nuttx/net/sixlowpan/sixlowpan_hc1.c
Gregory Nutt 7f53e08917 Squashed commit of the following:
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 29 12:02:13 2017 -0600

    6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic.  Perform a major renaming to make room in the 6LoWPAN name space for packet radios.

commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 29 10:16:23 2017 -0600

    6LoWPAN PktRadio:  Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.

commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 29 07:30:08 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 29 07:26:48 2017 -0600

    Spirit:  Completes port of the spirit radio library to NuttX.

commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 17:42:51 2017 -0600

    Spirit:  Bring in a couple ore more radio interface functions.

commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 15:49:37 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 15:47:27 2017 -0600

    Spirit:  Bring in a couple ore more radio interface functions.

commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 14:20:14 2017 -0600

    Spirit:  Bring in more radio interface functions.

commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 12:01:43 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 12:00:31 2017 -0600

    Spirit: Brings in the last of the PktCommon interfaces.

commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 09:54:52 2017 -0600

    Spirit: Add a few more PktCommon interfaces.

commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 09:33:31 2017 -0600

    libc/termios:  Remember block comments before empty file sections.

commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date:   Fri Jul 28 09:31:00 2017 -0600

    tcdrain implementation based on a new term ioctl

commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date:   Fri Jul 28 09:19:04 2017 -0600

    We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.

    The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).

    The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.

commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 28 09:06:26 2017 -0600

    Spirit:  Bring in PktStack interfaces.

commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 18:05:02 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 18:03:56 2017 -0600

    Spirit Network Driver:  Add some hooks that will eventually support address filtering.

commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 17:13:21 2017 -0600

    Spirit: Add a PktStack header file.

commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 15:00:03 2017 -0600

    Spirit:  Bring in last of timer interfaces.

commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 11:57:01 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 11:46:31 2017 -0600

    Spirit:  Bring in last of QI interfaces.

commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 10:14:34 2017 -0600

    Spirit:  Add general interfaces.

commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Thu Jul 27 09:41:23 2017 -0600

    Spirit:  Bring in last of GPIO interfaces.

commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 17:09:19 2017 -0600

    Spirit: Add some missing configuration options: Add register -level debug options.

commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 15:36:20 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 15:19:56 2017 -0600

    Spirit:  Brings in last of PktBasic logic.

commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 11:55:50 2017 -0600

    Spirit:  Bring in AES and MBUS logic.

commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 09:22:03 2017 -0600

    Spirit:  Bring in remainder of calibration interfaces.

commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 08:44:32 2017 -0600

    Spirit:  Bring in DirectRF interfaces.

commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Wed Jul 26 07:46:19 2017 -0600

    Spirit: Add CSMA support.

commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 18:57:43 2017 -0600

    Spirit:  Add some initial TX logic to network driver.

commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 17:02:11 2017 -0600

    Spirit: Completes ports of spirit_management.* files

commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 15:15:04 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 15:13:54 2017 -0600

    Spirit:  Add a few more functions that will soon be needed for packet transmission.

commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 13:30:07 2017 -0600

    Spirit:  Finish off some initialization issues; Started some interrupt handling logic.

commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 09:35:52 2017 -0600

    Spirit:  Completes very basic radio initialization for network driver

commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Tue Jul 25 07:58:30 2017 -0600

    Spirit: Add more radio initialization logic... getting closer.

commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 19:15:33 2017 -0600

    Spirit: add some CSMA initialization logic

commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 16:47:11 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 16:44:19 2017 -0600

    Update some comments

commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 16:15:54 2017 -0600

    Spirit:  Rename drivers/wireless/spirit/src to lib.  Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers

commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 15:38:40 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 87b616414a79c01a71acea78f8258e05325c1996
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 15:37:27 2017 -0600

    Spirit radio driver is mutating into a standalone network driver.

