sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6e3cb04531
nuttx/tools/ci/docker/linux/Dockerfile
Peter Bee e1561f8512 tools/ci/docker/linux/Dockerfile: add libv4l-dev 
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-14 12:17:37 +08:00

383 lines
17 KiB
Docker
Raw Blame History

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
FROM ubuntu:20.04 AS builder-base
# NOTE WE ARE NOT REMOVEING APT CACHE.
# This should only be used for temp build images that artifacts will be copied from
RUN apt-get update -qq && apt-get install -y -qq \
curl \
patch \
xz-utils
###############################################################################
# Base image that should be used to prepare tools from nuttx-tools
###############################################################################
FROM builder-base AS nuttx-tools
RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq \
bison \
cmake \
flex \
g++ \
gawk \
git \
gperf \
libncurses5-dev \
make
RUN mkdir /tools
WORKDIR /tools
RUN mkdir -p /tools/nuttx-tools
RUN curl -s -L https://bitbucket.org/nuttx/tools/get/9ad3e1ee75c7.tar.gz \
| tar -C nuttx-tools --strip-components=1 -xz
RUN mkdir bloaty -p \
&& git clone --depth 1 --branch v1.1 https://github.com/google/bloaty bloaty \
&& cd bloaty \
&& cmake -DCMAKE_SYSTEM_PREFIX_PATH=/tools/bloaty \
&& make install
RUN cd nuttx-tools \
&& mkdir genromfs \
&& tar -C genromfs --strip-components=1 -xf genromfs-0.5.2.tar.gz \
&& cd genromfs \
&& make install PREFIX=/tools/genromfs
RUN cd nuttx-tools/kconfig-frontends \
&& ./configure --enable-mconf --disable-gconf --disable-qconf --enable-static --prefix=/tools/kconfig-frontends \
&& make install
# Install Rust and targets supported from NuttX
ENV RUST_HOME=/tools/rust
ENV CARGO_HOME=$RUST_HOME/cargo
ENV RUSTUP_HOME=$RUST_HOME/rustup
RUN mkdir -p $CARGO_HOME \
&& curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y \
&& $CARGO_HOME/bin/rustup target add thumbv6m-none-eabi \
&& $CARGO_HOME/bin/rustup target add thumbv7m-none-eabi
CMD [ "/bin/bash" ]
###############################################################################
# Base image that should be used to prepare arch build images
###############################################################################
FROM builder-base AS nuttx-toolchain-base
RUN mkdir /tools
WORKDIR /tools
###############################################################################
# Build image for tool required by ARM builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-arm
# Download the latest ARM clang toolchain prebuilt by ARM
RUN mkdir clang-arm-none-eabi && \
curl -s -L "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-14.0.0/LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz" \
| tar -C clang-arm-none-eabi --strip-components 1 -xz
# Download the latest ARM GCC toolchain prebuilt by ARM
RUN mkdir gcc-arm-none-eabi && \
curl -s -L "https://developer.arm.com/-/media/Files/downloads/gnu/11.3.rel1/binrel/arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-eabi.tar.xz" \
| tar -C gcc-arm-none-eabi --strip-components 1 -xJ \
&& curl -s -L -O "https://raw.githubusercontent.com/apache/nuttx/master/tools/ci/patch/arm-none-eabi-workaround-for-newlib-version-break.patch" \
&& patch -p0 < arm-none-eabi-workaround-for-newlib-version-break.patch
###############################################################################
# Build image for tool required by ARM64 builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-arm64
# Download the latest ARM64 GCC toolchain prebuilt by ARM
RUN mkdir gcc-aarch64-none-elf && \
curl -s -L "https://developer.arm.com/-/media/Files/downloads/gnu/11.2-2022.02/binrel/gcc-arm-11.2-2022.02-x86_64-aarch64-none-elf.tar.xz" \
