107 lines
3.8 KiB
Plaintext
107 lines
3.8 KiB
Plaintext
README
|
|
======
|
|
|
|
This directory contains the port to the NXP LPCXpress-LPC54628 board
|
|
(OMI1309UL). This board features:
|
|
|
|
- LPC54628 Cortex-M4 microcontroller running at up to 220MHz
|
|
- 272x480 color LCD with capacitive touch screen
|
|
- On-board, high-speed USB, Link2 debug probe with CMSIS-DAP and SEGGER
|
|
J-Link protocol options
|
|
- UART and SPI port bridging from LPC546xx target to USB via the on-
|
|
board debug probe
|
|
- Support for external debug probe
|
|
- 3 x user LEDs, plus Reset, ISP (3) and user buttons
|
|
- Multiple Expansion options, including Arduino UNO and PMod
|
|
- Built-in power consumption measurement for target LPC546xx MCU
|
|
- 128Mb Micron MT25QL128 Quad-SPI flash
|
|
- 16MB Micron MT48LC8M16A2B4 SDRAM
|
|
- Knowles SPH0641LM4H digital microphone
|
|
- Full size SD/MMC card slot
|
|
- NXP MMA8652FCR1 accelerometer
|
|
- Stereo audio codec with line in/out
|
|
- High and full speed USB ports with micro A/B connector for host or
|
|
device functionality
|
|
- 10/100Mbps Ethernet (RJ45 connector)
|
|
|
|
STATUS
|
|
======
|
|
|
|
2017-12-10: The basic NSH configuration is functional at 220MHz with a
|
|
Serial console, timer and LED support.
|
|
|
|
Configurations
|
|
==============
|
|
|
|
Information Common to All Configurations
|
|
----------------------------------------
|
|
Each LPCXpresso-LPC54628 configuration is maintained in a sub-directory
|
|
and can be selected as follow:
|
|
|
|
.tools/configure.sh [OPTIONS] xmc5400-relax/<subdir>
|
|
|
|
See '.tools/configure.sh -h' for a list of all options. The most typical
|
|
are -l to select the Linux host or -c to select the Windows Cygwin host.
|
|
|
|
Before starting the build, make sure that your PATH environment variable
|
|
includes the correct path to your toolchain.
|
|
|
|
And then build NuttX by simply typing the following. At the conclusion of
|
|
the make, the nuttx binary will reside in an ELF file called, simply, nuttx.
|
|
|
|
make
|
|
|
|
The <subdir> that is provided above as an argument to the tools/configure.sh
|
|
must be is one of the following.
|
|
|
|
NOTES:
|
|
|
|
1. These configurations use the mconf-based configuration tool. To
|
|
change any of these configurations using that tool, you should:
|
|
|
|
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
|
see additional README.txt files in the NuttX tools repository.
|
|
|
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
|
reconfiguration process.
|
|
|
|
2. Unless stated otherwise, all configurations generate console
|
|
output on USART0 (aka Flexcomm0). USART0 connects to the serial
|
|
bridge on LPC4322JET100 and should be available as a USB serial
|
|
device on your host PC.
|
|
|
|
3. All of these configurations are set up to build under Windows using
|
|
the "GNU Tools for ARM Embedded Processors" that is maintained by
|
|
ARM (unless stated otherwise in the description of the configuration).
|
|
|
|
https://developer.arm.com/open-source/gnu-toolchain/gnu-rm
|
|
|
|
That toolchain selection can easily be reconfigured using
|
|
'make menuconfig'. Here are the relevant current settings:
|
|
|
|
Build Setup:
|
|
CONFIG_HOST_WINDOWS=y : Window environment
|
|
CONFIG_WINDOWS_CYGWIN=y : Cywin under Windows
|
|
|
|
System Type -> Toolchain:
|
|
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : GNU ARM EABI toolchain
|
|
|
|
Configuration sub-directories
|
|
-----------------------------
|
|
|
|
nsh:
|
|
|
|
Configures the NuttShell (nsh) located at examples/nsh. This
|
|
configuration is focused on low level, command-line driver testing. It
|
|
has no network.
|
|
|
|
NOTES:
|
|
|
|
1. NSH built-in applications are supported.
|
|
|
|
Binary Formats:
|
|
CONFIG_BUILTIN=y : Enable support for built-in programs
|
|
|
|
Application Configuration:
|
|
CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line
|