nuttx/arch/arm/include/cxd56xx/chip.h
Alin Jerpelea 2be1153030 Merged in alinjerpelea/nuttx (pull request #1061)
boards: cxd56xx: spresense: cleanup and new defconfig

* arch: cxd56xx: remove NVIC_SYSH redefinition

    The NVIC_SYSH is already defined in nvicpri.h

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: enable SPRESENSE_EXTENSION

    Enable high current mode for the Spresense Extension board on all examples
    that have SDCARD support

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: ifdef SDCARD_TXS02612

    The SD Card TXS02612 port expander is hosted on the Extension board and
    should not be enabled if the extension board is not prezent.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: increase MQ_MAXMSGSIZE

    This change is needed by the display driver on spresense platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: config: add lcd examples defconfig

    This is a configuration for the basic nx examples

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-24 14:26:02 +00:00

56 lines
2.7 KiB
C

/*****************************************************************************
* arch/arm/include/cxd56xx/chip.h
*
* Copyright 2018 Sony Semiconductor Solutions Corporation
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_INCLUDE_CXD56XX_CHIP_H
#define __ARCH_ARM_INCLUDE_CXD56XX_CHIP_H
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define CXD56M4_SYSH_PRIORITY_MIN 0xe0 /* All bits[7:5] set is minimum priority */
#define CXD56M4_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
#define CXD56M4_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
#define CXD56M4_SYSH_PRIORITY_STEP 0x20 /* Steps between priorities */
#define NVIC_SYSH_PRIORITY_MIN CXD56M4_SYSH_PRIORITY_MIN
#define NVIC_SYSH_PRIORITY_DEFAULT CXD56M4_SYSH_PRIORITY_DEFAULT
#define NVIC_SYSH_PRIORITY_MAX CXD56M4_SYSH_PRIORITY_MAX
#define NVIC_SYSH_PRIORITY_STEP CXD56M4_SYSH_PRIORITY_STEP
#endif /* __ARCH_ARM_INCLUDE_CXD56XX_CHIP_H */