nuttx

chip

Fix a copy and paste error concerning the CAN driver. In the file sam_matrix.h the define SAM_MATRIX_CAN0_OFFSET is set to the wrong value.

2016-05-06 04:02:28 -06:00

chip.h

SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer

2015-03-28 13:09:01 -06:00

Kconfig

Centralize definitions associated with CONFIG_DEBUG_CAN

2016-06-15 15:45:27 -06:00

Make.defs

Add the up_systemreset interface to the samv7 arch. The approach is slightly different in that: 1) It enables ARCH_HAVE_RESET and allows the user to set if, and for how long, to drive External nRST signal. It also does not contain a default board_reset, as that really should be done in the config's src if CONFIG_BOARDCTL_RESET is defined.

2016-05-23 17:05:02 -06:00

sam_allocateheap.c

Rename board_led_on to board_autoled_on

2015-11-01 09:07:06 -06:00

sam_clockconfig.c

SAMV71 and SAME70: Place the Main Oscillator Enable in the board.h

2016-03-04 12:31:54 -06:00

sam_clockconfig.h

SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled

2015-08-11 15:48:26 -06:00

sam_config.h

Remove CONFIG_USARTn_ISUART

2016-05-25 11:21:48 -06:00

sam_emac.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_ethernet.c

Rename *lldbg to *llerr

2016-06-11 14:55:27 -06:00

sam_ethernet.h

SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts

2015-03-18 17:23:40 -06:00

sam_freerun.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_freerun.h

SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized

2016-02-05 10:22:11 -06:00

sam_gpio.c

Centralize definitions associated with CONFIG_DEBUG_GPIO

2016-06-15 09:20:23 -06:00

sam_gpio.h

Centralize definitions associated with CONFIG_DEBUG_GPIO

2016-06-15 09:20:23 -06:00

sam_gpioirq.c

Correct some spacing issues

2015-10-07 11:39:06 -06:00

sam_hsmci_clkdiv.c

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

sam_hsmci.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_hsmci.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_irq.c

Centralize definitions associated with CONFIG_DEBUG_IRQ

2016-06-15 08:35:22 -06:00

sam_lowputc.c

Backing out part of last commit

2016-05-19 15:46:07 -06:00

sam_lowputc.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_mcan.c

Centralize definitions associated with CONFIG_DEBUG_CAN

2016-06-15 15:45:27 -06:00

sam_mcan.h

Standardize the width of all comment boxes in header files

2015-10-02 17:47:23 -06:00

sam_mpuinit.c

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

sam_mpuinit.h

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

sam_oneshot.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_oneshot.h

Cosmetic fix to spacing

2016-05-29 08:25:05 -06:00

sam_pck.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_pck.h

SAMV7: Extend programmable clock support for queries about the PCK configuration

2015-12-03 14:11:39 -06:00

sam_periphclks.h

arch/arm/src/samv7: Add SAME70 memory map

2015-11-14 12:01:28 -06:00

sam_progmem.c

arch/arm/src/samv7: Add SAME70 memory map

2015-11-14 12:01:28 -06:00

sam_progmem.h

SAMV7 flash logic is complete, uncompiled, and untested

2015-11-12 10:46:59 -06:00

sam_qspi.c

qspierr/info should be spierr/info

2016-06-15 14:30:54 -06:00

sam_qspi.h

SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different

2015-08-25 15:23:59 -06:00

sam_rswdt.c

Centralize definitions associated with CONFIG_DEBUG_WATCHDOG

2016-06-16 06:28:04 -06:00

sam_serial.c

Remove CONFIG_USARTn_ISUART

2016-05-25 11:21:48 -06:00

sam_spi_slave.c

Centralize definitions associated with CONFIG_DEBUG_SPI

2016-06-15 10:41:13 -06:00

sam_spi.c

Centralize definitions associated with CONFIG_DEBUG_SPI

2016-06-15 10:41:13 -06:00

sam_spi.h

SAMV7 SPI: Revise support for Peripheral Chip Select Decoding to address up to 15 slaved

2016-02-25 08:13:33 -06:00

sam_ssc.c

Centralize definitions associated with CONFIG_DEBUG_I2S

2016-06-15 16:54:01 -06:00

sam_ssc.h

SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.

2015-03-12 16:00:38 -06:00

sam_start.c

Fix build if the config is not updated

2016-05-19 12:44:58 -10:00

sam_start.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_systemreset.c

Restore PR. I have no idea where it went.

2016-05-23 17:45:15 -06:00

sam_tc.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_tc.h

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_tickless.c

Rename *lldbg to *llerr

2016-06-11 14:55:27 -06:00

sam_timerisr.c

Costmetic fixes to C coding style

2015-10-05 17:13:53 -06:00

sam_trng.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_trng.h

SAMV7: Port SAMAD5 TRNG driver to the SAMV7

2015-12-06 08:53:31 -06:00

sam_twihs.c

Centralize definitions associated with CONFIG_DEBUG_I2C

2016-06-15 16:30:12 -06:00

sam_twihs.h

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:08:23 -06:00

sam_usbdev.h

SAMV7: A little more USB-related stuff

2015-03-21 08:54:01 -06:00

sam_usbdevhs.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

sam_userspace.c

SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized

2015-11-07 09:35:23 -06:00

sam_userspace.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_wdt.c

Centralize definitions associated with CONFIG_DEBUG_WATCHDOG

2016-06-16 06:28:04 -06:00

sam_wdt.h

SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface.

2016-05-18 19:47:48 -06:00

sam_xdmac.c

Fix some warnings

2016-06-13 11:48:20 -06:00

sam_xdmac.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

same70_periphclks.h

arch/arm/src/samv7: Add SAME70 memory map

2015-11-14 12:01:28 -06:00

samv71_periphclks.h

arch/arm/src/samv7: Add support for SAME70 peripheral clocks

2015-11-14 11:41:53 -06:00