| tar -C gcc-aarch64-none-elf --strip-components 1 -xJ
###############################################################################
# Build image for tool required by Pinguino builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-pinguino
# Download the pinguino compilers. Note this includes both 8bit and 32bit
# toolchains and builds for multiple host systems. Only copy what is needed.
RUN mkdir pinguino-compilers && \
curl -s -L "https://github.com/PinguinoIDE/pinguino-compilers/archive/62db5158d7f6d41c6fadb05de81cc31dd81a1958.tar.gz" \
| tar -C pinguino-compilers --strip-components=2 --wildcards -xz */linux64
###############################################################################
# Build image for tool required by Renesas builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-renesas
# Build Renesas RX GCC toolchain
RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq \
bison \
flex \
g++ \
gcc \
libncurses5-dev \
m4 \
make \
texinfo \
wget
# Download toolchain source code
RUN mkdir -p /tools/renesas-tools/source/binutils && \
curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/binutils/4.8.4.201803-gnurx/rx_binutils2.24_2018Q3.tar.gz" \
| tar -C renesas-tools/source/binutils --strip-components=1 -xz
RUN mkdir -p /tools/renesas-tools/source/gcc && \
curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/gcc/4.8.4.201803-gnurx/rx_gcc_4.8.4_2018Q3.tar.gz" \
| tar -C renesas-tools/source/gcc --strip-components=1 -xz
RUN mkdir -p /tools/renesas-tools/source/newlib && \
curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/newlib/4.8.4.201803-gnurx/rx_newlib2.2.0_2018Q3.tar.gz" \
| tar -C renesas-tools/source/newlib --strip-components=1 -xz
# Install binutils
RUN cd renesas-tools/source/binutils && \
chmod +x ./configure ./mkinstalldirs && \
mkdir -p /tools/renesas-tools/build/binutils && cd /tools/renesas-tools/build/binutils && \
/tools/renesas-tools/source/binutils/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc --disable-werror &&\
make && make install
ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH"
# Install gcc
RUN cd renesas-tools/source/gcc && \
chmod +x ./contrib/download_prerequisites ./configure ./move-if-change ./libgcc/mkheader.sh && \
./contrib/download_prerequisites && \
sed -i '1s/^/@documentencoding ISO-8859-1\n/' ./gcc/doc/gcc.texi && \
sed -i 's/@tex/\n&/g' ./gcc/doc/gcc.texi && sed -i 's/@end tex/\n&/g' ./gcc/doc/gcc.texi && \
mkdir -p /tools/renesas-tools/build/gcc && cd /tools/renesas-tools/build/gcc && \
/tools/renesas-tools/source/gcc/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc \
--disable-shared --disable-multilib --disable-libssp --disable-libstdcxx-pch --disable-werror --enable-lto \
--enable-gold --with-pkgversion=GCC_Build_1.02 --with-newlib --enable-languages=c && \
make && make install
ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH"
# Install newlib
RUN cd renesas-tools/source/newlib && \
chmod +x ./configure && \
mkdir -p /tools/renesas-tools/build/newlib && cd /tools/renesas-tools/build/newlib && \
/tools/renesas-tools/source/newlib/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc && \
make && make install
RUN cd /tools/renesas-tools/build/gcc && \
make && make install
###############################################################################
# Build image for tool required by RISCV builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-riscv
# Download the latest RISCV GCC toolchain prebuilt by SiFive
RUN mkdir riscv64-unknown-elf-gcc && \
curl -s -L "https://static.dev.sifive.com/dev-tools/freedom-tools/v2020.12/riscv64-unknown-elf-toolchain-10.2.0-2020.12.8-x86_64-linux-ubuntu14.tar.gz" \
| tar -C riscv64-unknown-elf-gcc --strip-components 1 -xz
###############################################################################
# Build image for tool required by SPARC builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-sparc
# Download the SPARC GCC toolchain prebuilt by Gaisler
RUN mkdir sparc-gaisler-elf-gcc && \
curl -s -L "https://www.gaisler.com/anonftp/bcc2/bin/bcc-2.1.0-gcc-linux64.tar.xz" \
| tar -C sparc-gaisler-elf-gcc --strip-components 1 -xJ
###############################################################################
# Build image for tool required by ESP32 builds
###############################################################################
FROM nuttx-toolchain-base AS nuttx-toolchain-esp32
# Download the latest ESP32 GCC toolchain prebuilt by Espressif
RUN mkdir -p xtensa-esp32-elf-gcc && \
curl -s -L "https://github.com/espressif/crosstool-NG/releases/download/esp-2021r1/xtensa-esp32-elf-gcc8_4_0-esp-2021r1-linux-amd64.tar.gz" \
| tar -C xtensa-esp32-elf-gcc --strip-components 1 -xz
RUN mkdir -p xtensa-esp32s2-elf-gcc && \
curl -s -L "https://github.com/espressif/crosstool-NG/releases/download/esp-2021r1/xtensa-esp32s2-elf-gcc8_4_0-esp-2021r1-linux-amd64.tar.gz" \
| tar -C xtensa-esp32s2-elf-gcc --strip-components 1 -xz
RUN mkdir -p xtensa-esp32s3-elf-gcc && \
curl -s -L "https://github.com/espressif/crosstool-NG/releases/download/esp-2021r1/xtensa-esp32s3-elf-gcc8_4_0-esp-2021r1-linux-amd64.tar.gz" \
| tar -C xtensa-esp32s3-elf-gcc --strip-components 1 -xz
RUN echo "ESP Binaries: 2022/01/26"
RUN mkdir -p /tools/blobs && cd /tools/blobs \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32.bin" -o bootloader-esp32.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32c3.bin" -o bootloader-esp32c3.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32s2.bin" -o bootloader-esp32s2.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32s3.bin" -o bootloader-esp32s3.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32.bin" -o partition-table-esp32.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32c3.bin" -o partition-table-esp32c3.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32s2.bin" -o partition-table-esp32s2.bin \
&& curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32s3.bin" -o partition-table-esp32s3.bin
