130 lines
5.6 KiB
C
130 lines
5.6 KiB
C
/****************************************************************************
|
||
* drivers/wireless/ISM1_868MHzGFSK100kbps.c
|
||
*
|
||
* Copyright (C) 2011 Uros Platise. All rights reserved.
|
||
* Copyright (C) 2011 Ales Verbic. All rights reserved.
|
||
*
|
||
* Authors: Uros Platise <uros.platise@isotel.eu>
|
||
* Ales Verbic <ales.verbic@isotel.eu>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/wireless/cc1101.h>
|
||
|
||
/****************************************************************************
|
||
* Public Data
|
||
****************************************************************************/
|
||
|
||
/** Settings for 868 MHz, GFSK at 100kbps
|
||
*
|
||
* ISM Region 1 (Europe) only, Band 868–870 MHz
|
||
*
|
||
* Frequency ERP Duty Cycle Bandwidth Remarks
|
||
* 868 – 868.6 MHz +14 dBm < 1% No limits
|
||
* 868.7 – 869.2 MHz +14 dBm < 0.1% No limits
|
||
* 869.3 – 869.4 MHz +10 dBm No limits < 25 kHz Appropriate access
|
||
* protocol required
|
||
* 869.4 – 869.65 MHz +27 dBm < 10% < 25 kHz Channels may be
|
||
* combined to one
|
||
* high speed channel
|
||
* 869.7 -870 MHz +7 dBm No limits No limits
|
||
*
|
||
* Deviation = 46.142578
|
||
* Base frequency = 867.999985
|
||
* Carrier frequency = 867.999985
|
||
* Channel number = 0
|
||
* Carrier frequency = 867.999985
|
||
* Modulated = true
|
||
* Modulation format = GFSK
|
||
* Manchester enable = false
|
||
* Sync word qualifier mode = 30/32 sync word bits detected
|
||
* Preamble count = 4
|
||
* Channel spacing = 199.813843
|
||
* Carrier frequency = 867.999985
|
||
* Data rate = 99.9069
|
||
* RX filter BW = 210.937500
|
||
* Data format = Normal mode
|
||
* Length config = Fixed packet length mode. Length configured in PKTLEN register
|
||
* CRC enable = true
|
||
* Packet length = 62
|
||
* Device address = 00
|
||
* Address config = NO Address check, no broadcast
|
||
* CRC autoflush = true
|
||
* PA ramping = false
|
||
* TX power = 0
|
||
*/
|
||
|
||
const struct c1101_rfsettings_s cc1101_rfsettings_ISM1_868MHzGFSK100kbps =
|
||
{
|
||
.FSCTRL1 = 0x08, /* FSCTRL1 Frequency Synthesizer Control */
|
||
.FSCTRL0 = 0x00, /* FSCTRL0 Frequency Synthesizer Control */
|
||
|
||
.FREQ2 = 0x20, /* FREQ2 Frequency Control Word, High Byte */
|
||
.FREQ1 = 0x25, /* FREQ1 Frequency Control Word, Middle Byte */
|
||
.FREQ0 = 0xed, /* FREQ0 Frequency Control Word, Low Byte */
|
||
|
||
.MDMCFG4 = 0x8b, /* MDMCFG4 Modem Configuration */
|
||
.MDMCFG3 = 0xe5, /* MDMCFG3 Modem Configuration */
|
||
.MDMCFG2 = 0x13, /* MDMCFG2 Modem Configuration */
|
||
.MDMCFG1 = 0x22, /* MDMCFG1 Modem Configuration */
|
||
.MDMCFG0 = 0xe5, /* MDMCFG0 Modem Configuration */
|
||
|
||
.DEVIATN = 0x46, /* DEVIATN Modem Deviation Setting */
|
||
|
||
.FOCCFG = 0x1d, /* FOCCFG Frequency Offset Compensation Configuration */
|
||
|
||
.BSCFG = 0x1c, /* BSCFG Bit Synchronization Configuration */
|
||
|
||
.AGCCTRL2 = 0xc7, /* AGCCTRL2 AGC Control */
|
||
.AGCCTRL1 = 0x00, /* AGCCTRL1 AGC Control */
|
||
.AGCCTRL0 = 0xb2, /* AGCCTRL0 AGC Control */
|
||
|
||
.FREND1 = 0xb6, /* FREND1 Front End RX Configuration */
|
||
.FREND0 = 0x10, /* FREND0 Front End TX Configuration */
|
||
|
||
.FSCAL3 = 0xea, /* FSCAL3 Frequency Synthesizer Calibration */
|
||
.FSCAL2 = 0x2a, /* FSCAL2 Frequency Synthesizer Calibration */
|
||
.FSCAL1 = 0x00, /* FSCAL1 Frequency Synthesizer Calibration */
|
||
.FSCAL0 = 0x1f, /* FSCAL0 Frequency Synthesizer Calibration */
|
||
|
||
.CHMIN = 0, /* Fix at 9th channel: 869.80 MHz +- 100 kHz RF Bandwidth */
|
||
.CHMAX = 9, /* single channel */
|
||
|
||
.PAMAX = 8, /* 0 means power OFF, 8 represents PA[7] */
|
||
.PA =
|
||
{
|
||
0x03, 0x0f, 0x1e, 0x27, 0x67, 0x50, 0x81, 0xc2
|
||
}
|
||
};
|