9906163beb
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <david.sidrane@nscdg.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
imxrt:Kconfig fix formatting
imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map
imxrt:lpspi Fix build breakage from adding 1170
imxrt:Finish 1170 iomux and clockconfig versioning
imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4
imxrt:pmu remove duplicate dcd non 117x header
imxrt:lpspi Fix unused var warnings
imxrt:lpi2c Fix unused var warnings
imxrt:lowputs Fix unused var warnings
imxrt:imxrt117x_dmamux fix duplicate entries
imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them
imxrt:MPU Support the 1170
imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE
imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity
Author: Peter van der Perk <peter.vanderperk@nxp.com>
IMXRT7 Add LPUART 9/10/11/12 support
Author: David Sidrane <david.sidrane@nscdg.com>
imxrt:1170pinmux Add QTIMER pins
imxrt:1170pinmux Add GPT pins
imxrt:1170pinmux Add FLEXPWM pins
imxrt1170:pinmap Add GPIO_ENET_1G pinning
imxrt:enet Support ENET_1G
imxrt:periphclks rt1170 does not have canX_serial clock
imxrt:flexcan:Layer imxrt_ioctl
imxrt117x:memorymap added CAN3
imxrt:ADC support ver1 and ver2 for imxrt117x
imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn
imxrt:imxrt117x_ccm align CCM names with rt106x
imxrt:XBAR support larger number of selects needed on imxrt1170
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
FlexSPI AHB Region support, PIT rename for compatiblity
imxrt:USB Analog add VBUS_VALID_3V
FlexSPI expand prefetch registers for IMXRT117X
imxrt:Support Initialization of FlexRam without Running from OCRAM
imxrt: ocotp add UNIQUE_ID register definition
imxrt: enet use ocotp unique_id
imxrt: enet fixes for imxrt117x
imxrt: ethernet pinmux sion enable
imxrt:imxrt_periphclk_configure add memory sync
Flush the pipeline to prevent bus faults, by insuring a
peripheral is clocked before being accessed on return from
this function.
imxrt:Restructure gpioN to padmux mapping
imxrt:Add imxrt1170 daisy
imxrt: correct power modes for imxrt117x fixing hang on WFI
imxrt: imxrt117x TCM MPU config
imxrt: FlexRAM clocking DIV0 setup
imxrt: 117x periphclocks wait for status bit
imxrt: iomucx set pad settings correctly and allow reconfiguration
imxrt: enet align buffers 64-byte for optimal performance
Add DSC barriers for write-through cache support
imxrt: imxrt1170 use FlexCAN FD/ECC features
imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS
imxrt:Fix 1170 SNVS addressing
imxrt: enet set mii clock after ifdown so that phy keep working
nxstyle fixes
imxrt: preprocessor and include fixes
Fix configs
imxrt1170-evk clean defconfig
114 lines
4.0 KiB
C
114 lines
4.0 KiB
C
/****************************************************************************
|
|
* boards/arm/imxrt/imxrt1170-evk/kernel/imxrt_userspace.c
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <nuttx/userspace.h>
|
|
#include <nuttx/wqueue.h>
|
|
#include <nuttx/mm/mm.h>
|
|
|
|
#if defined(CONFIG_BUILD_PROTECTED) && !defined(__KERNEL__)
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Configuration ************************************************************/
|
|
|
|
#ifndef CONFIG_NUTTX_USERSPACE
|
|
# error "CONFIG_NUTTX_USERSPACE not defined"
|
|
#endif
|
|
|
|
#if CONFIG_NUTTX_USERSPACE != 0x30200000
|
|
# error "CONFIG_NUTTX_USERSPACE must be 0x30200000 to match user-space.ld"
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
/* These 'addresses' of these values are setup by the linker script.
|
|
* They are not actual uint32_t storage locations!
|
|
* They are only used meaningfully in the following way:
|
|
*
|
|
* - The linker script defines, for example, the symbol_sdata.
|
|
* - The declaration extern uint32_t _sdata; makes C happy. C will believe
|
|
* that the value _sdata is the address of a uint32_t variable _data (it
|
|
* is not!).
|
|
* - We can recover the linker value then by simply taking the address of
|
|
* of _data. like: uint32_t *pdata = &_sdata;
|
|
*/
|
|
|
|
extern uint32_t _stext; /* Start of .text */
|
|
extern uint32_t _etext; /* End_1 of .text + .rodata */
|
|
extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */
|
|
extern uint32_t _sdata; /* Start of .data */
|
|
extern uint32_t _edata; /* End+1 of .data */
|
|
extern uint32_t _sbss; /* Start of .bss */
|
|
extern uint32_t _ebss; /* End+1 of .bss */
|
|
|
|
/* This is the user space entry point */
|
|
|
|
int CONFIG_INIT_ENTRYPOINT(int argc, char *argv[]);
|
|
|
|
const struct userspace_s userspace locate_data(".userspace") =
|
|
{
|
|
/* General memory map */
|
|
|
|
.us_entrypoint = (main_t)CONFIG_INIT_ENTRYPOINT,
|
|
.us_textstart = (uintptr_t)&_stext,
|
|
.us_textend = (uintptr_t)&_etext,
|
|
.us_datasource = (uintptr_t)&_eronly,
|
|
.us_datastart = (uintptr_t)&_sdata,
|
|
.us_dataend = (uintptr_t)&_edata,
|
|
.us_bssstart = (uintptr_t)&_sbss,
|
|
.us_bssend = (uintptr_t)&_ebss,
|
|
|
|
/* Memory manager heap structure */
|
|
|
|
.us_heap = &g_mmheap,
|
|
|
|
/* Task/thread startup routines */
|
|
|
|
.task_startup = nxtask_startup,
|
|
|
|
/* Signal handler trampoline */
|
|
|
|
.signal_handler = up_signal_handler,
|
|
|
|
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
|
|
|
|
#ifdef CONFIG_LIBC_USRWORK
|
|
.work_usrstart = work_usrstart,
|
|
#endif
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
#endif /* CONFIG_BUILD_PROTECTED && !__KERNEL__ */
|