nuttx

a1x

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

am335x

arch/arm/include/amm335x: Trivial, cosmetic changes after review

2019-01-08 08:15:04 -06:00

arm

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

armv6-m

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

armv7-a

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

armv7-m

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

armv7-r

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

c5471

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

cxd56xx

Merged in alinjerpelea/nuttx (pull request #935 )

2019-07-04 14:02:05 +00:00

dm320

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

efm32

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

imx1

i.MX6: Add IRQ header file

2016-02-28 14:07:53 -06:00

imx6

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

imxrt

Merged imxrt1020 into master

2019-04-30 16:08:46 -06:00

kinetis

Merged in dagar/nuttx/pr-kinetic_minor_fix (pull request #820 )

2019-01-19 15:39:46 +00:00

kl

arch/: Clean up some naming and spacing.

2018-06-20 15:38:06 -06:00

lc823450

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

lpc11xx

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

lpc17xx

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

lpc31xx

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

lpc43xx

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

lpc54xx

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

lpc214x

Fix names of pre-processor variables used in header file idempotence

2016-08-06 18:48:45 -06:00

lpc2378

Fix names of pre-processor variables used in header file idempotence

2016-08-06 18:48:45 -06:00

max326xx

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

moxart

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

nrf52

arch/arm/include/nrf52/ and arch/arm/src/nrf52: 1. Added 52840 family support 2. Use common irq and memory layout header file for 52832 & 52840.

2019-03-12 09:43:49 -06:00

nuc1xx

Cosmetic changes to spacing and comments.

2017-04-20 14:08:08 -06:00

sam34

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

sama5

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

samd2l2

Rename all usage of samdl/SAMDL to samd2l2/SAMD2L2 to make room in the name space for the forthcoming samd5e5/SAMD5E5

2018-07-22 15:54:12 -06:00

samd5e5

configs/metro-m4: Fix RxD interrupt pin selection. The number SERCOM interrupts do not refer to PAD numbers, but to bit positions in the INFLAG register (very tiny footnote in the data sheet). With with final fix, the basic NSH configuration appears fully functional.

2018-09-01 15:29:22 -06:00

samv7

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

stm32

Merged in raiden00/nuttx_pe (pull request #796 )

2019-01-02 12:12:28 +00:00

stm32f0l0g0

Rename STM32F0L0 to STM32F0L0G0 since it now alsow supports the STM32G0 thanks to Mateusz Szafoni's contribution

2019-05-27 08:16:24 -06:00

stm32f7

*Merged in zhoukejun/nuttx_nucleo-f767zi (pull request #838 )

2019-03-11 03:44:57 +00:00

stm32h7

arch/arm/src/stm32h7/: Add stm32h7 ethernet driver. This is the initial push for the ethernet driver. The driver has been tested to be working on a nucleo board. This is still WIP, it doesn't for example do MAC filtering on HW level, but just receives all ethernet packets.

2019-04-30 08:43:39 -06:00

stm32l4

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

str71x

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

tiva

arch/arm/include/tiva and src/tiva: Improve GPIO interrupt support by removing unnecessary, hard-coded per-MCU defines and using the existing Kconfig configuration options instead.

2018-12-31 07:19:30 -06:00

tms570

arch/arm/include/tms570, arm/src/armv7-r, and arm/src/tms570: Adds support for the TMS570LS3137ZWT and corrects seversl ARMv7-R and TMS570 issues

2018-04-18 08:58:36 -06:00

xmc4

In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.

2018-12-03 17:41:59 -06:00

.gitignore

…

arch.h

Standardize the width of all comment boxes in header files

2015-10-02 17:42:29 -06:00

elf.h

arch/arm/include/syscall.h: Add missing inclusion of arch/armv7-r/syscall.h for CortexR.

2019-01-26 07:43:31 -06:00

inttypes.h

Add architecture-specific inttypes.h

2016-10-27 16:01:38 -04:00

irq.h

arch/arm: Add the initial cortex-a7 archtiecture support

2019-03-19 11:51:29 -06:00

limits.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

spinlock.h

arch/arm: Add the initial cortex-a7 archtiecture support

2019-03-19 11:51:29 -06:00

stdarg.h

…

syscall.h

arch/arm: Add the initial cortex-a7 archtiecture support

2019-03-19 11:51:29 -06:00

tls.h

TLS: Forgot to add a file before last commit

2016-03-11 12:30:04 -06:00

types.h

Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()

2016-02-14 16:11:25 -06:00