nuttx/configs/ekk-lm3s9b96/src/up_leds.c
patacongo 0e7c2d25c2 Eliminate arch/arc/src/lm3s/lm3s_internal.h; replace with several header files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5494 42af7a65-404d-4744-a932-0658087f49c3
2013-01-08 19:27:38 +00:00

169 lines
5.2 KiB
C

/****************************************************************************
* configs/lm3s6965-ek/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Jose Pablo Rojas V. <jrojas@nx-engineering.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "lm_gpio.h"
#include "ekklm3s9b96_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* Dump GPIO registers */
#ifdef LED_DEBUG
# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m)
#else
# define led_dumpgpio(m)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
static uint8_t g_nest;
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
leddbg("Initializing\n");
/* Configure Port D, Bit 0 as an output, initial value=OFF */
led_dumpgpio("up_ledinit before lm3s_configgpio()");
lm3s_configgpio(LED_GPIO);
led_dumpgpio("up_ledinit after lm3s_configgpio()");
g_nest = 0;
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
switch (led)
{
case LED_STARTED:
case LED_HEAPALLOCATE:
default:
break;
case LED_INIRQ:
case LED_SIGNAL:
case LED_ASSERTION:
case LED_PANIC:
g_nest++;
case LED_IRQSENABLED:
case LED_STACKCREATED:
led_dumpgpio("up_ledon: before lm3s_gpiowrite()");
lm3s_gpiowrite(LED_GPIO, false);
led_dumpgpio("up_ledon: after lm3s_gpiowrite()");
break;
}
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
switch (led)
{
case LED_IRQSENABLED:
case LED_STACKCREATED:
case LED_STARTED:
case LED_HEAPALLOCATE:
default:
break;
case LED_INIRQ:
case LED_SIGNAL:
case LED_ASSERTION:
case LED_PANIC:
if (--g_nest <= 0)
{
led_dumpgpio("up_ledoff: before lm3s_gpiowrite()");
lm3s_gpiowrite(LED_GPIO, true);
led_dumpgpio("up_ledoff: after lm3s_gpiowrite()");
}
break;
}
}
#endif /* CONFIG_ARCH_LEDS */