239 lines
8.4 KiB
C
239 lines
8.4 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32/nucleo-f412zg/include/board.h
|
|
*
|
|
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
|
* Author: Konstantin Berezenko <kpberezenko@gmail.com>
|
|
*
|
|
* based on boards/nucleo-f4x1re/include/board.h
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32_NUCLEO_F412ZG_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32_NUCLEO_F412ZG_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
#include <stm32.h>
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
* LSI - 32 KHz RC
|
|
* HSE - 8 MHz Crystal
|
|
* LSE - not installed
|
|
*/
|
|
|
|
#define STM32_BOARD_USEHSE 1
|
|
#define STM32_BOARD_XTAL 8000000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
|
|
/* Main PLL Configuration */
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(384)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_4
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(8)
|
|
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(2)
|
|
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
|
|
|
|
#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
|
|
#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
|
|
|
|
#define STM32_SYSCLK_FREQUENCY 96000000ul
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (96MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (96MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK */
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY)
|
|
|
|
/* Timers driven from APB2 will be PCLK2 since no prescale division */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM9_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM10_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM11_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
*/
|
|
|
|
#define BOARD_TIM2_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM3_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM4_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM5_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM6_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM7_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
|
#define BOARD_TIM8_FREQUENCY (2 * STM32_PCLK2_FREQUENCY)
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* USART2:
|
|
* RXD: PD6 CN9 pin 4
|
|
* TXD: PD5 CN9 pin 6
|
|
*/
|
|
|
|
# define GPIO_USART2_RX GPIO_USART2_RX_2
|
|
# define GPIO_USART2_TX GPIO_USART2_TX_2
|
|
|
|
/* USART6:
|
|
* RXD: PG9 CN10 pin 16
|
|
* TXD: PG14 CN10 pin 14
|
|
*/
|
|
|
|
#define GPIO_USART6_RX GPIO_USART6_RX_2
|
|
#define GPIO_USART6_TX GPIO_USART6_TX_2
|
|
|
|
/* I2C1:
|
|
* SCL: PB8 CN7 pin2
|
|
* SDA: PB9 CN7 pin4
|
|
*/
|
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
|
|
|
|
#define GPIO_I2C1_SCL_GPIO \
|
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
|
|
#define GPIO_I2C1_SDA_GPIO \
|
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
|
|
|
|
/* SPI1:
|
|
* MISO: PA6 CN7 pin 12
|
|
* MOSI: PA7 CN7 pin 14
|
|
* SCK: PA5 CN7 pin 10
|
|
*/
|
|
|
|
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
|
|
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
|
|
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
|
|
|
|
/* CAN1:
|
|
* RX: PD0 CN9 pin 25
|
|
* TX: PD1 CN9 pin 27
|
|
*/
|
|
|
|
#define GPIO_CAN1_RX GPIO_CAN1_RX_3
|
|
#define GPIO_CAN1_TX GPIO_CAN1_TX_3
|
|
|
|
/* LEDs
|
|
*
|
|
* The NUCLEO-F412ZG board has 3 user leds.
|
|
* LD1: PB0 GREEN
|
|
* LD2: PB7 BLUE
|
|
* LD3: PB14 RED
|
|
*/
|
|
|
|
#define BOARD_NLEDS 3
|
|
|
|
#define GPIO_LD1 \
|
|
(GPIO_PORTB | GPIO_PIN0 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
|
|
GPIO_SPEED_50MHz)
|
|
|
|
#define GPIO_LD2 \
|
|
(GPIO_PORTB | GPIO_PIN7 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
|
|
GPIO_SPEED_50MHz)
|
|
|
|
#define GPIO_LD3 \
|
|
(GPIO_PORTB | GPIO_PIN14 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
|
|
GPIO_SPEED_50MHz)
|
|
|
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
|
* defined. In that case, the usage by the board port is defined in
|
|
* include/board.h and src/sam_leds.c. The LEDs are used to encode OS-related
|
|
* events as follows when the red LED (PE24) is available:
|
|
*
|
|
* SYMBOL Meaning
|
|
* ------------------- -----------------------
|
|
* LED_STARTED NuttX has been started
|
|
* LED_HEAPALLOCATE Heap has been allocated
|
|
* LED_IRQSENABLED Interrupts enabled
|
|
* LED_STACKCREATED Idle stack created
|
|
* LED_INIRQ In an interrupt
|
|
* LED_SIGNAL In a signal handler
|
|
* LED_ASSERTION An assertion failed
|
|
* LED_PANIC The system has crashed
|
|
* LED_IDLE MCU is is sleep mode
|
|
*
|
|
* Thus if LD2, NuttX has successfully booted and is, apparently, running
|
|
* normally. If LD2 is flashing at approximately 2Hz, then a fatal error
|
|
* has been detected and the system has halted.
|
|
*/
|
|
|
|
#define LED_STARTED 1
|
|
#define LED_HEAPALLOCATE 0
|
|
#define LED_IRQSENABLED 0
|
|
#define LED_STACKCREATED 3
|
|
#define LED_INIRQ 0
|
|
#define LED_SIGNAL 0
|
|
#define LED_ASSERTION 1
|
|
#define LED_PANIC 1
|
|
|
|
#endif /* __BOARDS_ARM_STM32_NUCLEO_F412ZG_INCLUDE_BOARD_H */
|