commit 507798233868a661ae8adad3e3aa117075a7a146
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 13:32:08 2017 -0600

    Spirit: More radio initialization logic

commit 33af25704ce9ca83d576300d153cfe31cc6d2576
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 12:19:14 2017 -0600

    Spirit:  Beginning of radio initialization logic

commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jul 24 09:42:06 2017 -0600

    Spirit: More initialization logic.

commit 295d8e27824c0417fccea2344b30bb5c93ffbabe
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Jul 23 15:39:53 2017 -0600

    Spirit:  Add header file containing enumeration of commands.

commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Jul 23 11:33:50 2017 -0600

    Spirit:  Add GPIO initialization logic

commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sun Jul 23 10:07:25 2017 -0600

    Spirit:  Add interrupt control logic.

commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 19:06:52 2017 -0600

    Spirit: Yet a little more radio initialization logic.

commit 5895b979823e51ddde5ad52e6de66a8ad662e883
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 15:36:05 2017 -0600

    Spirit: A little more radio initialization logic.

commit 86311ab30aad386203c181c792847dd1d37f9a02
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 13:02:32 2017 -0600

    Spirit: A miniscule amount of radio initialization logic.

commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a
Merge: 90a7666655 f4e46b0da7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 10:56:30 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 90a766665534b05da0157dbc383cb06a98c86a79
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 10:52:52 2017 -0600

    Spirit1:  A few fixes for a clean build of initial configuration (not much there yet)

commit bbbf04c223230a52a7705a2161128265cfbaa480
Merge: 623d54a7f7 2319ea53a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 09:53:57 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 623d54a7f719e9032099f88f38203efee4b80722
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 09:43:52 2017 -0600

    b-l475e-iot01a: Add a configuration for testing sprit radio.

commit d309d73d9f4665f9d870eb03531f450043d9389d
Merge: 52c3ddfae6 d88dc9b2e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 09:02:06 2017 -0600

    Merge remote-tracking branch 'origin/master' into spirit

commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Jul 22 08:33:04 2017 -0600

    Spirit:  Add register definition header file.

commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 17:27:03 2017 -0600

    b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module.

commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 15:49:43 2017 -0600

    Spirit: Fixes to get skeleton IEEE 802.15.4 driver build.

commit ebc5a8387bb94f0cc3827533795f3e4a33207e67
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 15:16:29 2017 -0600

    Spirit1:  Add framework for IEEE 802.15.4 driver.  Does not yet build.

commit 52e195a7ae14ddb18bdd56258f4877381d2501ca
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 14:02:42 2017 -0600

    Spirit:  A little more SPI logic.

commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 11:19:06 2017 -0600

    Spirit: Build directories setup.  Some initial files added, mostly just to verify build.

commit 8273a381ac1f6bb081b292b5e73226185e9e634c
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Jul 21 08:34:04 2017 -0600

    USB composite:  Remove references to CDC/ACM and USB MSC from composite logic.  They are no longer coupled.
2017-07-29 13:42:26 -06:00

