nuttx/boards/arm/tiva/lm3s6432-s2e/include/board.h
Alin Jerpelea 40cd67eee6 boards: arm: Author Gregory Nutt: update licenses to Apache
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-18 22:58:27 -07:00

107 lines
3.8 KiB
C

/****************************************************************************
* boards/arm/tiva/lm3s6432-s2e/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_TIVA_LM3S6432_S2E_INCLUDE_BOARD_H
#define __BOARDS_ARM_TIVA_LM3S6432_S2E_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* RCC settings */
#define SYSCON_RCC_XTAL SYSCON_RCC_XTAL8000KHZ /* S2E on-board crystal is 8.00 MHz */
#define XTAL_FREQUENCY 8000000
/* Oscillator source is the main oscillator (not internal, internal/4,
* 30KHz or 30KHz from hibernate module)
*/
#define SYSCON_RCC_OSCSRC SYSCON_RCC_OSCSRC_MOSC
#define SYSCON_RCC2_OSCSRC SYSCON_RCC2_OSCSRC2_MOSC
#define OSCSRC_FREQUENCY XTAL_FREQUENCY
/* Use system divider = 4; this corresponds to a system clock frequency
* of (400 / 2) / 4 = 50MHz
*/
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Peripheral Clock (PCLK)
*
* Same frequency as the SYSCLK
*/
#define PCLK_FREQUENCY SYSCLK_FREQUENCY
/* Other RCC settings:
*
* - Main and internal oscillators enabled.
* - PLL and sys dividers not bypassed
* - PLL not powered down
* - No auto-clock gating reset
*/
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
* - PLL and sys dividers not bypassed.
* - PLL not powered down
* - Not using RCC2
*/
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions **********************************************************/
/* The S2E has two LEDs on PF2/PF3, shared with the Ethernet.
* In keeping with the other lm3s6xxx port, we use one of these for
* debugging.
* Below is the mapping of this single LED.
* From this single LED, we can get the following information:
*
* OFF Steady: The system has failed to boot to the point of
* enabling interrupts
* ON Steady: The systems has enabled interrupts,
* but none have been received
* Dull glow: The system is taking interrupts
* Slow blinking: The system has panicked
* ON OFF
*/
#define LED_STARTED 0 /* OFF OFF */
#define LED_HEAPALLOCATE 1 /* OFF OFF */
#define LED_IRQSENABLED 2 /* ON ON */
#define LED_STACKCREATED 3 /* ON ON */
#define LED_INIRQ 4 /* ON OFF */
#define LED_SIGNAL 5 /* ON OFF */
#define LED_ASSERTION 6 /* ON OFF */
#define LED_PANIC 7 /* ON OFF */
#endif /* __BOARDS_ARM_TIVA_LM3S6432_S2E_INCLUDE_BOARD_H */