nuttx

History

Gregory Nutt 9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories.

2018-05-19 16:46:21 -06:00

1wire

ds28e17.h edited online with Bitbucket

2018-04-05 12:08:56 +00:00

analog

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

audio

Merged in masayuki2009/nuttx.nuttx/change_copyright (pull request #621 )

2018-04-04 12:35:47 +00:00

binfmt

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

can

MCP1515: Eliminate some warnings

2017-06-14 09:38:58 -06:00

contactless

Add an instance argument to the SPIDEV definitions.

2017-04-29 12:26:52 -06:00

crypto

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

drivers

This commit adds a 1wire subsystem.

2018-04-04 10:57:36 -06:00

eeprom

drivers/eeprobom: EEPROM driver for AT24xx compatible EEPROMs.

2018-02-14 07:53:01 -06:00

fs/cromfs and tools/gencromfs: Various fixes for traversal relative file paths. Biggest changes is in types used: Cannot use size_t or mode_t in common structures because they have different sizes on the (64-bit) host and the (32-bit) target. Use uint32_t instead of size_t for offsets. Use uint16_t instead of mode_t.

2018-03-20 12:37:01 -06:00

i2c

i2c/i2c_master.h: Change incorrect comment about I2C_TRANSFER return value to indicate that the method returns zero on success rather than the number of bytes transferred.

2018-03-22 06:51:09 -06:00

input

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

ioexpander

configs/stm32f103-minimum: Remove nonsensical #error.

2018-01-09 11:17:01 -06:00

lcd

drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories.

2018-05-19 16:46:21 -06:00

leds

Costmetic changes from review of last PR.

2018-05-02 16:29:22 -06:00

lib

libm: Port gamma() and lgamma() from FreeBSD to NuttX.

2017-08-08 07:02:39 -06:00

mm: Add a debug assertin to check for integer overflow in malloc.

2017-11-21 07:24:10 -06:00

modem

include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique

2016-09-16 09:39:51 -06:00

mtd

/include/nuttx/mtd/configdata.h: Fix copy-paste comment in configdata.h

2018-05-08 09:09:47 -06:00

net

include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies.

2018-04-29 12:43:09 -06:00

Make sure that labeling is used consistently in all function headers (part 3).

2018-02-01 12:17:03 -06:00

power

Merged in raiden00/nuttx (pull request #626 )

2018-04-09 12:59:28 +00:00

sensors

Merged in antmerlino/nuttx/ina3221 (pull request #636 )

2018-05-02 22:29:59 +00:00

serial

Squashed commit of the following:

2017-07-28 12:01:05 -06:00

spi

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

syslog

Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.

2018-03-04 08:07:07 -06:00

timers

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

usb

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

video

include/nuttx/fb.h: Fix a type _BEND -> _BLEND

2018-05-18 13:36:58 -06:00

wireless

include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies.

2018-04-29 12:43:09 -06:00

.gitignore

…

addrenv.h

Move include/nuttx/mm.h to include/nuttx/mm/mm.h

2014-09-24 07:29:09 -06:00

arch.h

sched/sched: Implements a global scheduler lock capability as part of SMP support. This allows the scheduler to be locked with no knowledge or access to the TCB of the currently running task. This is necessary because accessing the TCB of the currenlty running task is, itself, a non-atomic operation. This global scheduler lock cpability was add just to support that atomic access to the TCB.

2018-02-05 13:12:36 -06:00

ascii.h

ASCII: Improve some naming

2016-04-14 16:20:36 -06:00

board.h

This commit eliminates the BOARDIOC_TSCTEST_SETUP command.

2018-01-17 09:33:28 -06:00

cancelpt.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

clock.h

Update some comments.

2018-03-14 08:17:50 -06:00

compiler.h

compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.

2017-10-02 07:09:31 -06:00

init.h

enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized

2016-05-18 09:17:01 -06:00

irq.h

spin_lock_irqsave() and spin_unlock_irqrestore() are only valid if the CPU supports global disabling of interrupts.

2018-02-04 15:41:22 -06:00

kmalloc.h

profcs: At file to should user space heap. This replaces the NSH free command.

2017-11-13 12:51:33 -06:00

kthread.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

mmcsd.h

Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.

2017-01-31 09:16:01 -06:00

module.h

Module names are not needed in libc/modlib when the module library is used only for shared library support.

2017-01-29 12:23:24 -06:00

mqueue.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

page.h

Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).

2014-09-28 10:15:33 -06:00

pgalloc.h

mm/mm_gran: Add a function to get information about the state of the granuale allocator.

2017-11-14 14:41:03 -06:00

poff.h

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

progmem.h

progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical.

2018-05-01 06:23:52 -06:00

pthread.h

Move cancellation point definitions to their own header file.

2016-12-10 09:08:26 -06:00

random.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

sched_note.h

Update ChangeLog in prep for 7.20 release.

2017-03-08 10:09:48 -06:00

sched.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

scsi.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sdio.h

arch/arm/src/lkpc54xx: In SDMMC driver, fix an error which was clobbering the interrupt mask register (xfrmask). Also, add a kludge for the missing DTO interrupt.

2017-12-20 18:39:10 -06:00

semaphore.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

signal.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

spawn.h

…

spinlock.h

armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.

2018-02-04 12:22:03 -06:00

streams.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

symtab.h

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

time.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

tls.h

TLS: Simplify

2016-03-11 07:17:32 -06:00

tree.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00

userspace.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

vt100.h

Add ANSI/VT100 color codes

2014-11-10 15:10:57 -06:00

wdog.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

wqueue.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

zoneinfo.h

include/: Remove dangling space at the end of lines.

2017-06-28 13:30:08 -06:00