sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
780366de62
nuttx/Documentation/platforms/arm64/a64/boards/pinephone/#index.rst#
raiden00pl 56529d2944 Documentation: migrate the rest boards 
- migrated /README are removed from /boards

- there are a lot of READMEs that should be further converted to rst.
  At the moment they are moved to Documentation/platforms and included in rst files
2023-10-26 18:13:34 -03:00

197 lines
6.2 KiB
Plaintext
Raw Blame History

================
PINE64 PinePhone
================
`PinePhone <https://wiki.pine64.org/index.php/PinePhone>`_ is an ARM64 smartphone created by PINE64.
Features
========
- **System on Chip:** Allwinner A64
- **CPU:** Quad-Core ARM Cortex-A53
- **GPU:** ARM Mali400 MP2
- **Interrupt Controller:** ARM GIC PL400 (Generic Interrupt Controller v2)
- **Display Engine:** Allwinner Display Engine 2.0 (MIPI DSI with DMA)
- **Display:** Xingbangda XBD599 HD IPS Display (5.95 inches, 1440x720 resolution, 16M colors, PWM Backlight)
- **Touch Panel:** Goodix GT917S Capacitive Touch Panel (I2C)
- **LCD Controller:** Sitronix ST7703 (MIPI DSI)
- **RAM:** 2GB or 3GB LPDDR3 SDRAM
- **Internal Storage:** 16GB or 32GB eMMC, extendable up to 2TB via microSD
- **Back Camera:** Single 5MP, 1/4", LED Flash
- **Front Camera:** Single 2MP, f/2.8, 1/5"
- **Sound:** Loudspeaker, 3.5mm jack & mic (jack doubles as Hardware UART if Privacy Switch 6 is Off)
- Modem: Quectel EG25-G
- **LTE-FDD, LTE-TDD, WCDMA, GSM**
- **GNSS:** GPS / GLONASS / BeiDou / Galileo / QZSS, with A-GPS
- 2.4 GHz Wireless: Realtek RTL8723CS
- **WLAN:** WiFi 802.11 b/g/n, single-band, hotspot
- **Bluetooth:** 4.0, A2DP
- **Magnetometer:** STMicroelectronics LIS3MDL
- **Ambient Light / Proximity:** SensorTek STK3335
- **Accelerometer / Gyroscope:** InvenSense MPU-6050 (I2C)
- **Privacy Switches:** Modem, WiFi & Bluetooth, Microphone, Cameras, Headphone
- **Battery:** Lithium-ion, rated capacity 2800mAh (10.64Wh), typical capacity 3000mAh (11.40Wh)
- **I/O:** USB Type-C, USB Host, DisplayPort Alternate Mode output, 15W 5V 3A Quick Charge, follows USB PD specification
- **Power Management Integrated Circuit:** X-Powers AXP803 (Reduced Serial Bus)
Serial Console
==============
A `PinePhone Serial Debug Cable <https://wiki.pine64.org/index.php/PinePhone#Serial_console>`_
is required to run NuttX on PinePhone.
On PinePhone, set the `Privacy Switch 6 (Headphone) <https://wiki.pine64.org/index.php/PinePhone#Privacy_switch_configuration>`_
to **Off**.
Connect PinePhone to our computer with the Serial Debug Cable.
On our computer, start a Serial Terminal and connect to the USB Serial Port
at **115.2 kbps**.
NuttX will appear in the Serial Console when it boots on PinePhone.
ARM64 Toolchain
===============
Before building NuttX for PinePhone, download the ARM64 Toolchain for
**AArch64 Bare-Metal Target** ``aarch64-none-elf`` from
`Arm GNU Toolchain Downloads <https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads>`_.
(Skip the section for Beta Releases)
Add the downloaded toolchain ``gcc-arm-...-aarch64-none-elf/bin``
to the ``PATH`` Environment Variable.
Check the ARM64 Toolchain:
.. code:: console
$ aarch64-none-elf-gcc -v
Building
========
To build NuttX for PinePhone, :doc:`install the prerequisites </quickstart/install>` and
