nuttx/configs/olimex-stm32-p207
2014-10-11 17:03:44 -06:00
..
include
nsh Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming 2014-10-11 17:03:44 -06:00
scripts
src All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 14:28:55 -06:00
Kconfig
README.txt More trailing whilespace removal 2014-04-13 16:22:22 -06:00

README
======

The NuttX configuration for the Olimex STM32-P207 is assembled mainly
from the configurations stm32f4discovery and stm3240g-eval.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

The following peripherals are enabled in this configuration.
 - LEDs:       show the sytem status

 - Buttons:    TAMPER-button, WKUP-button, J1-Joystick (consists of RIGHT-,
               UP-, LEFT-, DOWN-, and CENTER-button). Built in app
               'buttons' works.

 - ADC:        ADC1 samples the red trim potentiometer AN_TR
               Built in app 'adc' works.

 - USB-FS-OTG: enabled but not really tested, since there is only a
               USB-A-connector (host) connected to the full speed µC inputs.
               The other connector (device) is connected to the high speed µC
               inputs, but it seems that NuttX has currently no driver
               for it.

 - CAN:        Built in app 'can' works, but appart from that not really tested.

 - Ethernet:   Ping to other station on the network works.