483 lines
17 KiB
C

/****************************************************************************
* net/sixlowpan/sixlowpan_hc1.c
*
* Copyright (C) 2017, Gregory Nutt, all rights reserved
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Derives from Contiki:
*
* Copyright (c) 2008, Swedish Institute of Computer Science.
* All rights reserved.
* Authors: Adam Dunkels <adam@sics.se>
* Nicolas Tsiftes <nvt@sics.se>
* Niclas Finne <nfi@sics.se>
* Mathilde Durvy <mdurvy@cisco.com>
* Julien Abeille <jabeille@cisco.com>
* Joakim Eriksson <joakime@sics.se>
* Joel Hoglund <joel@sics.se>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/net/netdev.h>
#include "sixlowpan/sixlowpan_internal.h"
#ifdef CONFIG_NET_6LOWPAN_COMPRESSION_HC1
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sixlowpan_uncompress_addr
*
* Description:
* Uncompress a link-local, MAC-based IPv6 address.
*
****************************************************************************/
static void sixlowpan_uncompress_addr(FAR const struct ieee802154_addr_s *addr,
FAR net_ipv6addr_t ipaddr)
{
if (addr->mode == IEEE802154_ADDRMODE_SHORT)
{
sixlowpan_ipfromsaddr(addr->saddr, ipaddr);
}
else
{
sixlowpan_ipfromeaddr(addr->eaddr, ipaddr);
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sixlowpan_compresshdr_hc1
*
* Description:
* Compress IP/UDP header using HC1 and HC_UDP
*
* This function is called by the 6lowpan code to create a compressed
* 6lowpan packet in the packetbuf buffer from a full IPv6 packet in the
* uip_buf buffer.
*
* If we can compress everything, we use HC1 dispatch, if not we use
* IPv6 dispatch. We can compress everything if:
*
* - IP version is
* - Flow label and traffic class are 0
* - Both src and dest ip addresses are link local
* - Both src and dest interface ID are recoverable from lower layer
* header
* - Next header is either ICMP, UDP or TCP
*
* Moreover, if next header is UDP, we try to compress it using HC_UDP.
* This is feasible is both ports are between F0B0 and F0B0 + 15
*
* Resulting header structure:
* - For ICMP, TCP, non compressed UDP\n
* HC1 encoding = 11111010 (UDP) 11111110 (TCP) 11111100 (ICMP)
* 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | LoWPAN HC1 Dsp | HC1 encoding | IPv6 Hop limit| L4 hdr + data|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | ...
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* - For compressed UDP
* HC1 encoding = 11111011, HC_UDP encoding = 11100000
* 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | LoWPAN HC1 Dsp| HC1 encoding | HC_UDP encod.| IPv6 Hop limit|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | src p.| dst p.| UDP checksum | L4 data...
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* Input Parmeters:
* radio - A reference to a radio network device instance
* ipv6 - The IPv6 header followd by TCP, UDP, or ICMPv6 header to be
* compressed
* destmac - L2 destination address, needed to compress the IP
* destination field
* fptr - Pointer to frame to be compressed.
