7e8424903a
This adds a sensor driver for the hyt271, hyt221, and hyt939 sensor module from vendor iST (Innovative Sensor Technology). This sensor type is connected via i2c bus and allows the measurement of relative humidity and temperature. Each driver instance supports two different character device for each type (/dev/sensor/tempX and /dev/sensor/humiX). This driver also supports changing the i2c address of one connected sensor on the bus. This requires a callback to the platform-specific board logic which must ensure a power-on reset. Optional the driver allows setting up a read interval for fetching sensor data. This is done by a worker thread and can be useful when watching several sensors via poll() by the userspace application. Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
310 lines
5.3 KiB
Plaintext
310 lines
5.3 KiB
Plaintext
############################################################################
|
|
# drivers/sensors/Make.defs
|
|
#
|
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
|
# contributor license agreements. See the NOTICE file distributed with
|
|
# this work for additional information regarding copyright ownership. The
|
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
# "License"); you may not use this file except in compliance with the
|
|
# License. You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
# License for the specific language governing permissions and limitations
|
|
# under the License.
|
|
#
|
|
############################################################################
|
|
|
|
# Include sensor drivers
|
|
|
|
ifeq ($(CONFIG_SENSORS),y)
|
|
|
|
CSRCS += sensor.c
|
|
|
|
ifeq ($(CONFIG_SENSORS_WTGAHRS2),y)
|
|
CSRCS += wtgahrs2.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_FAKESENSOR),y)
|
|
CSRCS += fakesensor.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_HCSR04),y)
|
|
CSRCS += hc_sr04.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_ADXL345),y)
|
|
CSRCS += adxl345_base.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_DHTXX),y)
|
|
CSRCS += dhtxx.c
|
|
endif
|
|
|
|
# These drivers depend on I2C support
|
|
|
|
ifeq ($(CONFIG_I2C),y)
|
|
|
|
ifeq ($(CONFIG_SENSORS_APDS9960),y)
|
|
CSRCS += apds9960.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_AK09912),y)
|
|
CSRCS += ak09912.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_AS5048B),y)
|
|
CSRCS += as5048b.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_AS726X),y)
|
|
CSRCS += as726x.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_FXOS8700CQ),y)
|
|
CSRCS += fxos8700cq.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_HYT271),y)
|
|
CSRCS += hyt271.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_KXTJ9),y)
|
|
CSRCS += kxtj9.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LIS2DH),y)
|
|
CSRCS += lis2dh.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LIS331DL),y)
|
|
CSRCS += lis331dl.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LSM303AGR),y)
|
|
CSRCS += lsm303agr.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LSM6DSL),y)
|
|
CSRCS += lsm6dsl.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LSM9DS1),y)
|
|
CSRCS += lsm9ds1.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LPS25H),y)
|
|
CSRCS += lps25h.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ADXL345_I2C),y)
|
|
CSRCS += adxl345_i2c.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BH1750FVI),y)
|
|
CSRCS += bh1750fvi.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BMG160),y)
|
|
CSRCS += bmg160.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BMI160),y)
|
|
CSRCS += bmi160.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BMP180),y)
|
|
CSRCS += bmp180.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BMP280),y)
|
|
CSRCS += bmp280.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_ISL29023),y)
|
|
CSRCS += isl29023.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_HTS221),y)
|
|
CSRCS += hts221.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LM75_I2C),y)
|
|
CSRCS += lm75.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LM92),y)
|
|
CSRCS += lm92.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MAX44009),y)
|
|
CSRCS += max44009.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MB7040),y)
|
|
CSRCS += mb7040.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MCP9844),y)
|
|
CSRCS += mcp9844.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MLX90393),y)
|
|
CSRCS += mlx90393.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MLX90614),y)
|
|
CSRCS += mlx90614.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MS58XX),y)
|
|
CSRCS += ms58xx.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LTC4151),y)
|
|
CSRCS += ltc4151.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_INA219),y)
|
|
CSRCS += ina219.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_INA226),y)
|
|
CSRCS += ina226.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_INA3221),y)
|
|
CSRCS += ina3221.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_SCD30),y)
|
|
CSRCS += scd30.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_SGP30),y)
|
|
CSRCS += sgp30.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_AHT10),y)
|
|
CSRCS += aht10.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_SHT21),y)
|
|
CSRCS += sht21.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_SHT3X),y)
|
|
CSRCS += sht3x.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_SPS30),y)
|
|
CSRCS += sps30.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_T67XX),y)
|
|
CSRCS += t67xx.c
|
|
endif
|
|
|
|
endif # CONFIG_I2C
|
|
|
|
# These drivers depend on SPI support
|
|
|
|
ifeq ($(CONFIG_SPI),y)
|
|
|
|
ifeq ($(CONFIG_ADXL345_SPI),y)
|
|
CSRCS += adxl345_spi.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_ADXL372),y)
|
|
CSRCS += adxl372.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LIS3DSH),y)
|
|
CSRCS += lis3dsh.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LIS3DH),y)
|
|
CSRCS += lis3dh.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MAX31855),y)
|
|
CSRCS += max31855.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MAX6675),y)
|
|
CSRCS += max6675.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MPL115A),y)
|
|
CSRCS += mpl115a.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LIS3MDL),y)
|
|
CSRCS += lis3mdl.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_LSM330SPI),y)
|
|
CSRCS += lsm330_spi.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_L3GD20),y)
|
|
CSRCS += l3gd20.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_ADT7320),y)
|
|
CSRCS += adt7320.c
|
|
endif
|
|
|
|
endif # CONFIG_SPI
|
|
|
|
ifeq ($(CONFIG_SENSORS_MPU60X0),y)
|
|
CSRCS += mpu60x0.c
|
|
endif
|
|
|
|
# Quadrature encoder upper half
|
|
|
|
ifeq ($(CONFIG_SENSORS_QENCODER),y)
|
|
CSRCS += qencoder.c
|
|
endif
|
|
|
|
# Vishay VEML6070
|
|
|
|
ifeq ($(CONFIG_SENSORS_VEML6070),y)
|
|
CSRCS += veml6070.c
|
|
endif
|
|
|
|
# ST VL53L1X
|
|
|
|
ifeq ($(CONFIG_SENSORS_VL53L1X),y)
|
|
CSRCS += vl53l1x.c
|
|
endif
|
|
|
|
# Sensixs XEN1210
|
|
|
|
ifeq ($(CONFIG_SENSORS_XEN1210),y)
|
|
CSRCS += xen1210.c
|
|
endif
|
|
|
|
# Zero Cross upper half
|
|
|
|
ifeq ($(CONFIG_SENSORS_ZEROCROSS),y)
|
|
CSRCS += zerocross.c
|
|
endif
|
|
|
|
# TI HDC1008
|
|
|
|
ifeq ($(CONFIG_SENSORS_HDC1008),y)
|
|
CSRCS += hdc1008.c
|
|
endif
|
|
|
|
# Include sensor driver build support
|
|
|
|
DEPPATH += --dep-path sensors
|
|
VPATH += :sensors
|
|
CFLAGS += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)sensors}
|
|
|
|
endif # CONFIG_SENSORS
|