sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
666ee755da
nuttx/net/socket/net_sendfile.c

735 lines
22 KiB
C
Raw Blame History

/****************************************************************************
* net/socket/net_sendfile.c
*
* Copyright (C) 2013 UVC Ingenieure. All rights reserved.
* Copyright (C) 2007-2015 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Max Holtzberg <mh@uvc.de>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_NET_TCP)
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <debug.h>
#include <arch/irq.h>
#include <nuttx/clock.h>
#include <nuttx/fs/fs.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/tcp.h>
#include "netdev/netdev.h"
#include "devif/devif.h"
#include "arp/arp.h"
#include "neighbor/neighbor.h"
#include "tcp/tcp.h"
#include "socket/socket.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if defined(CONFIG_NET_TCP_SPLIT) && !defined(CONFIG_NET_TCP_SPLIT_SIZE)
# define CONFIG_NET_TCP_SPLIT_SIZE 40
#endif
#define TCPIPv4BUF ((struct tcp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv4_HDRLEN])
#define TCPIPv6BUF ((struct tcp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN])
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure holds the state of the send operation until it can be
* operated upon from the interrupt level.
*/
struct sendfile_s
{
FAR struct socket *snd_sock; /* Points to the parent socket structure */
FAR struct devif_callback_s *snd_datacb; /* Data callback */
FAR struct devif_callback_s *snd_ackcb; /* ACK callback */
FAR struct file *snd_file; /* File structure of the input file */
sem_t snd_sem; /* Used to wake up the waiting thread */
off_t snd_foffset; /* Input file offset */
size_t snd_flen; /* File length */
ssize_t snd_sent; /* The number of bytes sent */
uint32_t snd_isn; /* Initial sequence number */
uint32_t snd_acked; /* The number of bytes acked */
#ifdef CONFIG_NET_SOCKOPTS
uint32_t snd_time; /* Last send time for determining timeout */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: sendfile_timeout
*
* Description:
* Check for send timeout.
*
* Parameters:
* pstate send state structure
*
* Returned Value:
* TRUE:timeout FALSE:no timeout
*
* Assumptions:
* Running at the interrupt level
*
****************************************************************************/
#ifdef CONFIG_NET_SOCKOPTS
static inline int sendfile_timeout(FAR struct sendfile_s *pstate)
{
FAR struct socket *psock = 0;
/* Check for a timeout configured via setsockopts(SO_SNDTIMEO).
* If none... we well let the send wait forever.
*/
psock = pstate->snd_sock;
if (psock && psock->s_sndtimeo != 0)
{
/* Check if the configured timeout has elapsed */
return net_timeo(pstate->snd_time, psock->s_sndtimeo);
}
/* No timeout */
return FALSE;
}
#endif /* CONFIG_NET_SOCKOPTS */
static uint16_t ack_interrupt(FAR struct net_driver_s *dev, FAR void *pvconn,
FAR void *pvpriv, uint16_t flags)
{
FAR struct sendfile_s *pstate = (FAR struct sendfile_s *)pvpriv;
nllvdbg("flags: %04x\n", flags);
if ((flags & TCP_ACKDATA) != 0)
{
FAR struct tcp_hdr_s *tcp;
#ifdef CONFIG_NET_SOCKOPTS
/* Update the timeout */
pstate->snd_time = clock_systimer();
#endif
/* Get the offset address of the TCP header */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv6(dev->d_flags))
#endif
{
DEBUGASSERT(pstate->snd_sock == PF_INET6);
tcp = TCPIPv6BUF;
}
#endif /* CONFIG_NET_IPv6 */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
else
#endif
{
DEBUGASSERT(pstate->snd_sock == PF_INET);
tcp = TCPIPv4BUF;
}
#endif /* CONFIG_NET_IPv4 */
/* The current acknowledgement number number is the (relative) offset
* of the of the next byte needed by the receiver. The snd_isn is the
* offset of the first byte to send to the receiver. The difference
* is the number of bytes to be acknowledged.
*/
pstate->snd_acked = tcp_getsequence(TCPBUF->ackno) - pstate->snd_isn;
nllvdbg("ACK: acked=%d sent=%d flen=%d\n",
pstate->snd_acked, pstate->snd_sent, pstate->snd_flen);
dev->d_sndlen = 0;
flags &= ~TCP_ACKDATA;
}
else if ((flags & TCP_REXMIT) != 0)
{
nlldbg("REXMIT\n");
/* Yes.. in this case, reset the number of bytes that have been sent
* to the number of bytes that have been ACKed.
