nuttx/boards/arm/olimex-lpc2378/README.txt
Alin Jerpelea af28821c77 Merged in alinjerpelea/nuttx (pull request #966)
group boards by architecture

* z80: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: group boards by architecture

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 14:37:27 +00:00

12 lines
359 B
Plaintext

There's not much here:
EXT1 - P3 0:7 are used for LEDs.
UEXT pin 3/4 -TXD2/RXD2- is UART2.
The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.
I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.