nuttx/arch/arm/include/armv8-m/irq_cmnvector.h
Alin Jerpelea c39339a7a8 arch: arm: include: nxstyle fixes
nxstyle fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-22 19:28:38 -07:00

159 lines
6.4 KiB
C

/****************************************************************************
* arch/arm/include/armv8-m/irq_cmnvector.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_ARM_INCLUDE_ARMV8_M_IRQ_CMNVECTOR_H
#define __ARCH_ARM_INCLUDE_ARMV8_M_IRQ_CMNVECTOR_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Prototypes
****************************************************************************/
/* IRQ Stack Frame Format: */
/* The following additional registers are stored by the interrupt handling
* logic.
*/
#define REG_R13 (0) /* R13 = SP at time of interrupt */
#ifdef CONFIG_ARMV8M_USEBASEPRI
# define REG_BASEPRI (1) /* BASEPRI */
#else
# define REG_PRIMASK (1) /* PRIMASK */
#endif
#define REG_R4 (2) /* R4 */
#define REG_R5 (3) /* R5 */
#define REG_R6 (4) /* R6 */
#define REG_R7 (5) /* R7 */
#define REG_R8 (6) /* R8 */
#define REG_R9 (7) /* R9 */
#define REG_R10 (8) /* R10 */
#define REG_R11 (9) /* R11 */
#define REG_EXC_RETURN (10) /* EXC_RETURN */
#define SW_INT_REGS (11)
#ifdef CONFIG_ARCH_FPU
/* If the MCU supports a floating point unit, then it will be necessary
* to save the state of the non-volatile registers before calling code
* that may save and overwrite them.
*/
# define REG_S16 (SW_INT_REGS + 0) /* S16 */
# define REG_S17 (SW_INT_REGS + 1) /* S17 */
# define REG_S18 (SW_INT_REGS + 2) /* S18 */
# define REG_S19 (SW_INT_REGS + 3) /* S19 */
# define REG_S20 (SW_INT_REGS + 4) /* S20 */
# define REG_S21 (SW_INT_REGS + 5) /* S21 */
# define REG_S22 (SW_INT_REGS + 6) /* S22 */
# define REG_S23 (SW_INT_REGS + 7) /* S23 */
# define REG_S24 (SW_INT_REGS + 8) /* S24 */
# define REG_S25 (SW_INT_REGS + 9) /* S25 */
# define REG_S26 (SW_INT_REGS + 10) /* S26 */
# define REG_S27 (SW_INT_REGS + 11) /* S27 */
# define REG_S28 (SW_INT_REGS + 12) /* S28 */
# define REG_S29 (SW_INT_REGS + 13) /* S29 */
# define REG_S30 (SW_INT_REGS + 14) /* S30 */
# define REG_S31 (SW_INT_REGS + 15) /* S31 */
# define SW_FPU_REGS (16)
#else
# define SW_FPU_REGS (0)
#endif
/* The total number of registers saved by software */
#ifdef CONFIG_ARMV8M_STACKCHECK_HARDWARE
# define REG_SPLIM (SW_INT_REGS + SW_FPU_REGS + 0) /* REG_SPLIM */
# define SW_XCPT_REGS (SW_INT_REGS + SW_FPU_REGS + 1)
#else
# define SW_XCPT_REGS (SW_INT_REGS + SW_FPU_REGS)
#endif
#define SW_XCPT_SIZE (4 * SW_XCPT_REGS)
/* On entry into an IRQ, the hardware automatically saves the following
* registers on the stack in this (address) order:
*/
#define REG_R0 (SW_XCPT_REGS + 0) /* R0 */
#define REG_R1 (SW_XCPT_REGS + 1) /* R1 */
#define REG_R2 (SW_XCPT_REGS + 2) /* R2 */
#define REG_R3 (SW_XCPT_REGS + 3) /* R3 */
#define REG_R12 (SW_XCPT_REGS + 4) /* R12 */
#define REG_R14 (SW_XCPT_REGS + 5) /* R14 = LR */
#define REG_R15 (SW_XCPT_REGS + 6) /* R15 = PC */
#define REG_XPSR (SW_XCPT_REGS + 7) /* xPSR */
#define HW_INT_REGS (8)
#ifdef CONFIG_ARCH_FPU
/* If the FPU is enabled, the hardware also saves the volatile FP registers.
*/
# define REG_S0 (SW_XCPT_REGS + 8) /* S0 */
# define REG_S1 (SW_XCPT_REGS + 9) /* S1 */
# define REG_S2 (SW_XCPT_REGS + 10) /* S2 */
# define REG_S3 (SW_XCPT_REGS + 11) /* S3 */
# define REG_S4 (SW_XCPT_REGS + 12) /* S4 */
# define REG_S5 (SW_XCPT_REGS + 13) /* S5 */
# define REG_S6 (SW_XCPT_REGS + 14) /* S6 */
# define REG_S7 (SW_XCPT_REGS + 15) /* S7 */
# define REG_S8 (SW_XCPT_REGS + 16) /* S8 */
# define REG_S9 (SW_XCPT_REGS + 17) /* S9 */
# define REG_S10 (SW_XCPT_REGS + 18) /* S10 */
# define REG_S11 (SW_XCPT_REGS + 19) /* S11 */
# define REG_S12 (SW_XCPT_REGS + 20) /* S12 */
# define REG_S13 (SW_XCPT_REGS + 21) /* S13 */
# define REG_S14 (SW_XCPT_REGS + 22) /* S14 */
# define REG_S15 (SW_XCPT_REGS + 23) /* S15 */
# define REG_FPSCR (SW_XCPT_REGS + 24) /* FPSCR */
# define REG_FP_RESERVED (SW_XCPT_REGS + 25) /* Reserved */
# define HW_FPU_REGS (18)
#else
# define HW_FPU_REGS (0)
#endif
#define HW_XCPT_REGS (HW_INT_REGS + HW_FPU_REGS)
#define HW_XCPT_SIZE (4 * HW_XCPT_REGS)
#define XCPTCONTEXT_REGS (HW_XCPT_REGS + SW_XCPT_REGS)
#define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS)
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Inline functions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#endif /* __ARCH_ARM_INCLUDE_ARMV8_M_IRQ_CMNVECTOR_H */