nuttx/boards/arm/stm32/olimex-stm32-p207
Xiang Xiao 56e8bb1759 boards: Remove the unnessary CONFIG_SCHED_LPWORK=y from defconfig
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-28 18:41:51 +03:00
..
configs/nsh boards: Remove the unnessary CONFIG_SCHED_LPWORK=y from defconfig 2022-05-28 18:41:51 +03:00
include Removes STM32_BOARD_HCLK from all board.h files. It is now unneccessary. Use STM32_HCLK_FREQUENCY instead. 2021-04-06 22:42:06 -05:00
scripts Move warning option from Make.defs to Toolchain.defs 2022-05-15 15:40:35 +03:00
src arch/arm: Remove FAR and CODE from board folder(3) 2022-05-03 16:50:52 +03:00
Kconfig
README.txt

README
======

The NuttX configuration for the Olimex STM32-P207 is assembled mainly
from the configurations stm32f4discovery and stm3240g-eval.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

The following peripherals are enabled in this configuration.

 - LEDs:       show the system status

 - Buttons:    TAMPER-button, WKUP-button, J1-Joystick (consists of RIGHT-,
               UP-, LEFT-, DOWN-, and CENTER-button). Built in app
               'buttons' works.

 - ADC:        ADC1 samples the red trim potentiometer AN_TR
               Built in app 'adc' works.

 - USB-FS-OTG: Enabled but not really tested, since there is only a
               USB-A-connector (host) connected to the full speed STM32
               inputs.

 - USB-HS_OTG: The other connector (device) is connected to the high speed
               STM32 inputs (not enabled).

 - CAN:        Built in app 'can' works, but apart from that not really tested.

 - Ethernet:   Ping to other station on the network works.