sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
78ccf7cb91
nuttx/boards/arm/stm32/olimex-stm32-e407/include/board.h
Alin Jerpelea 78ccf7cb91 NuttX: Neil Hancock: update licenses to Apache 
Neil Hancock has submitted the ICLA and we can migrate the licenses
 to Apache.

Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
 to Apache.

David Sidrane has submitted the ICLA and we can migrate the licenses
 to Apache.

Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-01 12:13:12 -05:00

253 lines
9.0 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/olimex-stm32-e407/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_OLIMEX_STM32_E407_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32_OLIMEX_STM32_E407_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
#endif
#ifdef __KERNEL__
# include "stm32_rcc.h"
# include "stm32_sdio.h"
# include "stm32.h"
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *************************************************************************/
/* The Olimex-STM32-E407 board features a 12MHz crystal and
* a 32kHz RTC backup crystal.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
* PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
* Flash Latency(WS) : 5
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC (30-60KHz, uncalibrated)
* HSE - On-board crystal frequency is 12MHz
* LSE - 32.768 kHz
* STM32F407ZGT6 - too 168Mhz
*/
#define STM32_BOARD_XTAL 12000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (25,000,000 / 12) * 360
* = 240,000,000
* SYSCLK = PLL_VCO / PLLP
* = 240,000,000 / 2 = 120,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 240,000,000 / 5 = 48,000,000
* = 48,000,000
*
* Xtal /M *n /P SysClk AHB HCLK APB1 PCLK1
* 12Mhz HSE /12 336 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
* 12Mhz HSE /6 168 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(3)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(84)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
#define STM32_SYSCLK_FREQUENCY 168000000ul
/* AHB clock (HCLK) is SYSCLK (168MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same as APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM3_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM4_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM5_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM6_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any
* way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED_STATUS 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED_STATUS_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the
* Olimex STM32-E405. The following definitions describe how NuttX controls the LEDs:
*/
#define LED_STARTED 0 /* LED_STATUS on */
#define LED_HEAPALLOCATE 1 /* no change */
#define LED_IRQSENABLED 2 /* no change */
#define LED_STACKCREATED 3 /* no change */
#define LED_INIRQ 4 /* no change */
#define LED_SIGNAL 5 /* no change */
#define LED_ASSERTION 6 /* LED_STATUS off */
#define LED_PANIC 7 /* LED_STATUS blinking */
/* Button definitions ***************************************************************/
/* The Olimex STM32-E405 supports one buttons: */
#define BUTTON_BUT 0
#define NUM_BUTTONS 1
#define BUTTON_BUT_BIT (1 << BUTTON_BUT)
/* Alternate function pin selections ************************************************/
/* USART1 */
#define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
#define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
/* USART2 */
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
/* USART3 */
#define GPIO_USART3_RX GPIO_USART3_RX_1 /* PB11 */
#define GPIO_USART3_TX GPIO_USART3_TX_1 /* PB10 */
/* CAN */
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */
/* I2C */
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1 /* PB6 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1 /* PB7 */
/* SPI1 */
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_2 /* PB5 */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
/* Ethernet *************************************************************************/
#if defined(CONFIG_STM32_ETHMAC)
/* RMII interface to the LAN8710 PHY (works with LAN8720 driver)*/
# ifndef CONFIG_STM32_RMII
# error CONFIG_STM32_RMII must be defined
# endif
/* Clocking is provided by an external 50Mhz XTAL */
# ifndef CONFIG_STM32_RMII_EXTCLK
# error CONFIG_STM32_RMII_EXTCLK must be defined
# endif
/* Pin disambiguation */
# define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_1 /* PA3 */
# define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 /* PG13 */
# define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 /* PG14 */
# define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2 /* PG11 */
#endif
#endif /* __BOARDS_ARM_STM32_OLIMEX_STM32_E407_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink