..
a1x
Squashed commit of the following:
2018-06-21 10:59:58 -06:00
arm
Replace all ASSERT with DEBUGASSERT to save the code space
2018-08-24 06:58:30 -06:00
armv6-m
arm syscalls: svcall/sycall logic needs to get the ucontext argument from R4 instead of stack since all syscall parameters pass from registers in syscall.h
2018-08-24 07:11:18 -06:00
armv7-a
arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.
2018-09-20 21:40:29 -06:00
armv7-m
arch/arm/src/stm32h7: Remove old references to RXDMA. Add configuration option to select the Rx FIFO threshold level.
2018-09-02 08:35:22 -06:00
armv7-r
arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.
2018-09-20 21:40:29 -06:00
bcm2708
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
2018-10-10 06:45:03 -06:00
c5471
Rename devif_loopback_out to devi_loopback
2018-08-25 08:33:21 -06:00
common
up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined
2018-08-24 14:50:45 -06:00
dm320
efm32
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
2018-10-10 06:45:03 -06:00
imx1
imx6
Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115.
2018-08-05 10:48:02 -06:00
imxrt
Merged in david_s5/nuttx/master_imxrt (pull request #737 )
2018-10-23 22:54:28 +00:00
kinetis
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
2018-10-10 06:45:03 -06:00
kl
lc823450
Merged in masayuki2009/nuttx.nuttx/lc823450_mpu_for_flat (pull request #728 )
2018-09-27 11:34:22 +00:00
lpc11xx
Fix lots of typos in C comments and Kconfig help text
2018-07-08 18:24:45 -06:00
lpc17xx
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
lpc31xx
Replace non critical PANIC with DEBUGPANIC to save the code space
2018-08-24 06:21:15 -06:00
lpc43xx
Eliminate some warnings.
2018-10-25 06:48:11 -06:00
lpc54xx
Eliminate some warnings.
2018-10-25 06:48:11 -06:00
lpc214x
lpc2378
moxart
Squashed commit of the following:
2018-08-26 11:17:33 -06:00
nrf52
Merged in ebsong/nuttx (pull request #722 )
2018-09-21 03:18:38 +00:00
nuc1xx
Fix lots of typos in C comments and Kconfig help text
2018-07-08 18:24:45 -06:00
sam34
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
sama5
Remove a warning
2018-09-16 13:04:12 -06:00
samd2l2
configs/metro-m4: Fix RxD PAD selection. Add a configuration option to use OSCULP32K instead of XOSC32K.
2018-09-01 14:38:19 -06:00
samd5e5
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
samv7
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
stm32
Merged in antmerlino/nuttx/stm32f20xx-kconfig-fix (pull request #745 )
2018-10-31 03:53:13 +00:00
stm32f0
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
2018-10-10 06:29:29 -06:00
stm32f7
arch/arm/src/stm32f7/stm32_flash.c: Allow programming OTP blocks through progmem interface
2018-10-22 06:17:18 -06:00
stm32h7
Trivial, cosmetic changes from review of last PR.
2018-10-28 06:55:20 -06:00
stm32l4
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
2018-10-10 06:29:29 -06:00
str71x
Replace non critical PANIC with DEBUGPANIC to save the code space
2018-08-24 06:21:15 -06:00
tiva
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
tms570
Replace all ASSERT with DEBUGASSERT to save the code space
2018-08-24 06:58:30 -06:00
xmc4
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
2018-09-21 21:32:50 -06:00
.gitignore
Makefile
Squashed commit of the following:
2018-06-20 12:30:37 -06:00
7750e55d15