sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7aa8039179
nuttx/configs/makerlisp/nsh
History
Gregory Nutt 7aa8039179 Squashed commit of the following: 
commit f5080f53516a853408dd80f09f85e1d1c139133f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 12:24:22 2019 -0600

    arch/z80/src/ez80/ez80_spi.c:  SPI driver still does not work.  But the driver now has timeouts so that at least it does not hang the system on startup.

commit 5241e9ae643981c43c8c7fa8478a01d0c2e17eb0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 10:45:11 2019 -0600

    arch/z80/src/ez80:  Fixes to SPI baud rate calculation.

commit ce2e9e3703485563a0a5b6a57e4080ad45d91fd7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:29:13 2019 -0600

    arch/z80/src/ez80:  Cosmetic and unnecessary clean-up or serial driver.

commit 77287c8508a7e3262068d3e8cf1c5f8e27f3a144
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:08:56 2019 -0600

    arch/z80/src/common and arch/z80/src/ez80:  Clean up some assertion-related logic.

commit 4d2d3594c22f7240119255825fce2d2437301404
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:48:21 2019 -0600

    configs/makerlisp/nsh/defconfig:  Enable STACKDUMP on assertion.

commit 76b7a2faa3f213dd26634dd9440d12f746cac097
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:47:55 2019 -0600

    configs/makerlisp/include/board.h:  Don't put the board in reset on a simple assertion, onlhy a full panic.

commit 0a0dc12edcd39c07696769cb7249d8c39a148ccc
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:46:54 2019 -0600

    arch/z80/src/ez80/ez80_rtc_lowerhalf.c:  Remove all references to alarm ID.

commit 1a4dba1075fcf6466e87520a8ba66bbf91d696d7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:33:29 2019 -0600

    configs/makerlisp/src/ez80_bringup.c:  Fix an error that was causing MMC/SD to fail to initialize.  Unfortunately now the system hangs.

commit 145a395c7a8e73336fe62caf803d108c59e306a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:32:50 2019 -0600

    arch/z80/src/ez80:  Add an RTC lower half driver.  Initial commit is just the STM32 RTC lower half with name changes.
2019-06-17 12:25:43 -06:00
..
.gitignore Add initial support for the MakerLisp eZ80 board. Ref: https://makerlisp.com/ 2019-06-04 11:12:17 -06:00
defconfig Squashed commit of the following: 2019-06-17 12:25:43 -06:00
nsh_flash.ztgt configs/makerlisp: With these changes, I am able to write the ez80 FLASH image using the ZDS-II IDE. 2019-06-16 09:12:46 -06:00
nsh_ram.ztgt configs/makerlisp: With these changes, I am able to write the ez80 FLASH image using the ZDS-II IDE. 2019-06-16 09:12:46 -06:00
nsh.zdsproj configs/makerlisp: With these changes, I am able to write the ez80 FLASH image using the ZDS-II IDE. 2019-06-16 09:12:46 -06:00
nsh.zfpproj configs/makerlisp: With these changes, I am able to write the ez80 FLASH image using the ZDS-II IDE. 2019-06-16 09:12:46 -06:00
README.txt configs/makerlisp: With these changes, I am able to write the ez80 FLASH image using the ZDS-II IDE. 2019-06-16 09:12:46 -06:00

README.txt 

README.txt
^^^^^^^^^^

nsh.zdsproj is a simple ZDS-II project that will allow you
  to use the ZDS-II debugger.
nsh.zfpproj is a simple project that will allow you to use the Smart Flash
  Programming.  NOTE:  As of this writing this project does not work, probably
  due to RAM configuration in the project.  Use ZDS-II instead as is described
  in the upper README.txt file
nsh_flash.ztgt is the target file that accompanies the project files.  This
  one is identical to configs/scripts/makerlisp_ram.ztgt.
nsh_ram.ztgt is the target file that accompanies the project files.  This
  one is identical to configs/scripts/makerlisp_flash.ztgt.