nuttx/boards/arm/stm32l4/stm32l476vg-disco/include/stm32l476vg-disco-clocking.h
Xiang Xiao 7a8cf7ff70 Indent the include statement by two spaces
follow the coding style

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-16 12:34:32 -03:00

384 lines
14 KiB
C

/****************************************************************************
* boards/arm/stm32l4/stm32l476vg-disco/include/stm32l476vg-disco-clocking.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32L4_STM32L476VG_DISCO_INCLUDE_STM32L476VG_DISCO_CLOCKING_H
#define __BOARDS_ARM_STM32L4_STM32L476VG_DISCO_INCLUDE_STM32L476VG_DISCO_CLOCKING_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The stm32l476vg-disco supports both HSE and LSE crystals.
* As shipped, the HSE crystal is not populated.
* Therefore the stm32l476vg-disco will need to run off the 16MHz HSI clock,
* or the 32khz-synced MSI, unless you install the HSE xtal.
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* MSI - variable up to 48 MHz, synchronized to LSE
* HSE - not installed
* LSE - 32.768 kHz installed
*/
#define STM32L4_HSI_FREQUENCY 16000000ul
#define STM32L4_LSI_FREQUENCY 32000
#define STM32L4_LSE_FREQUENCY 32768
#define BOARD_AHB_FREQUENCY 80000000ul
/* XXX there needs to be independent selections for the System Clock Mux and
* the PLL Source Mux; currently System Clock Mux always is PLL, and PLL
* Source Mux is chosen by the following define. This is probably OK in many
* cases, but should be separated to support other power configurations.
*/
#if 0
# define HSI_CLOCK_CONFIG 1 /* HSI-16 clock configuration */
#elif 0
/* Make sure you actually installed one! */
# define HSE_CLOCK_CONFIG 1 /* HSE with 8 MHz xtal */
#else
# define MSI_CLOCK_CONFIG 1 /* MSI @ 4 MHz autotrimmed via LSE */
#endif
#if defined(HSI_CLOCK_CONFIG)
#define STM32L4_BOARD_USEHSI 1
/* Prescaler common to all PLL inputs; will be 1 (XXX source is implicitly
* as per comment above HSI)
*/
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
/* 'main' PLL config; we use this to generate our system clock via the R
* output. We set it up as 16 MHz / 1 * 10 / 2 = 80 MHz
*
* XXX NOTE: currently the main PLL is implicitly turned on and is implicitly
* the system clock; this should be configurable since not all applications
* may want things done this way.
*/
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(10)
#define STM32L4_PLLCFG_PLLP 0
#undef STM32L4_PLLCFG_PLLP_ENABLED
#define STM32L4_PLLCFG_PLLQ RCC_PLLCFG_PLLQ_2
#define STM32L4_PLLCFG_PLLQ_ENABLED
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
#define STM32L4_PLLCFG_PLLR_ENABLED
/* 'SAIPLL1' is used to generate the 48 MHz clock, since we can't
* do that with the main PLL's N value. We set N = 13, and enable
* the Q output (ultimately for CLK48) with /4. So,
* 16 MHz / 1 * 12 / 4 = 48 MHz
*
* XXX NOTE: currently the SAIPLL /must/ be explicitly selected in the
* menuconfig, or else all this is a moot point, and the various 48 MHz
* peripherals will not work (RNG at present). I would suggest removing
* that option from Kconfig altogether, and simply making it an option
* that is selected via a #define here, like all these other params.
*/
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12)
#define STM32L4_PLLSAI1CFG_PLLP 0
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_4
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
#define STM32L4_PLLSAI1CFG_PLLR 0
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
/* 'SAIPLL2' is not used in this application */
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
#define STM32L4_PLLSAI2CFG_PLLP 0
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
#define STM32L4_PLLSAI2CFG_PLLR 0
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
/* CLK48 will come from PLLSAI1 (implicitly Q) */
#define STM32L4_USE_CLK48 1
#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
/* Enable the LSE oscillator, used automatically trim the MSI, and for RTC */
#define STM32L4_USE_LSE 1
/* AHB clock (HCLK) is SYSCLK (80MHz) */
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
/* APB1 clock (PCLK1) is HCLK/1 (80MHz) */
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
/* The timer clock frequencies are automatically defined by hardware.
* If the APB prescaler equals 1, the timer clock frequencies are set to the
* same frequency as that of the APB domain. Otherwise they are set to twice.
*
* REVISIT : this can be configured
*/
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK (80MHz) */
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
/* The timer clock frequencies are automatically defined by hardware.
