GPIO_PUSHPULL|\
GPIO_PORTB|GPIO_PIN14)
#else
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN14)
#endif
/* LED.
* LD1: the orange LED on PB0
* LD2: the green LED on PH4
*
* - When the I/O is HIGH value, the LED is on.
* - When the I/O is LOW, the LED is off.
*/
#define GPIO_LED_RED \
(GPIO_PORTB | GPIO_PIN0 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PUSHPULL | \
GPIO_PULLUP | GPIO_SPEED_50MHz)
#define GPIO_LED_GRN \
(GPIO_PORTH | GPIO_PIN4 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PUSHPULL | \
GPIO_PULLUP | GPIO_SPEED_50MHz)
/* Buttons
*
* There is a 4 way d-pad 'joystick' with center button
* connected to PC13 and others to PB4,3,2,1
* C L D R U
*/
#define MIN_IRQBUTTON BUTTON_CENTER
#define MAX_IRQBUTTON BUTTON_UP
#define NUM_IRQBUTTONS 5
#define GPIO_BTN_CENTER \
(GPIO_INPUT |GPIO_PULLDOWN |GPIO_EXTI | GPIO_PORTC | GPIO_PIN13)
#define GPIO_BTN_LEFT \
(GPIO_INPUT |GPIO_PULLDOWN |GPIO_EXTI | GPIO_PORTB | GPIO_PIN4)
#define GPIO_BTN_DOWN \
(GPIO_INPUT |GPIO_PULLDOWN |GPIO_EXTI | GPIO_PORTB | GPIO_PIN2)
#define GPIO_BTN_RIGHT \
(GPIO_INPUT |GPIO_PULLDOWN |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
#define GPIO_BTN_UP \
(GPIO_INPUT |GPIO_PULLDOWN |GPIO_EXTI | GPIO_PORTB | GPIO_PIN1)
/* SPI1 off */
/* XXX is this used on disco? */
#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
GPIO_PORTE | GPIO_PIN15)
#define GPIO_SPI1_MISO_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
GPIO_PORTE | GPIO_PIN14)
#define GPIO_SPI1_SCK_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
GPIO_PORTE | GPIO_PIN13)
#define GPIO_SPI1_NSS_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
GPIO_PORTE | GPIO_PIN12)
/* Devices on the onboard I2C bus. */
#define DISCO_I2C_OBDEV_DSI 0x70
#define DISCO_I2C_OBDEV_CS43L22 0x94
#define DISCO_I2C_OBDEV_CAMERA 0x60
#define DISCO_I2C_OBDEV_MFX_V3 0x84
/****************************************************************************
* Public Data
****************************************************************************/
/* Global driver instances */
#ifdef CONFIG_STM32L4_SPI1
extern struct spi_dev_s *g_spi1;
#endif
#ifdef CONFIG_STM32L4_SPI2
extern struct spi_dev_s *g_spi2;
#endif
/****************************************************************************
* Public Functions Definitions
****************************************************************************/
/****************************************************************************
* Name: stm32l4_adc_setup
*
* Description:
* Initialize ADC and register the ADC driver.
*
****************************************************************************/
int stm32l4_adc_setup(void);
/****************************************************************************
* Name: stm32l4_adc_measure_voltages
*
* Description:
* Read internal reference voltage, internal VBAT and one external voltage.
*
****************************************************************************/
int stm32l4_adc_measure_voltages(uint32_t *vrefint,
uint32_t *vbat,
uint32_t *vext);
/****************************************************************************
* Name: stm32l4_dac_setup
*
* Description:
* Initialize DAC and register the DAC driver.
*
****************************************************************************/
int stm32l4_dac_setup(void);
/****************************************************************************
* Name: stm32_dfsdm_setup
*
* Description:
* Initialize DFSDM and register the ADC drivers for DFSDM filters.
*
****************************************************************************/
#if defined(CONFIG_ADC) && defined(CONFIG_STM32L4_DFSDM)
int stm32_dfsdm_setup(void);
#endif
/****************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins.
*
****************************************************************************/
void stm32_spiinitialize(void);
/****************************************************************************
* Name: stm32l4_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins.
*
****************************************************************************/
void stm32l4_usbinitialize(void);
#endif /* __BOARDS_ARM_STM32L4_STM32L4R9AI_DISCO_SRC_STM32L4R9AI_DISCO_H */
Reference in New Issue View Git Blame Copy Permalink