*
* Returned Value:
* On success the indications of the defines COMPRESS_HDR_* are returned.
* A negated errno value is returned on failure.
*
****************************************************************************/
int sixlowpan_compresshdr_hc1(FAR struct sixlowpan_driver_s *radio,
FAR const struct ipv6_hdr_s *ipv6,
FAR const struct sixlowpan_tagaddr_s *destmac,
FAR uint8_t *fptr)
{
FAR uint8_t *hc1 = fptr + g_frame_hdrlen;
int ret = COMPRESS_HDR_INLINE;
/* Check if all the assumptions for full compression are valid */
if (ipv6->vtc != 0x60 || ipv6->tcf != 0 || ipv6->flow != 0 ||
!sixlowpan_islinklocal(ipv6->srcipaddr) ||
!sixlowpan_isaddrbased(ipv6->srcipaddr, &radio->r_dev.d_mac.ieee802154) ||
!sixlowpan_islinklocal(ipv6->destipaddr) ||
!sixlowpan_ismacbased(ipv6->destipaddr, destmac) ||
( 1
#ifdef CONFIG_NET_TCP
&& ipv6->proto != IP_PROTO_TCP
#endif
#ifdef CONFIG_NET_UDP
&& ipv6->proto != IP_PROTO_UDP
#endif
#ifdef CONFIG_NET_ICMPv6
&& ipv6->proto != IP_PROTO_ICMP6
#endif
))
{
/* IPV6 DISPATCH
* Something cannot be compressed, use IPV6 DISPATCH, compress
* nothing, copy IPv6 header into the frame buffer
*/
nwarn("WARNING: Fall back to IPv6 dispatch\n");
/* IPv6 dispatch header (1 byte) */
hc1[SIXLOWPAN_HC1_DISPATCH] = SIXLOWPAN_DISPATCH_IPV6;
g_frame_hdrlen += SIXLOWPAN_IPV6_HDR_LEN;
memcpy(fptr + g_frame_hdrlen, ipv6, IPv6_HDRLEN);
g_frame_hdrlen += IPv6_HDRLEN;
g_uncomp_hdrlen += IPv6_HDRLEN;
}
else
{
/* HC1 DISPATCH maximum compresssion:
* All fields in the IP header but Hop Limit are elided. If next
* header is UDP, we compress UDP header using HC2
*/
hc1[SIXLOWPAN_HC1_DISPATCH] = SIXLOWPAN_DISPATCH_HC1;
g_uncomp_hdrlen += IPv6_HDRLEN;
switch (ipv6->proto)
{
#ifdef CONFIG_NET_ICMPv6
case IP_PROTO_ICMP6:
{
/* HC1 encoding and ttl */
hc1[SIXLOWPAN_HC1_ENCODING] = 0xfc;
hc1[SIXLOWPAN_HC1_TTL] = ipv6->ttl;
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
}
break;
#endif
#ifdef CONFIG_NET_TCP
case IP_PROTO_TCP:
{
/* HC1 encoding and ttl */
hc1[SIXLOWPAN_HC1_ENCODING] = 0xfe;
hc1[SIXLOWPAN_HC1_TTL] = ipv6->ttl;
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
}
break;
#endif
#ifdef CONFIG_NET_UDP
case IP_PROTO_UDP:
{
FAR struct udp_hdr_s *udp =
&(((FAR struct ipv6udp_hdr_s *)ipv6)->udp);
/* Try to compress UDP header (we do only full compression).
* This is feasible if both src and dest ports are between
* CONFIG_NET_6LOWPAN_MINPORT and CONFIG_NET_6LOWPAN_MINPORT +
* 15
*/
ninfo("local/remote port %04x/%04x\n", udp->srcport, udp->destport);
if (ntohs(udp->srcport) >= CONFIG_NET_6LOWPAN_MINPORT &&
ntohs(udp->srcport) < (CONFIG_NET_6LOWPAN_MINPORT + 16) &&
ntohs(udp->destport) >= CONFIG_NET_6LOWPAN_MINPORT &&
ntohs(udp->destport) < (CONFIG_NET_6LOWPAN_MINPORT + 16))
{
FAR uint8_t *hcudp = fptr + g_frame_hdrlen;
/* HC1 encoding */
hcudp[SIXLOWPAN_HC1_HC_UDP_HC1_ENCODING] = 0xfb;
/* HC_UDP encoding, ttl, src and dest ports, checksum */
hcudp[SIXLOWPAN_HC1_HC_UDP_UDP_ENCODING] = 0xe0;
hcudp[SIXLOWPAN_HC1_HC_UDP_TTL] = ipv6->ttl;