:doc:`clone the git repositories </quickstart/install>` for ``nuttx`` and ``apps``.
Configure the NuttX project and build the project:
.. code:: console
$ cd nuttx
$ tools/configure.sh pinephone:lvgl
$ make
$ cp nuttx.bin Image
$ rm -f Image.gz
$ gzip Image
This produces the file ``Image.gz``, which will be copied to PinePhone in the next step.
If the build fails with the error ``token "@" is not valid in preprocessor``,
`apply this patch <https://github.com/apache/nuttx/pull/7284/commits/518b0eb31cb66f25b590ae9a79ab16c319b96b94#diff-12291efd8a0ded1bc38bad733d99e4840ae5112b465c04287f91ba5169612c73>`_
to ``gcc-arm-none-eabi/arm-none-eabi/include/_newlib_version.h``
in the ARM64 Toolchain.
Booting
=======
NuttX boots on PinePhone via a microSD Card. To prepare the microSD Card, download the
**PinePhone Jumpdrive Image** ``pine64-pinephone.img.xz`` from
`dreemurrs-embedded/Jumpdrive <https://github.com/dreemurrs-embedded/Jumpdrive/releases>`_.
Write the downloaded image to a microSD Card with
`Balena Etcher <https://www.balena.io/etcher/>`_.
Copy the file ``Image.gz`` from the previous section
and overwrite the file on the microSD Card.
Check that PinePhone is connected to our computer via a
`Serial Debug Cable <https://wiki.pine64.org/index.php/PinePhone#Serial_console>`_ at 115.2 kbps.
`Privacy Switch 6 (Headphone) <https://wiki.pine64.org/index.php/PinePhone#Privacy_switch_configuration>`_
should be set to **Off**.
Insert the microSD Card into PinePhone and power up PinePhone.
NuttX boots on PinePhone and NuttShell (nsh) appears in the Serial Console.
To see the available commands in NuttShell:
.. code:: console
$ help
To run the LVGL Touchscreen Demo:
.. code:: console
$ lvgldemo widgets
LEDs
====
The supported PinePhone LEDs are:
===== ========= ===
Index LED PIO
===== ========= ===
LED1 Green LED PD18
LED2 Red LED PD19
LED3 Blue LED PD20
===== ========= ===
Configurations
==============
lcd
___
Supports LCD Display (XBD599) with LCD Controller (ST7703),
Display Engine 2.0, MIPI Display Serial Interface (DSI),
Power Management Integrated Circuit (AXP803) and
Reduced Serial Bus (RSB).
Serial Console is enabled on UART0 at 115.2 kbps.
lvgl
____
Supports all the features in ``lcd``,
plus LVGL Graphics Library and Touch Panel (GT917S).
Serial Console is enabled on UART0 at 115.2 kbps.
nsh
---
Basic configuration that runs NuttShell (nsh).
This configuration is focused on low level, command-line driver testing.
Built-in applications are supported, but none are enabled.
Serial Console is enabled on UART0 at 115.2 kbps.
sensor
------
Supports Accelerometer / Gyroscope (MPU-6050),
Power Management Integrated Circuit (AXP803) and
Reduced Serial Bus (RSB).
Serial Console is enabled on UART0 at 115.2 kbps.
Peripheral Support
==================
NuttX for PinePhone supports these peripherals:
======================== ======= =====
Peripheral Support NOTES
======================== ======= =====
Accelerometer (MPU-6050) Yes
Backlight Yes
Display Engine Yes
Frame Buffer Yes
LCD Controller (ST7703) Yes
LCD Panel (XBD599) Yes
MIPI D-PHY Yes
MIPI DSI Yes
PIO Yes
PMIC (AXP803) Yes
RSB Yes
TCON0 Yes
TWI / I2C Yes
Touch Panel (GT917S) Yes
UART Yes
======================== ======= =====
Reference in New Issue View Git Blame Copy Permalink