nuttx/boards/risc-v/k230/canmv230/scripts/ld-flat.script
Yanfeng Liu 75d0c2946d risc-v: Initial support for CanMV-k230 board and K230 chip
The code is mainly derived from the NuttX qemu-rv/rv-virt codebase.

Major changes:

- boards/Kconfig:       add new BOARD_K230_CANMV
- arch/risc-v/Kconfig:  add new CHIP_K230 chip and ARCH_RV_MMIO_BITS
- arch/risc-v/src/common/riscv_mtimer.c: use ARCH_RV_MMIO_BITS to
                        select MMIO access width

New additions:

- arch/risc-v/include/k230/: k230 SoC definitions
- arch/risc-v/src/k230/:     k230 SoC sources
- boards/risc-v/k230/canmv230/:  CanMV-K230 board sources and configs
- Documentation/platforms/risc-v/k230/: simple doc

Note that only FLAT build works for canmv230 now.

This PR has changes in RiscV common layer thus may affect other RiscV ports
It changes the mtime/mtimecmp access control from using config ARCH_RV64 to
newly intorduced config ARCH_RV_MMIO_BITS.

Original design uses ARCH_RV64 to select 64bit MMIO in riscv_mtimer.c, this
can't cope with the situation with K230 --- it has ARCH_RV64 but only can do
32bit MMIO. So a new ARCH_RV_MMIO_BITS config has been introduced. Its value
depicts the MMIO width in bits. The MMIO_BITS defaults to 32/64 for RV32/
RV64 respectively. This allows the macro to replace current use of ARCH_RV64
in riscv_mtimer.c.

The new MMIO_BITS config is a derived one, and for RiscV chips with
equal CPU and MMIO widths there is no need to explicitly set it as the
default rule will do that. Only chips with different CPU and MMIO widths
need set it in Kconfig.

So by design this change should be safe but RiscV ports should be checked.

"ostest" verification has been done for:

- canmv230/nsh
- rv-vivt/nsh
- rv-virt/nsh64

configuration generation and manual check of derived RV_MMIO_BITS has been
done for:

- star64/nsh
- arty_a7/nsh
- bl602evb/nsh

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2023-12-17 01:10:57 -08:00

132 lines
3.3 KiB
Plaintext

/****************************************************************************
* boards/risc-v/qemu-rv/rv-virt/scripts/ld.script
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
SECTIONS
{
. = 0x08000000;
.text :
{
_stext = . ;
*(.text)
*(.text.*)
*(.gnu.warning)
*(.stub)
*(.glue_7)
*(.glue_7t)
*(.jcr)
/* C++ support: The .init and .fini sections contain specific logic
* to manage static constructors and destructors.
*/
*(.gnu.linkonce.t.*)
*(.init) /* Old ABI */
*(.fini) /* Old ABI */
_etext = . ;
}
.rodata :
{
_srodata = . ;
*(.rodata)
*(.rodata1)
*(.rodata.*)
*(.gnu.linkonce.r*)
_erodata = . ;
}
.tdata : {
_stdata = ABSOLUTE(.);
*(.tdata .tdata.* .gnu.linkonce.td.*);
_etdata = ABSOLUTE(.);
}
.tbss : {
_stbss = ABSOLUTE(.);
*(.tbss .tbss.* .gnu.linkonce.tb.* .tcommon);
_etbss = ABSOLUTE(.);
}
_eronly = ABSOLUTE(.);
.data :
{
_sdata = . ;
*(.data)
*(.data1)
*(.data.*)
*(.gnu.linkonce.d*)
. = ALIGN(4);
_edata = . ;
}
/* C++ support. For each global and static local C++ object,
* GCC creates a small subroutine to construct the object. Pointers
* to these routines (not the routines themselves) are stored as
* simple, linear arrays in the .ctors section of the object file.
* Similarly, pointers to global/static destructor routines are
* stored in .dtors.
*/
.ctors :
{
_sctors = . ;
*(.ctors) /* Old ABI: Unallocated */
*(.init_array) /* New ABI: Allocated */
_edtors = . ;
}
.dtors :
{
_sdtors = . ;
*(.dtors) /* Old ABI: Unallocated */
*(.fini_array) /* New ABI: Allocated */
_edtors = . ;
}
.bss :
{
_sbss = . ;
*(.bss)
*(.bss.*)
*(.sbss)
*(.sbss.*)
*(.gnu.linkonce.b*)
*(COMMON)
_ebss = . ;
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}