hcudp[SIXLOWPAN_HC1_HC_UDP_PORTS] =
(uint8_t)((ntohs(udp->srcport) - CONFIG_NET_6LOWPAN_MINPORT) << 4) +
(uint8_t)((ntohs(udp->destport) - CONFIG_NET_6LOWPAN_MINPORT));
memcpy(&hcudp[SIXLOWPAN_HC1_HC_UDP_CHKSUM], &udp->udpchksum, 2);
g_frame_hdrlen += SIXLOWPAN_HC1_HC_UDP_HDR_LEN;
g_uncomp_hdrlen += UDP_HDRLEN;
}
else
{
/* HC1 encoding and ttl */
hc1[SIXLOWPAN_HC1_ENCODING] = 0xfa;
hc1[SIXLOWPAN_HC1_TTL] = ipv6->ttl;
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
}
ret = COMPRESS_HDR_ELIDED;
}
break;
#endif /* CONFIG_NET_UDP */
default:
{
/* Test above assures that this will never happen */
nerr("ERROR: Unhandled protocol\n");
DEBUGPANIC();
}
break;
}
}
return ret;
}
/****************************************************************************
* Name: sixlowpan_uncompresshdr_hc1
*
* Description:
* Uncompress HC1 (and HC_UDP) headers and put them in sixlowpan_buf
*
* This function is called by the input function when the dispatch is
* HC1. It processes the frame in the IOB buffer, uncompresses the
* header fields, and copies the result in the packet buffer. At the
* end of the decompression, g_frame_hdrlen and uncompressed_hdr_len
* are set to the appropriate values
*
* Input Parameters:
* ind - MAC header meta data including node addressing information.
* iplen - Equal to 0 if the packet is not a fragment (IP length is then
* inferred from the L2 length), non 0 if the packet is a 1st
* fragment.
* iob - Pointer to the IOB containing the received frame.
* fptr - Pointer to frame to be uncompressed.
* bptr - Output goes here. Normally this is a known offset into d_buf,
* may be redirected to a "bitbucket" on the case of FRAGN frames.
*
* Returned Value:
* Zero (OK) is returned on success, on failure a negater errno value is
* returned.
*
****************************************************************************/
int sixlowpan_uncompresshdr_hc1(FAR const struct ieee802154_data_ind_s *ind,
uint16_t iplen, FAR struct iob_s *iob,
FAR uint8_t *fptr, FAR uint8_t *bptr)
{
FAR struct ipv6_hdr_s *ipv6 = (FAR struct ipv6_hdr_s *)bptr;
FAR uint8_t *hc1 = fptr + g_frame_hdrlen;
ninfo("fptr=%p g_frame_hdrlen=%u\n", fptr, g_frame_hdrlen);
/* Format the IPv6 header in the device d_buf */
/* Set version, traffic clase, and flow label. This assumes that Bit 4 is
* set in HC1.
*/
ipv6->vtc = 0x60; /* Bits 0-3: version, bits 4-7: traffic class (MS) */
ipv6->tcf = 0; /* Bits 0-3: traffic class (LS), 4-bits: flow label (MS) */
ipv6->flow = 0; /* 16-bit flow label (LS) */
g_uncomp_hdrlen += IPv6_HDRLEN;
/* len[], proto, and ttl depend on the encoding */
switch (hc1[SIXLOWPAN_HC1_ENCODING] & 0x06)
{
#ifdef CONFIG_NET_ICMPv6
case SIXLOWPAN_HC1_NH_ICMPv6:
ipv6->proto = IP_PROTO_ICMP6;
ipv6->ttl = hc1[SIXLOWPAN_HC1_TTL];
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
break;
#endif
#ifdef CONFIG_NET_TCP
case SIXLOWPAN_HC1_NH_TCP:
ipv6->proto = IP_PROTO_TCP;
ipv6->ttl = hc1[SIXLOWPAN_HC1_TTL];
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
break;
