.. |
analog
|
Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface.
|
2016-01-29 07:41:23 -06:00 |
audio
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
binfmt
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
crypto
|
Add implementatino of Tiny Encryption Algorithm
|
2016-01-19 16:37:45 -06:00 |
eeprom
|
|
|
fs
|
I2C: Add an I2C character driver
|
2016-02-02 08:30:54 -06:00 |
i2c
|
Add a some missing FAR in shared header files
|
2016-03-09 18:12:41 -06:00 |
input
|
Fix trivial spacing problem in X11 keycode header file
|
2016-04-12 16:16:44 -06:00 |
ioexpander
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:36:47 -06:00 |
lcd
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:16:05 -06:00 |
leds
|
RGB LED driver
|
2016-02-22 08:43:32 -06:00 |
mm
|
Add procfs/kmm to show the state of the kernel heap
|
2016-02-06 11:35:30 -06:00 |
modem
|
drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy
|
2016-01-30 07:37:43 -06:00 |
mtd
|
MTD struct mtd_geometry_s: Increase the size of blocksize again. Yes, there are devices with block size greater than 64KB.
|
2016-03-09 07:42:34 -06:00 |
net
|
Separate out psock_listen() and psock_accept() for internal use by the OS
|
2016-04-14 08:39:48 -06:00 |
nx
|
Implement anti-aliasing in the NuttX graphics line drawing
|
2015-07-14 10:17:42 -06:00 |
power
|
PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains.
|
2016-03-27 13:03:47 -06:00 |
sensors
|
drivers/sensors/h1750fvi.c: Add a character driver for Rohm Ambient Light Sensor BH1750FVI.
|
2016-04-15 08:16:16 -06:00 |
sercomm
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
serial
|
Implement high level DMA infrastructure for serial devices
|
2015-11-12 14:16:19 -06:00 |
spi
|
drivers/wireless/ieee802154/Kconfig
|
2016-02-26 18:39:27 -06:00 |
syslog
|
Clean up and review of header files for conformance to standards
|
2015-06-12 18:07:47 -06:00 |
timers
|
RTC driver: A PID of zero should mean to notify the calling task
|
2016-04-10 09:12:50 -06:00 |
usb
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:45:15 -06:00 |
video
|
Framebuffer driver: Add a display number to each interface in order to support multiple displays
|
2016-04-14 12:23:15 -06:00 |
wireless
|
net/: Finish IEEE802154->6LOWPAN renaming; remove PF_IEEE804154; Move 6LoWPAN menu to inside Internet Protocol Menu
|
2016-02-27 07:26:20 -06:00 |
.gitignore
|
|
|
addrenv.h
|
|
|
arch.h
|
Correct some comments
|
2016-03-13 12:08:09 -06:00 |
ascii.h
|
ASCII: Improve some naming
|
2016-04-14 16:20:36 -06:00 |
board.h
|
Fix a few issues related to new USB device boardctl() commands
|
2016-03-25 14:23:27 -06:00 |
can.h
|
Update some comments
|
2016-01-18 16:27:46 -06:00 |
clock.h
|
Missing parentheses in MSEC2TICK macro can lead to incorrect conversions
|
2016-03-09 07:24:16 -06:00 |
compiler.h
|
Update compiler.h to support IAR compiler
|
2016-04-02 06:24:36 -06:00 |
configdata.h
|
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
|
2015-03-19 14:53:05 -06:00 |
float.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
init.h
|
Update submodule; Improve some comments
|
2016-02-05 10:23:39 -06:00 |
irq.h
|
Scheduler instrumentation: Fix some associated with monitoring critical sections
|
2016-03-21 17:08:07 -06:00 |
kmalloc.h
|
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
|
2016-02-16 19:33:22 -06:00 |
kthread.h
|
|
|
lib.h
|
|
|
math32.h
|
Add more 32-bit math operations; Update ChangeLog
|
2016-01-25 11:19:25 -06:00 |
math.h
|
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
|
2015-09-01 13:52:29 -04:00 |
mmcsd.h
|
Remove the final vestiges of up_spiinitialize()
|
2016-01-27 09:27:56 -06:00 |
module.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
mqueue.h
|
Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.
|
2016-04-11 11:14:18 -06:00 |
page.h
|
|
|
pgalloc.h
|
|
|
poff.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
progmem.h
|
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
|
2015-11-12 13:40:18 -06:00 |
pthread.h
|
Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().
|
2016-02-19 17:33:35 -06:00 |
pwm.h
|
PWM: Add support for multiple output channels per timer
|
2015-11-01 17:15:12 -05:00 |
regex.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
rwbuffer.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:48:24 -06:00 |
sched_note.h
|
Add task state to information recorded when a task is suspended
|
2016-03-21 15:24:15 -06:00 |
sched.h
|
sched/: Move location (and form) of context switch instrumentation.
|
2016-03-21 14:08:31 -06:00 |
scsi.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
sdio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
semaphore.h
|
Update some comments
|
2016-03-06 13:50:26 -06:00 |
signal.h
|
signals: Adds a very limited, minimal implementation for SIGEV_THREAD
|
2015-12-30 15:01:14 -06:00 |
spawn.h
|
|
|
spinlock.h
|
Fix a typo introduced in the last commit and a file that was missed in the last commit
|
2016-02-19 16:03:01 -06:00 |
stdarg.h
|
Some typos noted by David Sidrane
|
2015-02-23 11:49:02 -06:00 |
streams.h
|
Introduce support for Atmel toolchain in-flash strings
|
2016-01-05 10:29:29 -06:00 |
symtab.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
time.h
|
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
|
2015-04-08 06:56:43 -06:00 |
tls.h
|
TLS: Simplify
|
2016-03-11 07:17:32 -06:00 |
tree.h
|
|
|
userspace.h
|
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
|
2015-07-10 08:37:02 -06:00 |
vt100.h
|
|
|
wdog.h
|
The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).
|
2016-01-05 07:58:04 -06:00 |
wqueue.h
|
Update to use 64-bit timer when available
|
2016-01-21 11:54:26 -06:00 |