* If the APB prescaler equals 1, the timer clock frequencies are set to the
* same frequency as that of the APB domain. Otherwise they are set to twice.
*
* REVISIT : this can be configured
*/
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
#define STM32L4_APB2_TIM8_CLKIN (STM32L4_PCLK2_FREQUENCY)
#elif defined(HSE_CLOCK_CONFIG)
/* Use the HSE */
#define STM32L4_BOARD_USEHSE 1
/* XXX sysclk mux = pllclk */
/* XXX pll source mux = hse */
/* Prescaler common to all PLL inputs */
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
/* 'main' PLL config; we use this to generate our system clock */
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(20)
#define STM32L4_PLLCFG_PLLP 0
#undef STM32L4_PLLCFG_PLLP_ENABLED
#define STM32L4_PLLCFG_PLLQ 0
#undef STM32L4_PLLCFG_PLLQ_ENABLED
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
#define STM32L4_PLLCFG_PLLR_ENABLED
/* 'SAIPLL1' is used to generate the 48 MHz clock */
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12)
#define STM32L4_PLLSAI1CFG_PLLP 0
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
#define STM32L4_PLLSAI1CFG_PLLR 0
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
/* 'SAIPLL2' is not used in this application */
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
#define STM32L4_PLLSAI2CFG_PLLP 0
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
#define STM32L4_PLLSAI2CFG_PLLR 0
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
/* Enable CLK48; get it from PLLSAI1 */
#define STM32L4_USE_CLK48
#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
/* Enable LSE (for the RTC) */
#define STM32L4_USE_LSE 1
/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
/* Configure the APB1 prescaler */
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
/* Configure the APB2 prescaler */
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
#define STM32L4_APB2_TIM8_CLKIN (STM32L4_PCLK2_FREQUENCY)
#elif defined(MSI_CLOCK_CONFIG)
/* Use the MSI; frequ = 4 MHz; autotrim from LSE */
#define STM32L4_BOARD_USEMSI 1
#define STM32L4_BOARD_MSIRANGE RCC_CR_MSIRANGE_4M
/* XXX sysclk mux = pllclk */
/* XXX pll source mux = msi */
/* Prescaler common to all PLL inputs */
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
/* 'main' PLL config; we use this to generate our system clock */
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(40)
#define STM32L4_PLLCFG_PLLP 0
#undef STM32L4_PLLCFG_PLLP_ENABLED
#define STM32L4_PLLCFG_PLLQ 0
#undef STM32L4_PLLCFG_PLLQ_ENABLED
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
#define STM32L4_PLLCFG_PLLR_ENABLED
/* 'SAIPLL1' is used to generate the 48 MHz clock */
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(24)
#define STM32L4_PLLSAI1CFG_PLLP 0
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
#define STM32L4_PLLSAI1CFG_PLLR 0
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
/* 'SAIPLL2' is not used in this application */
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
#define STM32L4_PLLSAI2CFG_PLLP 0
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
#define STM32L4_PLLSAI2CFG_PLLR 0
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
/* Enable CLK48; get it from PLLSAI1 */
#define STM32L4_USE_CLK48
#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
/* Enable LSE (for the RTC) */
#define STM32L4_USE_LSE 1
/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
/* Configure the APB1 prescaler */
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
/* Configure the APB2 prescaler */
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
#define STM32L4_APB2_TIM8_CLKIN (STM32L4_PCLK2_FREQUENCY)
#endif
/* The timer clock frequencies are automatically defined by hardware.
* If the APB prescaler equals 1, the timer clock frequencies are set to
* the same frequency as that of the APB domain. Otherwise they are set to
* twice.
* Note: TIM1,8,15,16,17 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM3_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM4_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM5_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM6_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM7_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM8_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM15_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM16_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_TIM17_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_LPTIM1_FREQUENCY STM32L4_HCLK_FREQUENCY
#define BOARD_LPTIM2_FREQUENCY STM32L4_HCLK_FREQUENCY
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_STM32L4_STM32L476VG_DISCO_INCLUDE_STM32L476VG_DISCO_CLOCKING_H */