227 lines
8.6 KiB
C
227 lines
8.6 KiB
C
/************************************************************************************
|
|
* configs/tm4c1294-launchpad/include/board.h
|
|
*
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H
|
|
#define __CONFIGS_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* Crystals on-board the EK-TM4C1294XL include:
|
|
*
|
|
* 1. 25.0MHz (Y2) is connected to OSC0/1 pins and is used as the run mode input to
|
|
* the PLL.
|
|
* 2. 32.768kHz (Y3) connected to XOSC0/1 and clocks the hibernation module.
|
|
*/
|
|
|
|
#define SYSCON_RCC_XTAL SYSCON_RCC_XTAL16000KHZ /* On-board crystal is 25 MHz */
|
|
#define XTAL_FREQUENCY 25000000
|
|
|
|
/* Frequencies of other clock sources */
|
|
|
|
#define PIOSC_FREQUENCY 16000000 /* Precision internal oscillator */
|
|
#define RTCOSC_FREQUENCY 32768 /* Hibernation module RTC oscillator */
|
|
#define LFIOSC_FREQUENCY 33000 /* Low frequency internal oscillator */
|
|
|
|
/* The PLL generates Fvco according to the following formulae. The input clock to
|
|
* the PLL may be either the external crystal (Fxtal) or PIOSC (Fpiosc). This
|
|
* logic supports only the external crystal as the PLL source clock.
|
|
*
|
|
* Fin = Fxtal / (Q + 1 )(N + 1) -OR- Fpiosc / (Q + 1)(N + 1)
|
|
* Mdiv = Mint + (MFrac / 1024)
|
|
* Fvco = Fin * Mdiv
|
|
*
|
|
* Where the register fields Q and N actually hold (Q-1) and (N-1). The following
|
|
* setup then generates Fvco = 480MHz:
|
|
*
|
|
* Fin = 25 MHz / 1 / 5 = 5 MHz
|
|
* Mdiv = 96
|
|
* Fvco = 480
|
|
*/
|
|
|
|
#define BOARD_PLL_MINT 96 /* Integer part of PLL M value */
|
|
#define BOARD_PLL_MFRAC 0 /* Fractional part of PLL M value */
|
|
#define BOARD_PLL_N 5 /* PLL N value */
|
|
#define BOARD_PLL_Q 1 /* PLL Q value */
|
|
|
|
#define BOARD_FVCO_FREQUENCY 480000000 /* Resulting Fvco */
|
|
|
|
/* When the PLL is active, the system clock frequency (SysClk) is calculated using
|
|
* the following equation:
|
|
*
|
|
* SysClk = Fvco/ (sysdiv + 1)
|
|
*
|
|
* The following setup generates Sysclk = 120MHz:
|
|
*/
|
|
|
|
#define BOARD_PLL_SYSDIV 4 /* Sysclk = Fvco / 4 = 120MHz */
|
|
#define SYSCLK_FREQUENCY 120000000 /* Resulting SysClk frequency */
|
|
|
|
/* Alternate Clock (ALTCLK)
|
|
*
|
|
* The ALTCLK provides a clock source of numerous frequencies to the general-purpose
|
|
* timer, SSI, and UART modules. The default source for the ALTCLK is the Precision
|
|
* Internal Oscillator (PIOSC). The Hibernation Real-time Clock (RTCOSC) and Low
|
|
* Frequency Internal Oscillator (LFIOSC) are alternatives. If the RTCOSC Output is
|
|
* selected, the clock source must also be enabled in the Hibernation module.
|
|
*/
|
|
|
|
#define BOARD_ALTCLKCFG SYSCON_ALTCLKCFG_ALTCLK_PIOSC
|
|
#define ALTCLK_FREQUENCY PIOSC_FREQUENCY
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The EK-TM4C1294XL has 5 green LEDs.
|
|
* LED D0 is lit when 3.3V power supply is available .
|
|
* LEDs D1 and D2 are general purpose LEDs.
|
|
* LEDs D3 and D4 can be used for Ethernet link and activity.