#endif
#ifdef CONFIG_NET_UDP
case SIXLOWPAN_HC1_NH_UDP:
{
FAR struct udp_hdr_s *udp = (FAR struct udp_hdr_s *)(bptr + IPv6_HDRLEN);
FAR uint8_t *hcudp = fptr + g_frame_hdrlen;
ipv6->proto = IP_PROTO_UDP;
/* Check for HC_UDP encoding */
if ((hcudp[SIXLOWPAN_HC1_HC_UDP_HC1_ENCODING] & 0x01) != 0)
{
/* UDP header is compressed with HC_UDP */
if (hcudp[SIXLOWPAN_HC1_HC_UDP_UDP_ENCODING] !=
SIXLOWPAN_HC_UDP_ALL_C)
{
nwarn("WARNING: sixlowpan (uncompress_hdr), packet not supported");
return -EOPNOTSUPP;
}
/* IP TTL */
ipv6->ttl = hcudp[SIXLOWPAN_HC1_HC_UDP_TTL];
/* UDP ports, len, checksum */
udp->srcport =
htons(CONFIG_NET_6LOWPAN_MINPORT + (hcudp[SIXLOWPAN_HC1_HC_UDP_PORTS] >> 4));
udp->destport =
htons(CONFIG_NET_6LOWPAN_MINPORT + (hcudp[SIXLOWPAN_HC1_HC_UDP_PORTS] & 0x0F));
ninfo("UDP srcport=%04x destport=%04x\n", udp->srcport, udp->destport);
memcpy(&udp->udpchksum, &hcudp[SIXLOWPAN_HC1_HC_UDP_CHKSUM], 2);
g_uncomp_hdrlen += UDP_HDRLEN;
g_frame_hdrlen += SIXLOWPAN_HC1_HC_UDP_HDR_LEN;
}
else
{
g_frame_hdrlen += SIXLOWPAN_HC1_HDR_LEN;
}
}
break;
#endif /* CONFIG_NET_UDP */
default:
return -EPROTONOSUPPORT;
}
/* Re-create the link-local, mac-based IP address from src/dest node
* addresses.
*
* PC: Prefix compressed (link-local prefix assumed)
* IC: Interface identifier elided (derivable from the corresponding
* link-layer address).
*/
if ((hc1[SIXLOWPAN_HC1_ENCODING] & SIXLOWPAN_HC1_SRCADDR_MASK) ==
SIXLOWPAN_HC1_SRCADDR_PCIC)
{
sixlowpan_uncompress_addr(&ind->src, ipv6->srcipaddr);
}
else
{
nwarn("HC1 srcipaddr encoding not supported: %02x\n",
hc1[SIXLOWPAN_HC1_ENCODING]);
}
ninfo("srcipaddr=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
ipv6->srcipaddr[0], ipv6->srcipaddr[1], ipv6->srcipaddr[2],
ipv6->srcipaddr[3], ipv6->srcipaddr[4], ipv6->srcipaddr[5],
ipv6->srcipaddr[6], ipv6->srcipaddr[7]);
if ((hc1[SIXLOWPAN_HC1_ENCODING] & SIXLOWPAN_HC1_DESTADDR_MASK) ==
SIXLOWPAN_HC1_DESTADDR_PCIC)
{
sixlowpan_uncompress_addr(&ind->dest, ipv6->destipaddr);
}
else
{
nwarn("HC1 destipaddr encoding not supported: %02x\n",
hc1[SIXLOWPAN_HC1_ENCODING]);
}
ninfo("destipaddr=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
ipv6->destipaddr[0], ipv6->destipaddr[1], ipv6->destipaddr[2],
ipv6->destipaddr[3], ipv6->destipaddr[4], ipv6->destipaddr[5],
ipv6->destipaddr[6], ipv6->destipaddr[7]);
/* IP length field. */
if (iplen == 0)
{
/* This is not a fragmented packet */
ipv6->len[0] = 0;
ipv6->len[1] = iob->io_len - g_frame_hdrlen + g_uncomp_hdrlen -
IPv6_HDRLEN;
}
else
{
/* This is a 1st fragment */
ipv6->len[0] = (iplen - IPv6_HDRLEN) >> 8;
ipv6->len[1] = (iplen - IPv6_HDRLEN) & 0x00FF;
}
ninfo("IPv6 len=%02x:%02x\n", ipv6->len[0], ipv6->len[1]);
#ifdef CONFIG_NET_UDP
/* Length field in UDP header */
if (ipv6->proto == IP_PROTO_UDP)
{
FAR struct udp_hdr_s *udp = (FAR struct udp_hdr_s *)(bptr + IPv6_HDRLEN);
memcpy(&udp->udplen, &ipv6->len[0], 2);
ninfo("IPv6 len=%04x\n", udp->udplen);
}
#endif
return OK;
}
#endif /* CONFIG_NET_6LOWPAN_COMPRESSION_HC1 */