nuttx/Documentation/platforms/avr/atmega/index.rst
raiden00pl 56529d2944 Documentation: migrate the rest boards
- migrated /README are removed from /boards

- there are a lot of READMEs that should be further converted to rst.
  At the moment they are moved to Documentation/platforms and included in rst files
2023-10-26 18:13:34 -03:00

84 lines
1.6 KiB
ReStructuredText

================
Microchip Atmega
================
ATMega128
---------
This port of NuttX to the Amber Web Server from
`SoC Robotics <http://www.soc-robotics.com/index.htm>`__ is partially
completed. The Amber Web Server is based on an Microchip ATMega128.
Atmega1284P
-----------
The Atmega1284P is a chip from Microchip ("inherited" from Atmel) with the
following features:
- 16MHz 8bit AVR RISC Processor
- 128Kbyte Flash
- 16Kbyte RAM
- 4Kbyte EEPROM
- 2 High Speed Serial Ports
- 2 8-bit Timer/Counters
- 2 16-bit Timer/Counter
- 1 Master/Slave SPI
- 1 I2C controller (aka Two-Wire interface)
- 8Ch 10bit Analog Input port
- up to 32 GPIOs
- Watchdog timer
- Real Time Clock
- JTAG/OCD Interface
AVR ATMega2560
--------------
Extension of the AVR architecture to support the
ATMega2560 and specifi support for the Arduion MEGA2560 board were
contributed by Dimitry Kloper and first released in NuttX-7.14.
Clock Configuration
===================
System Timer
============
Peripheral Support
==================
The following list indicates peripherals supported in NuttX:
========== ======= =====
Peripheral Support Notes
========== ======= =====
GPIO Yes
PWM No
ADC No
RTC No
WTD No
I2C No
SPI No
TIMER Yes
UART Yes
========== ======= =====
UART
----
UART is implemented using interrupts. The chip doesn't support DMA.
TIMER
-----
The TIMER peripheral is exposed as standard timer.
Supported Boards
================
.. toctree::
:glob:
:maxdepth: 1
boards/*/*