###############################################################################
# Final Docker image used for running CI system. This includes all toolchains
# supported by the CI system.
###############################################################################
FROM ubuntu:20.04
LABEL maintainer="dev@nuttx.apache.org"
RUN dpkg --add-architecture i386
# This is used for the final images so make sure to not store apt cache
# Note: xtensa-esp32-elf-gdb is linked to libpython2.7
RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq --no-install-recommends \
-o APT::Immediate-Configure=0 \
avr-libc \
build-essential \
ccache \
clang \
clang-tidy \
cmake \
curl \
gcc \
gcc-avr \
gcc-multilib \
gettext \
git \
lib32z1-dev \
libasound2-dev libasound2-dev:i386 \
libc6-dev-i386 \
libcurl4-openssl-dev \
libmad0-dev:i386 \
libncurses5-dev \
libpulse-dev libpulse-dev:i386 \
libpython2.7 \
libtinfo5 \
libv4l-dev libv4l-dev:i386 \
libx11-dev libx11-dev:i386 \
libxext-dev libxext-dev:i386 \
linux-headers-generic \
linux-libc-dev:i386 \
ninja-build \
qemu-system-arm \
qemu-system-misc \
python3 \
python3-pip \
python-is-python3 \
u-boot-tools \
unzip \
wget \
xxd \
&& rm -rf /var/lib/apt/lists/*
# Configure out base setup for adding python packages
ENV PIP_DISABLE_PIP_VERSION_CHECK=true
# This disables the cache with value 0. We do not want caching as it
# increases the images size.
ENV PIP_NO_CACHE_DIR=0
# We are using the minimal python installation from the system so include
# setuptools and also wheel so we can use the binary releases of packages
# instead of requiring them to be compiled.
RUN pip3 install setuptools wheel
# Install CodeChecker and use it to statically analyze the code.
RUN pip3 install CodeChecker
# Install pytest
RUN pip3 install cxxfilt
RUN pip3 install esptool
RUN pip3 install imgtool
RUN pip3 install pexpect==4.8.0
RUN pip3 install pyelftools
RUN pip3 install pyserial==3.5
RUN pip3 install pytest==6.2.5
RUN pip3 install pytest-json==0.4.0
RUN pip3 install pytest-ordering==0.6
RUN pip3 install pytest-repeat==0.9.1
# Used to generate symbol table files
RUN mkdir /tools
WORKDIR /tools
# Pull in the tools we just built for nuttx
COPY --from=nuttx-tools /tools/bloaty/ bloaty/
ENV PATH="/tools/bloaty/bin:$PATH"
COPY --from=nuttx-tools /tools/genromfs/ /tools/genromfs/
ENV PATH="/tools/genromfs/usr/bin:$PATH"
COPY --from=nuttx-tools /tools/kconfig-frontends/ kconfig-frontends/
ENV PATH="/tools/kconfig-frontends/bin:$PATH"
# Pull in the Rust toolchain including supported targets
COPY --from=nuttx-tools /tools/rust/ /tools/rust/
ENV CARGO_HOME=/tools/rust/cargo
ENV RUSTUP_HOME=/tools/rust/rustup
ENV PATH="/tools/rust/cargo/bin:$PATH"
# ARM toolchain
COPY --from=nuttx-toolchain-arm /tools/clang-arm-none-eabi/ clang-arm-none-eabi/
RUN cp /usr/bin/clang-extdef-mapping-10 clang-arm-none-eabi/bin/clang-extdef-mapping
ENV PATH="/tools/clang-arm-none-eabi/bin:$PATH"
COPY --from=nuttx-toolchain-arm /tools/gcc-arm-none-eabi/ gcc-arm-none-eabi/
