| .. |
|
analog
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
audio
|
WM8904 interface enable method now returns the previous interrupt state
|
2014-08-04 14:52:59 -06:00 |
|
binfmt
|
Clean-up up some warning
|
2014-07-11 11:58:46 -06:00 |
|
crypto
|
Move crypto header files from include/crypto to include/nuttx/crypto
|
2014-07-03 18:35:08 -06:00 |
|
fs
|
The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard
|
2014-07-29 16:36:15 -06:00 |
|
input
|
WM8904: Add header file support for this forcoming driver
|
2014-07-18 13:28:51 -06:00 |
|
lcd
|
SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)
|
2014-05-13 10:38:46 -06:00 |
|
mtd
|
mtd.h needs forward reference to struct spi_dev_s
|
2014-05-25 07:39:15 -06:00 |
|
net
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
nx
|
Costmetic: Update TODO list, README files, refreshed configuration, updated comments
|
2014-07-30 14:26:50 -06:00 |
|
power
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sensors
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
sercomm
|
Move include/sercomm to include/nuttx/sercomm
|
2012-03-24 18:33:21 +00:00 |
|
serial
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:00:33 -06:00 |
|
spi
|
Nucleo: Remove bogus MPU definitions
|
2014-04-25 08:52:50 -06:00 |
|
syslog
|
Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE
|
2014-07-01 12:00:40 -06:00 |
|
usb
|
Cosmetic changes
|
2014-05-28 14:09:58 -06:00 |
|
video
|
Fix typo RBG -> RGB in several macros
|
2014-05-12 13:00:48 -06:00 |
|
wireless
|
Cosmetic changes, mostly to comments
|
2014-07-29 12:49:40 -06:00 |
|
.gitignore
|
Mostly updates and corrections to .gitignore files
|
2013-04-04 15:39:50 -06:00 |
|
arch.h
|
Some final tickless OS bugfixes. No longer EXPERIMENTAL. Update some comments
|
2014-08-07 19:11:22 -06:00 |
|
ascii.h
|
Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao
|
2013-07-09 07:59:28 -06:00 |
|
can.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
clock.h
|
WM8904: Don't use MSEC2TICK in timeout calculation
|
2014-08-08 11:02:45 -06:00 |
|
compiler.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
configdata.h
|
Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit
|
2013-11-01 07:39:20 -06:00 |
|
float.h
|
lib/math files not follow coding standard; float, double, and long double versions in separate files to reduce size of dumb link
|
2012-10-28 18:42:09 +00:00 |
|
gran.h
|
Resync new repository with old repo r5166
|
2012-09-17 18:35:37 +00:00 |
|
i2c.h
|
maXTouch: Check for successful memory allocation was backward
|
2014-07-07 09:55:39 -06:00 |
|
init.h
|
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
|
2013-11-01 11:16:51 -06:00 |
|
irq.h
|
Add support for ram vectors to the ARMv7-M architecture
|
2013-03-18 21:10:08 +00:00 |
|
kmalloc.h
|
/proc task directories can now have sub-directories
|
2013-12-15 10:31:07 -06:00 |
|
kthread.h
|
NX server needs to be on a kernel thread for the kernel build
|
2013-12-30 17:55:19 -06:00 |
|
lib.h
|
Move stream data from TCB to task group structure.
|
2013-01-26 22:25:21 +00:00 |
|
math.h
|
Change double_t to double in rint. Add rintf and rintl while we are at it
|
2014-06-28 10:14:29 -06:00 |
|
mm.h
|
With these fixes, the kernel build is basically functional (but there is more to be done)
|
2013-03-09 01:27:42 +00:00 |
|
mmcsd.h
|
Created new directories to hold SPI-related files
|
2013-07-01 08:11:54 -06:00 |
|
mqueue.h
|
Use uint16_t vs uint8_t in the message queue structure if the max message size is > 128
|
2014-02-18 14:14:51 -06:00 |
|
page.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
poff.h
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
progmem.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
pthread.h
|
Header file clean-up
|
2012-07-17 03:58:11 +00:00 |
|
pwm.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
regex.h
|
Header file clean-up
|
2012-07-17 03:58:11 +00:00 |
|
rtc.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
rwbuffer.h
|
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
|
2014-07-11 16:19:17 -06:00 |
|
sched.h
|
Make sure that the Z16F build still builds and runs
|
2014-01-01 10:29:44 -06:00 |
|
scsi.h
|
Header file clean-up
|
2012-07-17 03:58:11 +00:00 |
|
sdio.h
|
Nucleo F401RE: Remove PX4 cruft that can in with the port
|
2014-04-22 12:18:08 -06:00 |
|
spawn.h
|
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
|
2013-01-18 01:52:42 +00:00 |
|
stdarg.h
|
Add a generic GCC stdarg.h header file
|
2012-07-08 14:50:43 +00:00 |
|
streams.h
|
Add seekable standard streams
|
2014-06-14 16:19:42 -06:00 |
|
time.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
timer.h
|
Timer driver updates from Bob Doiron
|
2014-05-05 14:40:19 -06:00 |
|
tree.h
|
Fix error in tree.h
|
2014-06-02 13:44:44 -06:00 |
|
userspace.h
|
Add kernel/user memalign functions. Not fully integrated
|
2013-08-20 13:04:49 -06:00 |
|
vt100.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
watchdog.h
|
SAM3/4: Add watchdog timer support. From Bob Doisin
|
2014-04-21 19:12:02 -06:00 |
|
wqueue.h
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
