sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
738a30a421
nuttx/tools/esp32c3/Config.mk
Almir Okato 16f8966fa9 esp32s2: add simple boot support 
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.

This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s2 targets and removes the need
for running 'make bootloader' command for it.

Signed-off-by: Almir Okato <almir.okato@espressif.com>
2024-06-04 18:53:14 -03:00

276 lines
9.1 KiB
Makefile
Raw Blame History

############################################################################
# tools/esp32c3/Config.mk
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# These are the macros that will be used in the NuttX make system to compile
# and assemble source files and to insert the resulting object files into an
# archive. These replace the default definitions at tools/Config.mk
ifeq ($(CONFIG_ESP32C3_FLASH_2M),y)
FLASH_SIZE := 2MB
else ifeq ($(CONFIG_ESP32C3_FLASH_4M),y)
FLASH_SIZE := 4MB
else ifeq ($(CONFIG_ESP32C3_FLASH_8M),y)
FLASH_SIZE := 8MB
else ifeq ($(CONFIG_ESP32C3_FLASH_16M),y)
FLASH_SIZE := 16MB
endif
ifeq ($(CONFIG_ESP32C3_FLASH_MODE_DIO),y)
FLASH_MODE := dio
else ifeq ($(CONFIG_ESP32C3_FLASH_MODE_DOUT),y)
FLASH_MODE := dout
else ifeq ($(CONFIG_ESP32C3_FLASH_MODE_QIO),y)
FLASH_MODE := qio
else ifeq ($(CONFIG_ESP32C3_FLASH_MODE_QOUT),y)
FLASH_MODE := qout
endif
ifeq ($(CONFIG_ESP32C3_FLASH_FREQ_80M),y)
FLASH_FREQ := 80m
else ifeq ($(CONFIG_ESP32C3_FLASH_FREQ_40M),y)
FLASH_FREQ := 40m
else ifeq ($(CONFIG_ESP32C3_FLASH_FREQ_26M),y)
FLASH_FREQ := 26m
else ifeq ($(CONFIG_ESP32C3_FLASH_FREQ_20M),y)
FLASH_FREQ := 20m
endif
ifeq ($(CONFIG_ESP32C3_FLASH_DETECT),y)
ESPTOOL_WRITEFLASH_OPTS := -fs detect -fm dio -ff $(FLASH_FREQ)
else
ESPTOOL_WRITEFLASH_OPTS := -fs $(FLASH_SIZE) -fm dio -ff $(FLASH_FREQ)
endif
ifneq ($(CONFIG_ESP32C3_SECURE_BOOT)$(CONFIG_ESP32C3_SECURE_FLASH_ENC_ENABLED),)
ESPTOOL_RESET_OPTS += --after no_reset
endif
ESPTOOL_FLASH_OPTS := -fs $(FLASH_SIZE) -fm $(FLASH_MODE) -ff $(FLASH_FREQ)
# Configure the variables according to build environment
ifdef ESPTOOL_BINDIR
ifeq ($(CONFIG_ESP32C3_APP_FORMAT_LEGACY),y)
BL_OFFSET := 0x0
PT_OFFSET := $(CONFIG_ESP32C3_PARTITION_TABLE_OFFSET)
BOOTLOADER := $(ESPTOOL_BINDIR)/bootloader-esp32c3.bin
PARTITION_TABLE := $(ESPTOOL_BINDIR)/partition-table-esp32c3.bin
FLASH_BL := $(BL_OFFSET) $(BOOTLOADER)
FLASH_PT := $(PT_OFFSET) $(PARTITION_TABLE)
ESPTOOL_BINS := $(FLASH_BL) $(FLASH_PT)
else ifeq ($(CONFIG_ESP32C3_APP_FORMAT_MCUBOOT),y)
BL_OFFSET := 0x0
ifeq ($(CONFIG_ESP32C3_SECURE_BOOT),y)
BOOTLOADER := $(ESPTOOL_BINDIR)/mcuboot-esp32c3.signed.bin
else
BOOTLOADER := $(ESPTOOL_BINDIR)/mcuboot-esp32c3.bin
endif
FLASH_BL := $(BL_OFFSET) $(BOOTLOADER)
ifneq ($(CONFIG_ESP32C3_SECURE_BOOT)$(CONFIG_ESP32C3_SECURE_FLASH_ENC_ENABLED),)
ESPTOOL_BINS :=
else
ESPTOOL_BINS := $(FLASH_BL)
endif
endif
endif
ifeq ($(CONFIG_ESP32C3_APP_FORMAT_LEGACY),y)
