| .. |
|
analog
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
audio
|
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
|
2014-08-31 16:24:24 -06:00 |
|
binfmt
|
Oops.. part of the last change will still in the editor
|
2014-11-12 18:33:07 -06:00 |
|
crypto
|
Move crypto header files from include/crypto to include/nuttx/crypto
|
2014-07-03 18:35:08 -06:00 |
|
eeprom
|
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
|
2014-12-05 09:13:34 -06:00 |
|
fs
|
Fixes warning about block_operations not being defined. From David Sidrane.
|
2014-12-30 06:19:30 -06:00 |
|
input
|
Update the ADXL345 interface following the current interface scheme
|
2014-12-16 11:45:28 -06:00 |
|
lcd
|
ili9341: update interface control definitions
|
2014-12-19 13:52:40 -06:00 |
|
mm
|
MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes
|
2014-11-02 12:11:20 -06:00 |
|
mtd
|
Added forward reference to eliminate warnings. From David Sidrane.
|
2014-12-30 06:20:40 -06:00 |
|
net
|
Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary
|
2015-01-17 05:59:13 -06:00 |
|
nx
|
Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville
|
2014-12-10 17:11:23 -06:00 |
|
power
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sensors
|
Update ChangeLog
|
2015-01-06 10:52:05 -06:00 |
|
sercomm
|
Move include/sercomm to include/nuttx/sercomm
|
2012-03-24 18:33:21 +00:00 |
|
serial
|
STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane
|
2014-12-27 18:58:18 -06:00 |
|
spi
|
Add ADXL345 accelerometer driver. From Alan Carvalho de Assis
|
2014-12-16 08:16:53 -06:00 |
|
syslog
|
ARMv7: Add support to use ITM for SYSLOG debug output
|
2014-10-22 09:03:00 -06:00 |
|
usb
|
USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts
|
2015-01-11 08:05:09 -06:00 |
|
video
|
STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review
|
2014-12-19 14:52:17 -06:00 |
|
wireless
|
Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis
|
2014-12-18 13:52:01 -06:00 |
|
.gitignore
|
Mostly updates and corrections to .gitignore files
|
2013-04-04 15:39:50 -06:00 |
|
addrenv.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
arch.h
|
Fixes to tickless operation code. From Brandon Warhurst
|
2014-10-23 06:41:31 -06:00 |
|
ascii.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
can.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
clock.h
|
last change alters semantics of __HAVE_KERNEL_GLOBALS
|
2014-08-30 14:44:48 -06:00 |
|
compiler.h
|
Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier.
|
2014-11-12 07:32:36 -06:00 |
|
configdata.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
float.h
|
lib/math files not follow coding standard; float, double, and long double versions in separate files to reduce size of dumb link
|
2012-10-28 18:42:09 +00:00 |
|
i2c.h
|
maXTouch: Check for successful memory allocation was backward
|
2014-07-07 09:55:39 -06:00 |
|
init.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
irq.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
kmalloc.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
kthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
lib.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
math.h
|
Change double_t to double in rint. Add rintf and rintl while we are at it
|
2014-06-28 10:14:29 -06:00 |
|
mmcsd.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
mqueue.h
|
Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes
|
2014-09-30 08:03:39 -06:00 |
|
page.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pgalloc.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
poff.h
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
progmem.h
|
STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin
|
2014-08-28 09:11:20 -06:00 |
|
pthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pwm.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
regex.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
rtc.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
rwbuffer.h
|
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
|
2014-07-11 16:19:17 -06:00 |
|
sched.h
|
strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.
|
2014-12-17 12:24:02 -06:00 |
|
scsi.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
sdio.h
|
STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y
|
2015-01-08 18:12:06 -06:00 |
|
semaphore.h
|
Complete re-implementation of mq_close
|
2014-09-29 15:33:34 -06:00 |
|
spawn.h
|
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
|
2013-01-18 01:52:42 +00:00 |
|
stdarg.h
|
Add a generic GCC stdarg.h header file
|
2012-07-08 14:50:43 +00:00 |
|
streams.h
|
Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog
|
2014-10-08 19:08:26 -06:00 |
|
time.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
timer.h
|
Timer driver updates from Bob Doiron
|
2014-05-05 14:40:19 -06:00 |
|
tree.h
|
Fix error in tree.h
|
2014-06-02 13:44:44 -06:00 |
|
userspace.h
|
Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK
|
2014-10-11 15:59:40 -06:00 |
|
vt100.h
|
Add ANSI/VT100 color codes
|
2014-11-10 15:10:57 -06:00 |
|
watchdog.h
|
SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers
|
2014-08-09 10:30:45 -06:00 |
|
wdog.h
|
Add support for statically allocated watchdog timer structures
|
2014-08-22 08:46:34 -06:00 |
|
wqueue.h
|
Fix warning caused by missing comment closing */. From David Sidrane.
|
2014-12-30 06:22:18 -06:00 |
