nuttx

History

Alin Jerpelea f8aed9864d NuttX: Max Holtzberg: update licenses to Apache Max Holtzberg has submitted the ICLA and we can migrate the licenses to Apache. Gregory Nutt has submitted the SGA and we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>		2021-04-01 12:13:12 -05:00
..
configs/usbnsh	fs: delete NFILE_DESCRIPTORS for allocating dynamically	2021-03-17 06:46:42 -07:00
include	boards: nxstyle fixes	2021-03-20 19:22:58 -07:00
scripts	board: stm32: Author Gregory Nutt: update licenses to Apache	2021-03-20 19:22:58 -07:00
src	NuttX: Max Holtzberg: update licenses to Apache	2021-04-01 12:13:12 -05:00
Kconfig	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00
README.txt	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.