sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
63c911fb56
nuttx/arch/xtensa/include/syscall.h
Xiang Xiao 44bd3212d4 arch: Remove SYS_RESERVED from Kconfg 
let's arch define the correct value instead

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-27 22:54:13 +08:00

379 lines
10 KiB
C
Raw Blame History

/****************************************************************************
* arch/xtensa/include/syscall.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This file should never be included directly but, rather, only indirectly
* through include/syscall.h or include/sys/sycall.h
*/
#ifndef __ARCH_XTENSA_INCLUDE_SYSCALL_H
#define __ARCH_XTENSA_INCLUDE_SYSCALL_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#ifdef CONFIG_LIB_SYSCALL
# include <syscall.h>
#endif
#include "xtensa_swi.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define SYS_syscall 0x00
/* The SYS_signal_handler_return is executed here... its value is not always
* available in this context and so is assumed to be 7.
*/
#ifndef SYS_signal_handler_return
# define SYS_signal_handler_return (7)
#elif SYS_signal_handler_return != 7
# error "SYS_signal_handler_return was assumed to be 7"
#endif
/* This logic uses three system calls {0,1,2} for context switching and one
* for the syscall return. So a minimum of four syscall values must be
* reserved. If CONFIG_BUILD_PROTECTED is defined, then four more syscall
* values must be reserved.
*/
#ifdef CONFIG_BUILD_PROTECTED
# define CONFIG_SYS_RESERVED 8
#else
# define CONFIG_SYS_RESERVED 4
#endif
/* Xtensa system calls ******************************************************/
/* SYS call 0:
*
* int xtensa_saveusercontext(uint32_t *saveregs);
*/
#define SYS_save_context (0)
/* SYS call 1:
*
* void xtensa_fullcontextrestore(uint32_t *restoreregs) noreturn_function;
*/
#define SYS_restore_context (1)
/* SYS call 2:
*
* void xtensa_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
*/
#define SYS_switch_context (2)
#ifdef CONFIG_LIB_SYSCALL
/* SYS call 3:
*
* void xtensa_syscall_return(void);
*/
#define SYS_syscall_return (3)
#endif /* CONFIG_LIB_SYSCALL */
#ifndef CONFIG_BUILD_FLAT
/* SYS call 4:
*
* void up_task_start(main_t taskentry, int argc, char *argv[])
* noreturn_function;
*/
#define SYS_task_start (4)
/* SYS call 5:
*
* void up_pthread_start(pthread_trampoline_t startup,
* pthread_startroutine_t entrypt, pthread_addr_t arg)
* noreturn_function
*/
#define SYS_pthread_start (5)
/* SYS call 6:
*
* void signal_handler(_sa_sigaction_t sighand, int signo,
* siginfo_t *info, void *ucontext);
*/
#define SYS_signal_handler (6)
/* SYS call 7:
*
* void signal_handler_return(void);
*/
#define SYS_signal_handler_return (7)
#endif /* !CONFIG_BUILD_FLAT */
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Inline functions
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: sys_call0
*
* Description:
* System call SYS_ argument and no additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call0(unsigned int nbr)
{
register long reg0 __asm__("a2") = (long)(nbr);
__asm__ __volatile__
(
"movi a3, %1\n"
"wsr a3, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0)
: "a3", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call1
*
* Description:
* System call SYS_ argument and one additional parameter.
*
****************************************************************************/
static inline uintptr_t sys_call1(unsigned int nbr, uintptr_t parm1)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a4, %1\n"
"wsr a4, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1)
: "a4", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call2
*
* Description:
* System call SYS_ argument and two additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call2(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg2 __asm__("a4") = (long)(parm2);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a5, %1\n"
"wsr a5, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1), "r"(reg2)
: "a5", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call3
*
* Description:
* System call SYS_ argument and three additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call3(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg3 __asm__("a5") = (long)(parm3);
register long reg2 __asm__("a4") = (long)(parm2);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a6, %1\n"
"wsr a6, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1), "r"(reg2),
"r"(reg3)
: "a6", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call4
*
* Description:
* System call SYS_ argument and four additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call4(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3,
uintptr_t parm4)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg4 __asm__("a6") = (long)(parm4);
register long reg3 __asm__("a5") = (long)(parm3);
register long reg2 __asm__("a4") = (long)(parm2);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a7, %1\n"
"wsr a7, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1), "r"(reg2),
"r"(reg3), "r"(reg4)
: "a7", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call5
*
* Description:
* System call SYS_ argument and five additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call5(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3,
uintptr_t parm4, uintptr_t parm5)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg5 __asm__("a7") = (long)(parm4);
register long reg4 __asm__("a6") = (long)(parm4);
register long reg3 __asm__("a5") = (long)(parm3);
register long reg2 __asm__("a4") = (long)(parm2);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a8, %1\n"
"wsr a8, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1), "r"(reg2),
"r"(reg3), "r"(reg4), "r"(reg5)
: "a8", "memory"
);
return reg0;
}
/****************************************************************************
* Name: sys_call6
*
* Description:
* System call SYS_ argument and six additional parameters.
*
****************************************************************************/
static inline uintptr_t sys_call6(unsigned int nbr, uintptr_t parm1,
uintptr_t parm2, uintptr_t parm3,
uintptr_t parm4, uintptr_t parm5,
uintptr_t parm6)
{
register long reg0 __asm__("a2") = (long)(nbr);
register long reg6 __asm__("a8") = (long)(parm4);
register long reg5 __asm__("a7") = (long)(parm4);
register long reg4 __asm__("a6") = (long)(parm4);
register long reg3 __asm__("a5") = (long)(parm3);
register long reg2 __asm__("a4") = (long)(parm2);
register long reg1 __asm__("a3") = (long)(parm1);
__asm__ __volatile__
(
"movi a9, %1\n"
"wsr a9, intset\n"
"isync\n"
: "=r"(reg0)
: "i"(XCHAL_SWINT_CALL), "r"(reg0), "r"(reg1), "r"(reg2),
"r"(reg3), "r"(reg4), "r"(reg5)
: "a9", "memory"
);
return reg0;
}
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_XTENSA_INCLUDE_SYSCALL_H */
Reference in New Issue View Git Blame Copy Permalink