APP_OFFSET := 0x10000
APP_IMAGE := nuttx.bin
FLASH_APP := $(APP_OFFSET) $(APP_IMAGE)
else ifeq ($(CONFIG_ESP32C3_APP_FORMAT_MCUBOOT),y)
ifeq ($(CONFIG_ESP32C3_ESPTOOL_TARGET_PRIMARY),y)
VERIFIED := --confirm
APP_OFFSET := $(CONFIG_ESP32C3_OTA_PRIMARY_SLOT_OFFSET)
else ifeq ($(CONFIG_ESP32C3_ESPTOOL_TARGET_SECONDARY),y)
VERIFIED :=
APP_OFFSET := $(CONFIG_ESP32C3_OTA_SECONDARY_SLOT_OFFSET)
endif
ifeq ($(CONFIG_ESP32C3_SECURE_BOOT),y)
APP_IMAGE := nuttx.signed.bin
else
APP_IMAGE := nuttx.bin
endif
FLASH_APP := $(APP_OFFSET) $(APP_IMAGE)
ifeq ($(CONFIG_ESP32C3_SECURE_FLASH_ENC_ENABLED),y)
IMGTOOL_ALIGN_ARGS := --align 32 --max-align 32
else
IMGTOOL_ALIGN_ARGS := --align 4
endif
IMGTOOL_SIGN_ARGS := --pad $(VERIFIED) $(IMGTOOL_ALIGN_ARGS) -v 0 -s auto \
-H $(CONFIG_ESP32C3_APP_MCUBOOT_HEADER_SIZE) --pad-header \
-S $(CONFIG_ESP32C3_OTA_SLOT_SIZE)
endif
ESPTOOL_BINS += $(FLASH_APP)
ifeq ($(CONFIG_BUILD_PROTECTED),y)
ESPTOOL_BINS += $(CONFIG_ESP32C3_USER_IMAGE_OFFSET) nuttx_user.bin
endif
# Commands for colored and formatted output
RED = \033[1;31m
YELLOW = \033[1;33m
BOLD = \033[1m
RST = \033[0m
# Functions for printing help messages
define HELP_SIGN_APP
$(Q) echo ""
$(Q) echo "$(YELLOW)Application not signed. Sign the application before flashing.$(RST)"
$(Q) echo "To sign the application, you can use this command:"
$(Q) echo " imgtool sign -k $(ESPSEC_KEYDIR)/$(CONFIG_ESP32C3_SECURE_BOOT_APP_SIGNING_KEY) --public-key-format hash $(IMGTOOL_SIGN_ARGS) nuttx.hex nuttx.signed.bin"
$(Q) echo ""
endef
define HELP_FLASH_BOOTLOADER
$(Q) echo ""
$(Q) echo "$(YELLOW)Security features enabled, so bootloader not flashed automatically.$(RST)"
$(Q) echo "Use the following command to flash the bootloader:"
$(Q) echo " esptool.py $(ESPTOOL_OPTS) write_flash $(ESPTOOL_WRITEFLASH_OPTS) $(FLASH_BL)"
$(Q) echo ""
endef
# MERGEBIN -- Merge raw binary files into a single file
define MERGEBIN
$(Q) if [ -z $(ESPTOOL_BINDIR) ]; then \
echo "MERGEBIN error: Missing argument for binary files directory."; \
echo "USAGE: make ESPTOOL_BINDIR=<dir>"; \
exit 1; \
fi
$(Q) if [ -z $(FLASH_SIZE) ]; then \
echo "Missing Flash memory size configuration for the ESP32-C3 chip."; \
exit 1; \
fi
esptool.py -c esp32c3 merge_bin --output nuttx.merged.bin $(ESPTOOL_FLASH_OPTS) $(ESPTOOL_BINS)
$(Q) echo nuttx.merged.bin >> nuttx.manifest
$(Q) echo "Generated: nuttx.merged.bin"
endef
# SIGNBIN -- Create the signed binary image file for Secure Boot
define SIGNBIN
$(Q) echo "SIGNBIN: ESP32-C3 signed binary"
$(Q) if ! imgtool version 1>/dev/null 2>&1; then \
echo ""; \
echo "imgtool not found. Please run: \"pip install imgtool\""; \
echo ""; \
echo "Run make again to create the nuttx.signed.bin image."; \
exit 1; \
fi
$(Q) if [ -z "$(ESPSEC_KEYDIR)" ]; then \
echo "SIGNBIN error: Missing argument for secure boot keys directory."; \
echo "USAGE: make ESPSEC_KEYDIR=<dir>"; \