*/
pstate->snd_sent = pstate->snd_acked;
}
/* Check for a loss of connection */
else if ((flags & (TCP_CLOSE | TCP_ABORT | TCP_TIMEDOUT)) != 0)
{
/* Report not connected */
nlldbg("Lost connection\n");
net_lostconnection(pstate->snd_sock, flags);
pstate->snd_sent = -ENOTCONN;
}
/* Wake up the waiting thread */
sem_post(&pstate->snd_sem);
return flags;
}
/****************************************************************************
* Function: sendfile_addrcheck
*
* Description:
* Check if the destination IP address is in the IPv4 ARP or IPv6 Neighbor
* tables. If not, then the send won't actually make it out... it will be
* replaced with an ARP request (IPv4) or a Neighbor Solicitation (IPv6).
*
* NOTE 1: This could be an expensive check if there are a lot of
* entries in the ARP or Neighbor tables.
*
* NOTE 2: If we are actually harvesting IP addresses on incoming IP
* packets, then this check should not be necessary; the MAC mapping
* should already be in the ARP table in many cases (IPv4 only).
*
* NOTE 3: If CONFIG_NET_ARP_SEND then we can be assured that the IP
* address mapping is already in the ARP table.
*
* Parameters:
* conn - The TCP connection structure
*
* Returned Value:
* None
*
* Assumptions:
* Running at the interrupt level
*
****************************************************************************/
#ifdef CONFIG_NET_ETHERNET
static inline bool sendfile_addrcheck(FAR struct tcp_conn_s *conn)
{
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
if (conn->domain == PF_INET)
#endif
{
#if !defined(CONFIG_NET_ARP_IPIN) && !defined(CONFIG_NET_ARP_SEND)
return (arp_find(conn->u.ipv4.raddr) != NULL);
#else
return true;
#endif
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else
#endif
{
#if !defined(CONFIG_NET_ICMPv6_SEND)
return (neighbor_findentry(conn->u.ipv6.raddr) != NULL);
#else
return true;
#endif
}
#endif /* CONFIG_NET_IPv6 */
}
#else /* CONFIG_NET_ETHERNET */
# sendfile_addrcheck(r) (true)
#endif /* CONFIG_NET_ETHERNET */
/****************************************************************************
* Function: sendfile_interrupt
*
* Description:
* This function is called from the interrupt level to perform the actual
* send operation when polled by the lower, device interfacing layer.
*
* Parameters:
* dev The structure of the network driver that caused the interrupt
* conn The connection structure associated with the socket
* flags Set of events describing why the callback was invoked
*
* Returned Value:
* None
*
* Assumptions:
* Running at the interrupt level
*
****************************************************************************/
static uint16_t sendfile_interrupt(FAR struct net_driver_s *dev, FAR void *pvconn,
FAR void *pvpriv, uint16_t flags)
{
FAR struct tcp_conn_s *conn = (FAR struct tcp_conn_s*)pvconn;
FAR struct sendfile_s *pstate = (FAR struct sendfile_s *)pvpriv;
int ret;
nllvdbg("flags: %04x acked: %d sent: %d\n",
flags, pstate->snd_acked, pstate->snd_sent);
/* Check for a loss of connection */
if ((flags & (TCP_CLOSE | TCP_ABORT | TCP_TIMEDOUT)) != 0)
{
/* Report not connected */
nlldbg("Lost connection\n");
net_lostconnection(pstate->snd_sock, flags);
pstate->snd_sent = -ENOTCONN;
goto end_wait;
}
/* We get here if (1) not all of the data has been ACKed, (2) we have been
* asked to retransmit data, (3) the connection is still healthy, and (4)
* the outgoing packet is available for our use. In this case, we are
* now free to send more data to receiver -- UNLESS the buffer contains
* unprocessing incoming data. In that event, we will have to wait for the
* next polling cycle.
*/
if ((flags & TCP_NEWDATA) == 0 && pstate->snd_sent < pstate->snd_flen)
{
/* Get the amount of data that we can send in the next packet */
uint32_t sndlen = pstate->snd_flen - pstate->snd_sent;
if (sndlen > tcp_mss(conn))
{
sndlen = tcp_mss(conn);
}
/* Check if we have "space" in the window */
if ((pstate->snd_sent - pstate->snd_acked + sndlen) < conn->winsize)
{
uint32_t seqno;
/* Then set-up to send that amount of data. (this won't actually
* happen until the polling cycle completes).
*/
ret = file_seek(pstate->snd_file,
pstate->snd_foffset + pstate->snd_sent, SEEK_SET);
if (ret < 0)
{
int errcode = errno;
nlldbg("failed to lseek: %d\n", errcode);
pstate->snd_sent = -errcode;
goto end_wait;
}
ret = file_read(pstate->snd_file, dev->d_appdata, sndlen);
if (ret < 0)
{
int errcode = errno;
nlldbg("failed to read from input file: %d\n", errcode);
pstate->snd_sent = -errcode;
goto end_wait;
}
dev->d_sndlen = sndlen;
/* Set the sequence number for this packet. NOTE: uIP updates
* sndseq on recept of ACK *before* this function is called. In that
* case sndseq will point to the next unacknowledge byte (which might
* have already been sent). We will overwrite the value of sndseq
* here before the packet is sent.
