2ffc2ab875
Master * smps.c: fix error messages * stm32f33xxx_hrtim.h: fix definition * stm32_hrtim: fix pclk calculation * stm32_hrtim.c: cosmetics * smps.h: cosmetics * add upper-half driver for high power LED driver (powerled) * stm32f334-disco: beginning of lower half driver for high power LED (powerled) Approved-by: Gregory Nutt <gnutt@nuttx.org>
294 lines
10 KiB
C
294 lines
10 KiB
C
/****************************************************************************
|
|
* configs/stm32f334-disco/include/board.h
|
|
* include/arch/board/board.h
|
|
*
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
|
* Author: Mateusz Szafoni <raiden00@railab.me>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __CONFIG_STM32F334_DISCO_INCLUDE_BOARD_H
|
|
#define __CONFIG_STM32F334_DISCO_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
#ifdef __KERNEL__
|
|
# include "stm32.h"
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* HSI - Internal 8 MHz RC Oscillator
|
|
* LSI - 32 KHz RC
|
|
* HSE - 8 MHz from MCO output of ST-LINK
|
|
* LSE - 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 8000000ul
|
|
#define STM32_LSI_FREQUENCY 32000 /* Between 30kHz and 60kHz */
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768 /* X2 on board */
|
|
|
|
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
|
|
|
|
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
|
#define STM32_CFGR_PLLXTPRE 0
|
|
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
|
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLL */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB2 timers 1, 8, 15-17 and HRTIM1 will receive PCLK2. */
|
|
|
|
/* Timers driven from APB2 will be PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM15_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM16_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM17_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_THRTIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB1 timers 2-7 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
*/
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM15_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM16_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM17_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_HRTIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_LED2 1
|
|
#define BOARD_LED3 2
|
|
#define BOARD_LED4 3
|
|
#define BOARD_NLEDS 4
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
#define BOARD_LED4_BIT (1 << BOARD_LED4)
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
|
|
* stm32f334-disco. The following definitions describe how NuttX controls the LEDs:
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* LED1 */
|
|
#define LED_HEAPALLOCATE 1 /* LED2 */
|
|
#define LED_IRQSENABLED 2 /* LED1 + LED2 */
|
|
#define LED_STACKCREATED 3 /* LED3 */
|
|
#define LED_INIRQ 4 /* LED1 + LED3 */
|
|
#define LED_SIGNAL 5 /* LED2 + LED3 */
|
|
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
|
|
#define LED_PANIC 7 /* N/C + N/C + N/C + LED4 */
|
|
|
|
/* Button definitions *******************************************************/
|
|
/* The STM32F334-DISCO supports two buttons; only one button is controllable
|
|
* by software:
|
|
*
|
|
* B1 USER: user button connected to the I/O PA0 of the STM32F334R8.
|
|
* B2 RESET: push button connected to NRST is used to RESET the
|
|
* STM32F334R8.
|
|
*/
|
|
|
|
#define BUTTON_USER 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
/* CAN */
|
|
|
|
#define GPIO_CAN1_RX GPIO_CAN_RX_2
|
|
#define GPIO_CAN1_TX GPIO_CAN_TX_2
|
|
|
|
/* I2C */
|
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_3
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_3
|
|
|
|
/* SPI */
|
|
|
|
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
|
|
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
|
|
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
|
|
|
|
/* TIM */
|
|
|
|
#define GPIO_TIM2_CH2OUT GPIO_TIM2_CH2OUT_2
|
|
#define GPIO_TIM2_CH3OUT GPIO_TIM2_CH3OUT_3
|
|
|
|
#define GPIO_TIM3_CH1OUT GPIO_TIM3_CH1OUT_2
|
|
#define GPIO_TIM3_CH2OUT GPIO_TIM3_CH2OUT_4
|
|
|
|
#define GPIO_TIM4_CH1OUT GPIO_TIM4_CH1OUT_2
|
|
|
|
/* USART */
|
|
|
|
#define GPIO_USART2_RX GPIO_USART2_RX_3 /* PB4 */
|
|
#define GPIO_USART2_TX GPIO_USART2_TX_3 /* PB3 */
|
|
|
|
/* Board configuration for powerled example */
|
|
|
|
/* - Set HRTIM TIMC output 1 on PERIOD
|
|
* - Reset HRTIM TIMC output 1 on HRTIM EEV2.
|
|
* - HRTIM EEV2 is connected to COMP4 output which works as current limit.
|
|
* - COMP4 inverting input is connected to DAC1CH1 output.
|
|
* - COMP4 non-inverting input is connceted to current sense resitor (1 Ohm).
|
|
* - DAC1CH1 DMA transfer is triggered by HRTIM TIMC events, which is used
|
|
* to provide slope compensation
|
|
*/
|
|
|
|
#if defined(CONFIG_EXAMPLES_POWERLED)
|
|
|
|
/* Comparators configuration ************************************************/
|
|
|
|
#define COMP4_INM COMP_INMSEL_DAC1CH1
|
|
|
|
/* HRTIM configuration ******************************************************/
|
|
|
|
#define HRTIM_TIMC_PRESCALER HRTIM_PRESCALER_1
|
|
#define HRTIM_TIMC_MODE HRTIM_MODE_CONT
|
|
#define HRTIM_TIMC_DMA (HRTIM_DMA_REP|HRTIM_DMA_CMP1|HRTIM_DMA_CMP2| \
|
|
HRTIM_DMA_CMP3|HRTIM_DMA_CMP4)
|
|
#define HRTIM_TIMC_CH1_SET HRTIM_OUT_SET_PER
|
|
#define HRTIM_TIMC_CH1_RST HRTIM_OUT_RST_EXTEVNT2
|
|
#define HRTIM_TIMC_CH1_IDLE_STATE HRTIM_IDLE_INACTIVE
|
|
|
|
#define HRTIM_EEV_SAMPLING HRTIM_EEV_SAMPLING_d1
|
|
#define HRTIM_EEV2_SRC HRTIM_EEV_SRC_ANALOG
|
|
#define HRTIM_EEV2_FILTER HRTIM_EEV_DISABLE
|
|
#define HRTIM_EEV2_POL HRTIM_EEV_POL_HIGH
|
|
#define HRTIM_EEV2_SEN HRTIM_EEV_SEN_LEVEL
|
|
#define HRTIM_EEV2_MODE HRTIM_EEV_MODE_FAST
|
|
|
|
#define HRTIM_BURST_CLOCK HRTIM_BURST_CLOCK_HRTIM
|
|
#define HRTIM_BURST_PRESCALER HRTIM_BURST_PRESCALER_1
|
|
#define HRTIM_BURST_TRIGGERS 0
|
|
|
|
/* DMA channels *************************************************************/
|
|
|
|
/* DAC */
|
|
|
|
#define DAC1CH1_DMA_CHAN DMACHAN_HRTIM1_C
|
|
|
|
#endif /* CONFIG_EXAMPLES_POWERLED */
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Function Prototypes
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_boardinitialize
|
|
*
|
|
* Description:
|
|
* All STM32 architectures must provide the following entry point. This
|
|
* entry point is called early in the initialization -- after all memory
|
|
* has been configured and mapped but before any devices have been
|
|
* initialized.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void stm32_boardinitialize(void);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIG_STM32F334_DISCO_INCLUDE_BOARD_H */
|