exit 1; \
fi
$(eval APP_SIGN_KEY := $(ESPSEC_KEYDIR)/$(subst ",,$(CONFIG_ESP32C3_SECURE_BOOT_APP_SIGNING_KEY)))
$(Q) if [ ! -f "$(APP_SIGN_KEY)" ]; then \
echo ""; \
echo "$(RED)SIGNBIN error:$(RST) Application signing key $(BOLD)$(CONFIG_ESP32C3_SECURE_BOOT_APP_SIGNING_KEY)$(RST) does not exist."; \
echo "Generate using:"; \
echo " imgtool keygen --key $(CONFIG_ESP32C3_SECURE_BOOT_APP_SIGNING_KEY) --type <ESP32C3_SECURE_SIGNED_APPS_SCHEME>"; \
echo ""; \
exit 1; \
fi
imgtool sign -k $(APP_SIGN_KEY) --public-key-format hash $(IMGTOOL_SIGN_ARGS) nuttx.hex nuttx.signed.bin
$(Q) echo nuttx.signed.bin >> nuttx.manifest
$(Q) echo "Generated: nuttx.signed.bin (MCUboot compatible)"
endef
# MKIMAGE -- Convert an ELF file into a compatible binary file
ifeq ($(CONFIG_ESP32C3_SECURE_BOOT),y)
define MKIMAGE
$(if $(CONFIG_ESP32C3_SECURE_BOOT_BUILD_SIGNED_BINARIES),$(call SIGNBIN),$(call HELP_SIGN_APP))
endef
else
ifeq ($(CONFIG_ESP32C3_APP_FORMAT_LEGACY),y)
define MKIMAGE
$(Q) echo "MKIMAGE: ESP32-C3 binary"
$(Q) if ! esptool.py version 1>/dev/null 2>&1; then \
echo ""; \
echo "esptool.py not found. Please run: \"pip install esptool==4.8.dev4\""; \
echo ""; \
echo "Run make again to create the nuttx.bin image."; \
exit 1; \
fi
$(Q) if [ -z $(FLASH_SIZE) ]; then \
echo "Missing Flash memory size configuration for the ESP32-C3 chip."; \
exit 1; \
fi
esptool.py -c esp32c3 elf2image $(ESPTOOL_FLASH_OPTS) -o nuttx.bin nuttx
$(Q) echo nuttx.bin >> nuttx.manifest
$(Q) echo "Generated: nuttx.bin (ESP32-C3 compatible)"
endef
else ifeq ($(CONFIG_ESP32C3_APP_FORMAT_MCUBOOT),y)
define MKIMAGE
$(Q) echo "MKIMAGE: ESP32-C3 binary"
$(Q) if ! imgtool version 1>/dev/null 2>&1; then \
echo ""; \
echo "imgtool not found. Please run: \"pip install imgtool\""; \
echo ""; \
echo "Run make again to create the nuttx.bin image."; \
exit 1; \
fi
imgtool sign $(IMGTOOL_SIGN_ARGS) nuttx.hex nuttx.bin
$(Q) echo nuttx.bin >> nuttx.manifest
$(Q) echo "Generated: nuttx.bin (MCUboot compatible)"
endef
endif
endif
# POSTBUILD -- Perform post build operations
define POSTBUILD
$(call MKIMAGE)
$(if $(CONFIG_ESP32C3_MERGE_BINS),$(call MERGEBIN))
endef
# ESPTOOL_BAUD -- Serial port baud rate used when flashing/reading via esptool.py
ESPTOOL_BAUD ?= 921600
# FLASH -- Download a binary image via esptool.py
define FLASH
$(Q) if [ -z $(ESPTOOL_PORT) ]; then \
echo "FLASH error: Missing serial port device argument."; \
echo "USAGE: make flash ESPTOOL_PORT=<port> [ ESPTOOL_BAUD=<baud> ]"; \
exit 1; \
fi
$(eval ESPTOOL_OPTS := -c esp32c3 -p $(ESPTOOL_PORT) -b $(ESPTOOL_BAUD) $(ESPTOOL_RESET_OPTS) $(if $(CONFIG_ESP32C3_ESPTOOLPY_NO_STUB),--no-stub))
esptool.py $(ESPTOOL_OPTS) write_flash $(ESPTOOL_WRITEFLASH_OPTS) $(ESPTOOL_BINS)
$(if $(CONFIG_ESP32C3_SECURE_BOOT)$(CONFIG_ESP32C3_SECURE_FLASH_ENC_ENABLED),$(call HELP_FLASH_BOOTLOADER))
endef
Reference in New Issue View Git Blame Copy Permalink