Pierre-noel Bouteville 76f12b1f69 I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.

2016-07-14 07:29:39 -06:00

..

chip

STM32 CAN: Bitfield definitions should be unsigned

2016-06-29 13:59:33 -04:00

gnu

STM32: Add support for the IAR compiler

2016-04-02 06:58:55 -06:00

iar

STM32: Add support for the IAR compiler

2016-04-02 06:58:55 -06:00

chip.h

Add stm32f105r support

2016-06-06 12:52:41 -07:00

Kconfig

STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX.

2016-07-06 13:37:08 -06:00

Make.defs

STM32: Add support for Tickless mode (two timer implementation)

2016-07-06 12:48:30 -06:00

stm32_1wire.c

1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic.

2016-05-25 17:56:47 -06:00

stm32_1wire.h

Costmetic changes from review of last PR

2016-05-25 18:04:39 -06:00

stm32_adc.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_adc.h

…

stm32_aes.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_aes.h

…

stm32_alarm.h

STM32 F4: Add a custom RTC driver

2016-04-02 10:46:10 -06:00

stm32_allocateheap.c

Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION

2016-06-15 14:48:06 -06:00

stm32_bbsram.c

STM32 BBSRAM fixed (and formated) flags

2016-06-28 16:25:04 -10:00

stm32_bbsram.h

Mostly costmetic changes from review of last PR

2016-06-29 07:33:30 -06:00

stm32_bkp.h

…

stm32_can.c

STM32L4 CAN: Port support for both RX FIFOs from STM32 CAN

2016-06-29 13:59:29 -04:00

stm32_can.h

…

stm32_capture.c

Correct conditional compilation in STM32 timer cpature logic

2016-06-03 08:41:53 -06:00

stm32_capture.h

…

stm32_ccm.c

…

stm32_ccm.h

…

stm32_dac.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_dac.h

…

stm32_dbgmcu.h

…

stm32_dma2d.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_dma2d.h

…

stm32_dma.c

Fix STM32 DMA code and configuration for STM32F37X chips

2016-06-09 05:02:43 +02:00

stm32_dma.h

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32_dumpgpio.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_eth.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_eth.h

…

stm32_exti_alarm.c

…

stm32_exti_gpio.c

…

stm32_exti_pwr.c

…

stm32_exti_pwr.h

…

stm32_exti.h

…

stm32_flash.c

…

stm32_flash.h

…

stm32_freerun.c

STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX.

2016-07-06 13:37:08 -06:00

stm32_freerun.h

STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX.

2016-07-06 13:37:08 -06:00

stm32_fsmc.h

…

stm32_getc.c

Update some comments

2016-06-04 13:04:13 -06:00

stm32_getc.h

KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc

2016-06-04 11:29:27 -06:00

stm32_gpio.c

hen configuring a GPIO via stm32_configgpio() the function will first set the mode to output and then set the initial state of the gpio later on. If you have an application with an externaly pulled-up pin, this would lead to a glitch on the line that may be dangerous in some applications (e.G. Reset Line for other chips, etc). This changes sets the output state before configuring the pin as an output.

2016-06-17 06:23:18 -06:00

stm32_gpio.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_i2c_alt.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_i2c.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_i2c.h

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:08:23 -06:00

stm32_idle.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_irq.c

efm32, lcp43, stm32, stm32l4: disable interrupts with NVIC_IRQ_CLEAR

2016-06-28 15:12:39 -04:00

stm32_iwdg.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_lowputc.c

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_lowputc.h

…

stm32_lse.c

…

stm32_lsi.c

…

stm32_ltdc.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_ltdc.h

…

stm32_mpuinit.c

…

stm32_mpuinit.h

…

stm32_oneshot.c

STM32: Fix bug in oneshot timer

2016-07-13 10:20:38 -06:00

stm32_oneshot.h

STM32: Add support for Tickless mode (two timer implementation)

2016-07-06 12:48:30 -06:00

stm32_otgfs.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_otgfsdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_otgfshost.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_otghs.h

…

stm32_otghsdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_otghshost.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_pm.h

…

stm32_pminitialize.c

…

stm32_pmsleep.c

…

stm32_pmstandby.c

…

stm32_pmstop.c

…

stm32_procfs_ccm.c

Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()

2016-06-11 15:50:49 -06:00

stm32_pwm.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_pwm.h

…

stm32_pwr.c

…

stm32_pwr.h

…

stm32_qencoder.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32_qencoder.h

…

stm32_rcc.c

Eliminate a warning

2016-06-16 16:22:01 -06:00

stm32_rcc.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_rng.c

Add _ to the beginning of all debug macros to avoid name collisions

2016-06-16 12:33:32 -06:00

stm32_rtc_lowerhalf.c

alarm 10 now runs to completion

2016-05-31 14:17:52 -07:00

stm32_rtc.c

Eliminate a warning

2016-06-16 15:26:19 -06:00

stm32_rtc.h

STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.

2016-06-16 09:52:15 -06:00

stm32_rtcc.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_rtcounter.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_sdio.c

Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().

2016-06-20 12:44:38 -06:00

stm32_sdio.h

…

stm32_serial.c

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_spi.c

Centralize definitions associated with CONFIG_DEBUG_SPI

2016-06-15 10:41:13 -06:00

stm32_spi.h

For STM32, rename up_spiinitialize to stm32_spibus_initialize

2016-01-26 12:22:27 -06:00

stm32_start.c

I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.

2016-07-14 07:29:39 -06:00

stm32_syscfg.h

STM32: Add support for STM32F46xxx

2016-03-01 12:18:07 -05:00

stm32_tickless.c

STM32: Add support for Tickless mode (two timer implementation)

2016-07-06 12:48:30 -06:00

stm32_tim_lowerhalf.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32_tim.c

STM32 timer: Eliminate a warning

2016-07-11 13:13:17 -06:00

stm32_tim.h

STM32 timer: Reorganize to conform better with the NuttX coding style

2016-07-06 13:36:17 -06:00

stm32_timerisr.c

…

stm32_uart.h

STM32: Hook 1-Wire driver into the build system

2016-05-25 12:31:32 -06:00

stm32_uid.c

…

stm32_uid.h

…

stm32_usbdev.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32_usbdev.h

…

stm32_usbhost.c

…

stm32_usbhost.h

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

stm32_userspace.c

…

stm32_userspace.h

…

stm32_waste.c

…

stm32_waste.h

…

stm32_wdg.h

…

stm32_wwdg.c

Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().

2016-06-20 11:59:15 -06:00

stm32.h

Centralize definitions associated with CONFIG_DEBUG_CAN

2016-06-15 15:45:27 -06:00

stm32f10xxx_dma.c

Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled

2016-06-12 14:44:04 -06:00

stm32f10xxx_rcc.c

…

stm32f20xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f20xxx_rcc.c

Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()

2016-02-13 19:11:09 -06:00

stm32f30xxx_i2c.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f30xxx_rcc.c

…

stm32f37xxx_rcc.c

…

stm32f40xxx_alarm.h

RTC lower half was missing call to F4 alarm cancel function

2016-04-04 08:23:09 -06:00

stm32f40xxx_dma.c

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 09:38:16 -06:00

stm32f40xxx_rcc.c

I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.

2016-07-14 07:29:39 -06:00

stm32f40xxx_rtcc.c

STM32 F4 RTC: Fix some long lines

2016-06-28 16:55:06 -06:00

stm32l15xxx_rcc.c

…