nuttx/arch/xtensa/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_XTENSA

choice
	prompt "XTENSA architecture selection"
	default ARCH_CHIP_ESP32

config ARCH_CHIP_ESP32
	bool "Espressif ESP32"
	select ARCH_FAMILY_LX6
	select XTENSA_HAVE_INTERRUPTS
	select ARCH_HAVE_MULTICPU
	select ARCH_HAVE_MODULE_TEXT
	select ARCH_HAVE_SDRAM
	select ARCH_HAVE_RESET
	select ARCH_TOOLCHAIN_GNU
	select ARCH_VECNOTIRQ
	select LIBC_ARCH_MEMCPY
	select LIBC_ARCH_MEMCHR
	select LIBC_ARCH_MEMCMP
	select LIBC_ARCH_MEMCCMP
	select LIBC_ARCH_MEMMOVE
	select LIBC_ARCH_MEMSET
	---help---
		The ESP32 is a dual-core system from Espressif with two Harvard
		architecture Xtensa LX6 CPUs. All embedded memory, external memory
		and peripherals are located on the data bus and/or the instruction
		bus of these CPUs. With some minor exceptions, the address mapping
		of two CPUs is symmetric, meaning they use the same addresses to
		access the same memory.

		The two CPUs are named "PRO_CPU" and "APP_CPU" (for "protocol" and
		"application"), however for most purposes the two CPUs are
		interchangeable.

config ARCH_CHIP_ESP32S2
	bool "Espressif ESP32-S2"
	select ARCH_FAMILY_LX7
	select XTENSA_HAVE_INTERRUPTS
	select ARCH_HAVE_MODULE_TEXT
	select ARCH_HAVE_SDRAM
	select ARCH_HAVE_RESET
	select ARCH_TOOLCHAIN_GNU
	select ARCH_VECNOTIRQ
	select LIBC_ARCH_MEMCPY
	select LIBC_ARCH_MEMCHR
	select LIBC_ARCH_MEMCMP
	select LIBC_ARCH_MEMCCMP
	select LIBC_ARCH_MEMMOVE
	select LIBC_ARCH_MEMSET
	select LIBC_ARCH_STRCHR
	select LIBC_ARCH_STRCMP
	select LIBC_ARCH_STRCPY
	select LIBC_ARCH_STRLCPY
	select LIBC_ARCH_STRNCPY
	select LIBC_ARCH_STRLEN
	select LIBC_ARCH_STRNLEN
	---help---
		The ESP32-S2 is a dual-core system from Espressif with a
		Harvard architecture Xtensa LX7 CPU.

config ARCH_CHIP_XTENSA_CUSTOM
	bool "Custom XTENSA chip"
	select ARCH_CHIP_CUSTOM
	---help---
		Select this option if there is no directory for the chip under arch/xtensa/src/.


endchoice # XTENSA chip selection

config ARCH_FAMILY_LX6
	bool
	default n
	---help---
		Cadence® Tensilica® Xtensa® LX6 data plane processing unit (DPU).
		The LX6 is a configurable and extensible processor core.

config ARCH_FAMILY_LX7
	bool
	default n
	---help---
		Cadence® Tensilica® Xtensa® LX7 data plane processing unit (DPU).
		The LX7 is a configurable and extensible processor core.

config ARCH_CHIP
	string
	default "esp32"		if ARCH_CHIP_ESP32
	default "esp32s2"	if ARCH_CHIP_ESP32S2

config XTENSA_CP_LAZY
	bool "Lazy co-processor state restoration"
	default n
	depends on EXPERIMENTAL
	---help---
		NuttX logic saves and restores the co-processor enabled (CPENABLE)
		register on each context switch.  This has disadvantages in that (1)
		co-processor context will be saved and restored even if the co-
		processor was never used, and (2) tasks must explicitly enable and
		disable co-processors.

		An alternative, "lazy" co-processor state restore is enabled with
		this option.  That logic works like as follows:

		a. CPENABLE is set to zero on each context switch, disabling all co-
		   processors.
		b. If/when the task attempts to use the disabled co-processor, an
		   exception occurs
		c. The co-processor exception handler re-enables the co-processor.

config XTENSA_USE_OVLY
	bool
	default n
	---help---
		Enable code overlay support. This option is currently unsupported.

config XTENSA_CP_INITSET
	hex "Default co-processor enables"
	default 0x0001
	range 0 0xffff
	depends on !XTENSA_CP_LAZY
	---help---
		Co-processors may be enabled on a thread by calling xtensa_coproc_enable()
		and disabled by calling xtensa_coproc_disable().  Some co-processors
		should be enabled on all threads by default.  That set of co-processors
		is provided by CONFIG_XTENSA_CP_INITSET.  Each bit corresponds to one
		coprocessor with the same bit layout as for the CPENABLE register.

config XTENSA_DUMPBT_ON_ASSERT
	bool "Dump backtrace on assertions"
	default y
	depends on DEBUG_ALERT
	---help---
		Enable a backtrace dump on assertions.

config XTENSA_BTDEPTH
	int "Backtrace depth"
	default 50
	depends on XTENSA_DUMPBT_ON_ASSERT
	---help---
		This is the depth of the backtrace.

config XTENSA_INTBACKTRACE
	bool "Full backtrace from interrupts"
	default n
	depends on XTENSA_DUMPBT_ON_ASSERT
	---help---
		Add necessary logic to be able to have a full backtrace from an interrupt context.

config XTENSA_IMEM_USE_SEPARATE_HEAP
	bool "Use a separate heap for internal memory"
	default n
	help
		This is a separate internal heap that's used by drivers when certain operations
		are not possible with the provided buffer(s).
		Mainly, when the provided buffer comes from external RAM and a DMA or flash
		operation is going to be performed.
		This separate heap will be part of the internal DRAM.

config XTENSA_IMEM_REGION_SIZE
	hex "DRAM region size for internal use"
	depends on XTENSA_IMEM_USE_SEPARATE_HEAP
	default 0x18000

config XTENSA_EXTMEM_BSS
	bool "Allow BSS section in external memory"
	default n
	help
		Adds a section and an attribute that allows to force variables into
		the external memory.

source arch/xtensa/src/lx6/Kconfig
if ARCH_CHIP_ESP32
source arch/xtensa/src/esp32/Kconfig
endif

source arch/xtensa/src/lx7/Kconfig
if ARCH_CHIP_ESP32S2
source arch/xtensa/src/esp32s2/Kconfig
endif

endif # ARCH_XTENSA