*/
seqno = pstate->snd_sent + pstate->snd_isn;
nllvdbg("SEND: sndseq %08x->%08x len: %d\n", conn->sndseq, seqno, ret);
tcp_setsequence(conn->sndseq, seqno);
/* Check if the destination IP address is in the ARP or Neighbor
* table. If not, then the send won't actually make it out... it
* will be replaced with an ARP request or Neighbor Solicitation.
*/
if (pstate->snd_sent != 0 || sendfile_addrcheck(conn))
{
/* Update the amount of data sent (but not necessarily ACKed) */
pstate->snd_sent += sndlen;
nllvdbg("pid: %d SEND: acked=%d sent=%d flen=%d\n", getpid(),
pstate->snd_acked, pstate->snd_sent, pstate->snd_flen);
}
}
else
{
nlldbg("Window full, wait for ack\n");
goto wait;
}
}
#ifdef CONFIG_NET_SOCKOPTS
/* All data has been send and we are just waiting for ACK or re-transmit
* indications to complete the send. Check for a timeout.
*/
if (sendfile_timeout(pstate))
{
/* Yes.. report the timeout */
nlldbg("SEND timeout\n");
pstate->snd_sent = -ETIMEDOUT;
goto end_wait;
}
#endif /* CONFIG_NET_SOCKOPTS */
if (pstate->snd_sent >= pstate->snd_flen
&& pstate->snd_acked < pstate->snd_flen)
{
/* All data has been sent, but there are outstanding ACK's */
goto wait;
}
end_wait:
/* Do not allow any further callbacks */
pstate->snd_datacb->flags = 0;
pstate->snd_datacb->priv = NULL;
pstate->snd_datacb->event = NULL;
/* Wake up the waiting thread */
sem_post(&pstate->snd_sem);
wait:
return flags;
}
/****************************************************************************
* Function: sendfile_txnotify
*
* Description:
* Notify the appropriate device driver that we are have data ready to
* be send (TCP)
*
* Parameters:
* psock - Socket state structure
* conn - The TCP connection structure
*
* Returned Value:
* None
*
****************************************************************************/
static inline void sendfile_txnotify(FAR struct socket *psock,
FAR struct tcp_conn_s *conn)
{
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
/* If both IPv4 and IPv6 support are enabled, then we will need to select
* the device driver using the appropriate IP domain.
*/
if (psock->s_domain == PF_INET)
#endif
{
/* Notify the device driver that send data is available */
#ifdef CONFIG_NET_MULTILINK
netdev_ipv4_txnotify(conn->u.ipv4.laddr, conn->u.ipv4.raddr);
#else
netdev_ipv4_txnotify(conn->u.ipv4.raddr);
#endif
}
#endif /* CONFIG_NET_IPv4 */
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
else /* if (psock->s_domain == PF_INET6) */
#endif /* CONFIG_NET_IPv4 */
{
/* Notify the device driver that send data is available */
DEBUGASSERT(psock->s_domain == PF_INET6);
#ifdef CONFIG_NET_MULTILINK
netdev_ipv6_txnotify(conn->u.ipv6.laddr, conn->u.ipv6.raddr);
#else
netdev_ipv6_txnotify(conn->u.ipv6.raddr);
#endif
}
#endif /* CONFIG_NET_IPv6 */
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: net_sendfile
*
* Description:
* The send() call may be used only when the socket is in a connected state
* (so that the intended recipient is known). The only difference between
* send() and write() is the presence of flags. With zero flags parameter,
* send() is equivalent to write(). Also, send(sockfd,buf,len,flags) is
* equivalent to sendto(sockfd,buf,len,flags,NULL,0).
*
* Parameters:
* psock An instance of the internal socket structure.
* buf Data to send
* len Length of data to send
* flags Send flags
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately:
*
* EAGAIN or EWOULDBLOCK
* The socket is marked non-blocking and the requested operation
* would block.
* EBADF
* An invalid descriptor was specified.
* ECONNRESET
* Connection reset by peer.
* EDESTADDRREQ
* The socket is not connection-mode, and no peer address is set.
* EFAULT
* An invalid user space address was specified for a parameter.
* EINTR
* A signal occurred before any data was transmitted.
* EINVAL
* Invalid argument passed.
