nuttx/arch/arm/src/stm32/stm32.h
patacongo 0dcb28180d Add Ethernet pin/clock configuration logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4148 42af7a65-404d-4744-a932-0658087f49c3
2011-12-08 22:14:48 +00:00

95 lines
3.6 KiB
C

/************************************************************************************
* arch/arm/src/stm32/stm32.h
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Authors: Uros Platise <uros.platise@isotel.eu>
* Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32_STM32_H
#define __ARCH_ARM_SRC_STM32_STM32_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include "up_internal.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Additional Configuration *********************************************************/
#if !defined(CONFIG_DEBUG) || !defined(CONFIG_DEBUG_VERBOSE)
# undef CONFIG_DEBUG_DMA
#endif
/* NVIC priority levels *************************************************************/
#define NVIC_SYSH_PRIORITY_MIN 0xff /* All bits set in minimum priority */
#define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
#define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
/* Peripherals **********************************************************************/
#include "chip.h"
#include "stm32_adc.h"
//#include "stm32_bkp.h"
#include "stm32_can.h"
#include "stm32_dbgmcu.h"
#include "stm32_dma.h"
#include "stm32_exti.h"
#include "stm32_flash.h"
#include "stm32_fsmc.h"
#include "stm32_gpio.h"
#include "stm32_i2c.h"
#include "stm32_pwr.h"
#include "stm32_rcc.h"
#include "stm32_rtc.h"
#include "stm32_sdio.h"
#include "stm32_spi.h"
#include "stm32_tim.h"
#include "stm32_uart.h"
#include "stm32_usbdev.h"
#include "stm32_wdg.h"
#include "stm32_lowputc.h"
#include "stm32_eth.h"
#endif /* __ARCH_ARM_SRC_STM32_STM32_H */