|
|
*
|
|
* --- ------------
|
|
* Pin Pin Function
|
|
* --- ------------
|
|
* PN1 green LED D1
|
|
* PN0 green LED D2
|
|
* PF4 green LED D3
|
|
* PF0 green LED D4
|
|
* --- ------------
|
|
*/
|
|
|
|
/* LED index values for use with tiva_setled() */
|
|
|
|
#define BOARD_LED_D1 0
|
|
#define BOARD_LED_D2 1
|
|
#define BOARD_LED_D3 2
|
|
#define BOARD_LED_D4 3
|
|
#define BOARD_NLEDS 4
|
|
|
|
/* LED bits for use with tiva_setleds() */
|
|
|
|
#define BOARD_LED_D1_BIT (1 << BOARD_LED_D1)
|
|
#define BOARD_LED_D2_BIT (1 << BOARD_LED_D2)
|
|
#define BOARD_LED_D3_BIT (1 << BOARD_LED_D3)
|
|
#define BOARD_LED_D4_BIT (1 << BOARD_LED_D4)
|
|
|
|
/* If CONFIG_ARCH_LEDS is defined, then automated support for the EK-TM4C1294XL LED
|
|
* will be included in the build:
|
|
*/
|
|
/* LED1 LED2 LED3 LED4 */
|
|
#define LED_STARTED 1 /* ON OFF NC NC */
|
|
#define LED_HEAPALLOCATE 0 /* NC NC NC NC */
|
|
#define LED_IRQSENABLED 0 /* NC NC NC NC */
|
|
#define LED_STACKCREATED 2 /* ON ON NC NC */
|
|
#define LED_INIRQ 0 /* NC NC NC NC */
|
|
#define LED_SIGNAL 0 /* NC NC NC NC */
|
|
#define LED_ASSERTION 0 /* NC NC NC NC */
|
|
#define LED_PANIC 3 /* OFF ON NC NC (flashing 2Hz) */
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* There are four push buttons on the board. Two of them are user controllable.
|
|
* The others are RESET and WAKE
|
|
*
|
|
* --- ------------
|
|
* Pin Pin Function
|
|
* --- ------------
|
|
* PJ0 USR_SW1
|
|
* PJ1 USR_SW2
|
|
* --- ------------
|
|
*/
|
|
|
|
#define BUTTON_SW1 0
|
|
#define BUTTON_SW2 1
|
|
#define NUM_BUTTONS 2
|
|
|
|
#define BUTTON_SW1_BIT (1 << BUTTON_SW1)
|
|
#define BUTTON_SW2_BIT (1 << BUTTON_SW2)
|
|
|
|
/* Pin Multiplexing Disambiguation **************************************************/
|
|
/* Ethernet LEDs
|
|
*
|
|
* PF0/PF4/PF1 are used for Ethernet LEDs.
|
|
* PF0/EN0LED0/LED4 Ethernet link OK
|
|
* PF4/EN0LED1/LED3 Ethernet TX/RX activity
|
|
* PF1/EN0LED2 Ethernet 100-base TX
|
|
*/
|
|
|
|
#define GPIO_EN0_LED0 GPIO_EN0_LED0_1
|
|
#define GPIO_EN0_LED1 GPIO_EN0_LED1_1
|
|
#define GPIO_EN0_LED2 GPIO_EN0_LED2_1
|
|
|
|
/************************************************************************************
|
|
* Public Function Prototypes
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/************************************************************************************
|
|
* Name: tiva_boardinitialize
|
|
*
|
|
* Description:
|
|
* All Tiva architectures must provide the following entry point. This entry
|
|
* point is called early in the initialization -- after all memory has been
|
|
* configured and mapped but before any devices have been initialized.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void tiva_boardinitialize(void);
|
|
|
|
/************************************************************************************
|
|
* Name: tiva_ledinit, tiva_setled, and tiva_setleds
|
|
*
|
|
* Description:
|
|
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LED. If
|
|
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
|
|
* control the LEDs from user applications.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef CONFIG_ARCH_LEDS
|
|
void tiva_ledinit(void);
|
|
void tiva_setled(int led, bool ledon);
|
|
void tiva_setleds(uint8_t ledset);
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_TM4C1294_LAUNCHPAD_INCLUDE_BOARD_H */
|