RNDIS support on STM32F4Discovery * stm32f4discovery: Add stm32_netinit.c to avoid a compilation error * stm32f4discovery: Add rndis initialization in stm32_bringup.c NOTE: MAC address for the host side starts 0xaa. This assignment scheme should be fixed later. * stm32f4discovery: Add rndis configuration NOTE: STM32F4Discovery + DM-STF4BB * drivers/usbdev/rndis.c: Fix some issues in rndis.c Introduce rndis_transmit() and change rndis_rxdispatch() to avoid packet corruption. Introduce max packet size for dual speed which is mainly used for high speed mode. Fix adjusting MTU warning on Linux host. Fix data corruption if a packet size excceds MTU. NOTE: Max packet size is not configured dynamically. This should be fixed in the future version. * stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup() * drivers/usbdev/rndis.c: Change HPWORK to ETHWORK * drivers/usbdev/rndis.c: Merge the commit 07b98ccbb5 Previous commit b09365784a was based on old rndis.c thus resulted in reverting the commit 07b98ccbb5. This change merges the commit. NOTE: In the commit 07b98ccbb5, max packet size of bulkout was assumed to be 64. In this commit, priv->epbulkout->maxpacket is used instead. Approved-by: Gregory Nutt <gnutt@nuttx.org>
178 lines
4.0 KiB
Makefile
178 lines
4.0 KiB
Makefile
############################################################################
|
|
# configs/stm32f4discovery/src/Makefile
|
|
#
|
|
# Copyright (C) 2011-2013, 2015-2016 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
|
|
-include $(TOPDIR)/Make.defs
|
|
|
|
ASRCS =
|
|
CSRCS = stm32_boot.c stm32_bringup.c stm32_spi.c
|
|
|
|
ifeq ($(CONFIG_ARCH_LEDS),y)
|
|
CSRCS += stm32_autoleds.c
|
|
else
|
|
CSRCS += stm32_userleds.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_AUDIO_CS43L22),y)
|
|
CSRCS += stm32_cs43l22.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
|
CSRCS += stm32_buttons.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CAN),y)
|
|
CSRCS += stm32_can.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32_OTGFS),y)
|
|
CSRCS += stm32_usb.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BH1750FVI),y)
|
|
CSRCS += stm32_bh1750fvi.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_BMP180),y)
|
|
CSRCS += stm32_bmp180.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MAX31855),y)
|
|
CSRCS += stm32_max31855.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32F4DISCO_LIS3DSH),y)
|
|
CSRCS += stm32_lis3dsh.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_MAX6675),y)
|
|
CSRCS += stm32_max6675.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_PCA9635PW),y)
|
|
CSRCS += stm32_pca9635.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32_SDIO),y)
|
|
CSRCS += stm32_sdio.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32_ETHMAC),y)
|
|
CSRCS += stm32_ethernet.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_RGBLED),y)
|
|
CSRCS += stm32_rgbled.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_PWM),y)
|
|
CSRCS += stm32_pwm.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_QENCODER),y)
|
|
CSRCS += stm32_qencoder.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_XEN1210),y)
|
|
CSRCS += stm32_xen1210.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NSH_LIBRARY),y)
|
|
CSRCS += stm32_appinit.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_CUSTOM_PMINIT),y)
|
|
CSRCS += stm32_pm.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_PM_BUTTONS),y)
|
|
CSRCS += stm32_pmbuttons.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SENSORS_ZEROCROSS),y)
|
|
CSRCS += stm32_zerocross.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_IDLE_CUSTOM),y)
|
|
CSRCS += stm32_idle.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32_FSMC),y)
|
|
CSRCS += stm32_extmem.c
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1289),y)
|
|
CSRCS += stm32_ssd1289.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1351),y)
|
|
CSRCS += stm32_ssd1351.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
|
|
CSRCS += stm32_ug2864ambag01.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_UG2864HSWEG01),y)
|
|
CSRCS += stm32_ug2864hsweg01.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_EXAMPLES_OSTEST),y)
|
|
CSRCS += stm32_ostest.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_TIMER),y)
|
|
CSRCS += stm32_timer.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_STM32_ROMFS),y)
|
|
CSRCS += stm32_romfs_initialize.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_BOARDCTL_UNIQUEID),y)
|
|
CSRCS += stm32_uid.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_USBMSC),y)
|
|
CSRCS += stm32_usbmsc.c
|
|
endif
|
|
|
|
ifneq ($(CONFIG_STM32_ETHMAC),y)
|
|
ifeq ($(CONFIG_NETDEVICES),y)
|
|
CSRCS += stm32_netinit.c
|
|
endif
|
|
endif
|
|
|
|
include $(TOPDIR)/configs/Board.mk
|