nuttx/boards/arm/cxd56xx/common/src/cxd56_spisd.c
Nathan Hartman dd718e78f7 Fix typos
2022-08-07 23:33:19 +08:00

131 lines
3.8 KiB
C

/****************************************************************************
* boards/arm/cxd56xx/common/src/cxd56_spisd.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/mmcsd.h>
#include <nuttx/board.h>
#include <nuttx/fs/fs.h>
#include "cxd56_spi.h"
#include "cxd56_gpio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_CXD56_SPISD_SLOT_NO
# define CONFIG_CXD56_SPISD_SLOT_NO 0
#endif
/* Please configure the pin assignment for your board */
#ifndef MMCSD_DETECT
# define MMCSD_DETECT PIN_I2S0_DATA_OUT
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_spisd_initialize
*
* Description:
* Initialize the SPI-based SD card.
*
****************************************************************************/
int board_spisd_initialize(int minor, int bus)
{
int ret;
struct spi_dev_s *spi;
/* Enable input of detect pin */
cxd56_gpio_config(MMCSD_DETECT, true);
/* Initialize spi device */
spi = cxd56_spibus_initialize(bus);
if (!spi)
{
ferr("ERROR: Failed to initialize spi%d.\n", bus);
return -ENODEV;
}
/* Get the SPI driver instance for the SD chip select */
finfo("Initializing SPI for the MMC/SD slot\n");
ret = mmcsd_spislotinitialize(minor, CONFIG_CXD56_SPISD_SLOT_NO, spi);
if (ret < 0)
{
ferr("ERROR: Failed to bind SPI device to MMC/SD slot %d: %d\n",
CONFIG_CXD56_SPISD_SLOT_NO, ret);
return ret;
}
/* Mount filesystem */
ret = nx_mount("/dev/mmcsd0", "/mnt/sd0", "vfat", 0, NULL);
if (ret < 0)
{
_err("ERROR: Failed to mount the SDCARD. %d\n", ret);
}
return OK;
}
/****************************************************************************
* Name: board_spisd_status
*
* Description:
* Get the status whether SD Card is present or not.
* This function is called only from cxd56_spi.c.
*
* Returned Value:
* Return SPI_STATUS_PRESENT if SD Card is present. Otherwise, return 0.
*
****************************************************************************/
uint8_t board_spisd_status(struct spi_dev_s *dev, uint32_t devid)
{
uint8_t ret = 0;
if (devid == SPIDEV_MMCSD(0))
{
/* MMCSD_DETECT is mapping to SD Card detect pin
* MMCSD_DETECT = 0: Inserted
* MMCSD_DETECT = 1: Removed
*/
ret = cxd56_gpio_read(MMCSD_DETECT) ? 0 : SPI_STATUS_PRESENT;
}
return ret;
}