* EISCONN
* The connection-mode socket was connected already but a recipient
* was specified. (Now either this error is returned, or the recipient
* specification is ignored.)
* EMSGSIZE
* The socket type requires that message be sent atomically, and the
* size of the message to be sent made this impossible.
* ENOBUFS
* The output queue for a network interface was full. This generally
* indicates that the interface has stopped sending, but may be
* caused by transient congestion.
* ENOMEM
* No memory available.
* ENOTCONN
* The socket is not connected, and no target has been given.
* ENOTSOCK
* The argument s is not a socket.
* EOPNOTSUPP
* Some bit in the flags argument is inappropriate for the socket
* type.
* EPIPE
* The local end has been shut down on a connection oriented socket.
* In this case the process will also receive a SIGPIPE unless
* MSG_NOSIGNAL is set.
*
* Assumptions:
*
****************************************************************************/
ssize_t net_sendfile(int outfd, struct file *infile, off_t *offset,
size_t count)
{
FAR struct socket *psock = sockfd_socket(outfd);
FAR struct tcp_conn_s *conn = (FAR struct tcp_conn_s*)psock->s_conn;
struct sendfile_s state;
net_lock_t save;
int err;
/* Verify that the sockfd corresponds to valid, allocated socket */
if (!psock || psock->s_crefs <= 0)
{
ndbg("ERROR: Invalid socket\n");
err = EBADF;
goto errout;
}
/* If this is an un-connected socket, then return ENOTCONN */
if (psock->s_type != SOCK_STREAM || !_SS_ISCONNECTED(psock->s_flags))
{
ndbg("ERROR: Not connected\n");
err = ENOTCONN;
goto errout;
}
/* Make sure that the IP address mapping is in the ARP table */
#ifdef CONFIG_NET_ARP_SEND
ret = arp_send(conn->u.ipv4.raddr);
if (ret < 0)
{
ndbg("ERROR: Not reachable\n");
err = ENETUNREACH;
goto errout;
}
#endif
/* Set the socket state to sending */
psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_SEND);
/* Initialize the state structure. This is done with interrupts
* disabled because we don't want anything to happen until we
* are ready.
*/
save = net_lock();
memset(&state, 0, sizeof(struct sendfile_s));
sem_init(&state. snd_sem, 0, 0); /* Doesn't really fail */
state.snd_sock = psock; /* Socket descriptor to use */
state.snd_foffset = offset ? *offset : 0; /* Input file offset */
state.snd_flen = count; /* Number of bytes to send */
state.snd_file = infile; /* File to read from */
/* Allocate resources to receive a callback */
state.snd_datacb = tcp_callback_alloc(conn);
if (state.snd_datacb == NULL)
{
nlldbg("Failed to allocate data callback\n");
err = ENOMEM;
goto errout_locked;
}
state.snd_ackcb = tcp_callback_alloc(conn);
if (state.snd_ackcb == NULL)
{
nlldbg("Failed to allocate ack callback\n");
err = ENOMEM;
goto errout_datacb;
}
/* Get the initial sequence number that will be used */
state.snd_isn = tcp_getsequence(conn->sndseq);
/* There is no outstanding, unacknowledged data after this
* initial sequence number.
*/
conn->unacked = 0;
#ifdef CONFIG_NET_SOCKOPTS
/* Set the initial time for calculating timeouts */
state.snd_time = clock_systimer();
#endif
/* Set up the ACK callback in the connection */
state.snd_ackcb->flags = (TCP_ACKDATA | TCP_REXMIT | TCP_CLOSE |
TCP_ABORT | TCP_TIMEDOUT);
state.snd_ackcb->priv = (void*)&state;
state.snd_ackcb->event = ack_interrupt;
/* Perform the TCP send operation */
do
{
state.snd_datacb->flags = TCP_POLL;
state.snd_datacb->priv = (void*)&state;
state.snd_datacb->event = sendfile_interrupt;
/* Notify the device driver of the availability of TX data */
sendfile_txnotify(psock, conn);
net_lockedwait(&state.snd_sem);
}
while (state.snd_sent >= 0 && state.snd_acked < state.snd_flen);
/* Set the socket state to idle */
psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_IDLE);
tcp_callback_free(conn, state.snd_ackcb);
errout_datacb:
tcp_callback_free(conn, state.snd_datacb);
errout_locked:
sem_destroy(&state. snd_sem);
net_unlock(save);
errout:
if (err)
{
set_errno(err);
return ERROR;
}
else if (state.snd_sent < 0)
{
set_errno(-state.snd_sent);
return ERROR;
}
else
{
return state.snd_sent;
}
}
#endif /* CONFIG_NET && CONFIG_NET_TCP */
Reference in New Issue View Git Blame Copy Permalink