Gregory Nutt 79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.

2017-04-22 11:10:30 -06:00

..

chip

SAM3/4: Add SMP support for the dual-core SAM4CM

2016-12-04 07:23:31 -06:00

chip.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

Kconfig

CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit

2017-01-31 11:52:00 -06:00

Make.defs

ELF: Move ARMv6-M, ARMv7-M, and legacy ARM versions of ELF relocation logic to libc/machine

2017-01-21 15:24:25 -06:00

sam3u_gpio.h

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

sam3u_periphclks.h

Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips

2014-02-22 10:38:25 -06:00

sam3x_gpio.h

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

sam3x_periphclks.h

SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte

2014-09-08 06:14:59 -06:00

sam4cm_cpuidlestack.c

SAM3/4: Add SMP support for the dual-core SAM4CM

2016-12-04 07:23:31 -06:00

sam4cm_cpuindex.c

SAM3/4: Add SMP support for the dual-core SAM4CM

2016-12-04 07:23:31 -06:00

sam4cm_cpupause.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam4cm_cpustart.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam4cm_freerun.c

SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.

2016-08-11 17:04:19 -06:00

sam4cm_freerun.h

SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized

2016-02-05 10:22:11 -06:00

sam4cm_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4cm_idle.c

SAM3/4: Add SMP support for the dual-core SAM4CM

2016-12-04 07:23:31 -06:00

sam4cm_oneshot_lowerhalf.c

Add a simulated oneshot lowerhalf driver

2016-08-12 13:14:03 -06:00

sam4cm_oneshot.c

SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.

2016-08-11 17:04:19 -06:00

sam4cm_oneshot.h

SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.

2016-08-11 17:04:19 -06:00

sam4cm_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_supc.c

Costmetic fixes to C coding style

2015-10-05 17:13:53 -06:00

sam4cm_supc.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_tc.c

Convert remaining serial drivers to use use irq_attach.

2017-02-27 10:27:14 -06:00

sam4cm_tc.h

Centralize definitions associated with CONFIG_DEBUG_TIMER

2016-06-16 07:16:25 -06:00

sam4cm_tickless.c

up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.

2017-02-07 10:35:04 -06:00

sam4e_gpio.h

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

sam4e_periphclks.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam4l_clockconfig.c

Standard some naming if code sectino comments

2016-02-21 18:06:09 -06:00

sam4l_gpio.c

Centralize definitions associated with CONFIG_DEBUG_GPIO

2016-06-15 09:20:23 -06:00

sam4l_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4l_periphclks.c

Standard some naming if code sectino comments

2016-02-21 18:06:09 -06:00

sam4l_periphclks.h

Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port

2013-06-26 18:46:44 -06:00

sam4s_gpio.h

SAM3/4: GPIO bit numbering typo fixes.

2017-02-26 09:54:04 -08:00

sam4s_periphclks.h

SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S

2014-11-16 06:43:08 -06:00

sam_aes.c

Correct some spacing issues

2015-10-07 11:39:06 -06:00

sam_aes.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_allocateheap.c

Rename board_led_on to board_autoled_on

2015-11-01 09:07:06 -06:00

sam_clockconfig.c

Correct some spacing issues

2015-10-07 11:39:06 -06:00

sam_clockconfig.h

Move SAM4L peripheral clock logic to a separate file

2013-06-05 18:48:30 -06:00

sam_cmcc.c

SAM4E CMCC: Fix some errors introducted in last check-in

2014-03-26 16:32:16 -06:00

sam_cmcc.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam_dmac.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_dmac.h

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 16:30:45 -06:00

sam_emac.c

net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.

2017-04-22 11:10:30 -06:00

sam_emac.h

SAM4E-EK: Add support for PHY insterrupt

2014-10-24 12:28:57 -06:00

sam_gpio.c

SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7

2016-09-20 15:33:31 -06:00

sam_gpio.h

Centralize definitions associated with CONFIG_DEBUG_GPIO

2016-06-15 09:20:23 -06:00

sam_gpioirq.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_hsmci.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_hsmci.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_irq.c

ARM: Remove redundant interrupt stack coloring

2017-03-16 19:13:39 +08:00

sam_lowputc.c

Remove CONFIG_USARTn_ISUART

2016-05-25 11:21:48 -06:00

sam_lowputc.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_mpuinit.c

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

sam_mpuinit.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam_rtc.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_rtc.h

RTC: Remove all backdoor interfaces from rtc.h

2015-02-13 08:41:34 -06:00

sam_rtt.c

Convert remaining serial drivers to use use irq_attach.

2017-02-27 10:27:14 -06:00

sam_rtt.h

Add SAM3/4 RTT driver. From Bob Doiron

2014-05-05 14:35:37 -06:00

sam_serial.c

Convert remaining serial drivers to use use irq_attach.

2017-02-27 10:27:14 -06:00

sam_spi.c

arch: Disable priority inheritance on all semaphores used for signaling in all SPI drivers

2016-11-03 14:51:44 -06:00

sam_spi.h

For LK MCUs, rename up_spiinitialize to kl_spibus_initialize

2016-01-26 16:19:03 -06:00

sam_start.c

SAM3/4: Add SMP support for the dual-core SAM4CM

2016-12-04 07:23:31 -06:00

sam_tc.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_tc.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00

sam_timerisr.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_twi.c

Adapt some drivers to utilize the IRQ argument feature.

2017-02-27 20:54:18 -06:00

sam_twi.h

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:08:23 -06:00

sam_udp.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_udp.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_userspace.c

Correct some spacing issues

2015-10-07 11:39:06 -06:00

sam_userspace.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_vectors.S

Update comments.

2017-03-14 08:44:56 -06:00

sam_wdt.c

More missing arguments to interrupt handling.

2017-02-27 14:26:04 -06:00

sam_wdt.h

SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.

2016-08-11 17:04:19 -06:00