ENV PATH="/tools/gcc-arm-none-eabi/bin:$PATH"
# ARM64 toolchain
COPY --from=nuttx-toolchain-arm64 /tools/gcc-aarch64-none-elf/ gcc-aarch64-none-elf/
ENV PATH="/tools/gcc-aarch64-none-elf/bin:$PATH"
# MIPS toolchain
COPY --from=nuttx-toolchain-pinguino /tools/pinguino-compilers/p32/ pinguino-compilers/p32/
ENV PATH="/tools/pinguino-compilers/p32/bin:$PATH"
# Renesas toolchain
COPY --from=nuttx-toolchain-renesas /tools/renesas-toolchain/rx-elf-gcc/ renesas-toolchain/rx-elf-gcc/
ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH"
# RISCV toolchain
COPY --from=nuttx-toolchain-riscv /tools/riscv64-unknown-elf-gcc/ riscv64-unknown-elf-gcc/
ENV PATH="/tools/riscv64-unknown-elf-gcc/bin:$PATH"
# SPARC toolchain
COPY --from=nuttx-toolchain-sparc /tools/sparc-gaisler-elf-gcc/ sparc-gaisler-elf-gcc/
ENV PATH="/tools/sparc-gaisler-elf-gcc/bin:$PATH"
# ESP32 toolchain
COPY --from=nuttx-toolchain-esp32 /tools/xtensa-esp32-elf-gcc/ xtensa-esp32-elf-gcc/
ENV PATH="/tools/xtensa-esp32-elf-gcc/bin:$PATH"
# ESP32-S2 toolchain
COPY --from=nuttx-toolchain-esp32 /tools/xtensa-esp32s2-elf-gcc/ xtensa-esp32s2-elf-gcc/
ENV PATH="/tools/xtensa-esp32s2-elf-gcc/bin:$PATH"
# ESP32-S3 toolchain
COPY --from=nuttx-toolchain-esp32 /tools/xtensa-esp32s3-elf-gcc/ xtensa-esp32s3-elf-gcc/
ENV PATH="/tools/xtensa-esp32s3-elf-gcc/bin:$PATH"
RUN mkdir -p /tools/blobs/esp-bins
COPY --from=nuttx-toolchain-esp32 /tools/blobs/* /tools/blobs/esp-bins/
# Configure ccache
RUN mkdir -p /tools/ccache/bin && \
ln -sf `which ccache` /tools/ccache/bin/aarch64-none-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/aarch64-none-elf-g++ && \
ln -sf `which ccache` /tools/ccache/bin/arm-none-eabi-gcc && \
ln -sf `which ccache` /tools/ccache/bin/arm-none-eabi-g++ && \
ln -sf `which ccache` /tools/ccache/bin/avr-gcc && \
ln -sf `which ccache` /tools/ccache/bin/avr-g++ && \
ln -sf `which ccache` /tools/ccache/bin/cc && \
ln -sf `which ccache` /tools/ccache/bin/c++ && \
ln -sf `which ccache` /tools/ccache/bin/clang && \
ln -sf `which ccache` /tools/ccache/bin/clang++ && \
ln -sf `which ccache` /tools/ccache/bin/gcc && \
ln -sf `which ccache` /tools/ccache/bin/g++ && \
ln -sf `which ccache` /tools/ccache/bin/p32-gcc && \
ln -sf `which ccache` /tools/ccache/bin/rx-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/riscv64-unknown-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/riscv64-unknown-elf-g++ && \
ln -sf `which ccache` /tools/ccache/bin/sparc-gaisler-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/sparc-gaisler-elf-g++ && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32-elf-g++ && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32s2-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32s2-elf-g++ && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32s3-elf-gcc && \
ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32s3-elf-g++
ENV PATH="/tools/ccache/bin:$PATH"
CMD [ "/bin/bash" ]
Reference in New Issue View Git Blame Copy Permalink