sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8042de1145
nuttx/drivers/input/cypress_mbr3108.c
Alin Jerpelea 643d6153f2 drivers: Haltian Ltd: update licenses to Apache 
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
Hexagon AB has submitted the SGA
as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-11-15 06:49:32 -06:00

1156 lines
30 KiB
C
Raw Blame History

/****************************************************************************
* drivers/input/cypress_mbr3108.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include <poll.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/input/cypress_mbr3108.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
#ifdef CONFIG_INPUT_CYPRESS_MBR3108_DEBUG
# define mbr3108_dbg(x, ...) _info(x, ##__VA_ARGS__)
#else
# define mbr3108_dbg(x, ...) iinfo(x, ##__VA_ARGS__)
#endif
/* Register macros */
#define MBR3108_SENSOR_EN 0x0
#define MBR3108_FSS_EN 0x02
#define MBR3108_TOGGLE_EN 0x04
#define MBR3108_LED_ON_EN 0x06
#define MBR3108_SENSITIVITY0 0x08
#define MBR3108_SENSITIVITY1 0x09
#define MBR3108_BASE_THRESHOLD0 0x0c
#define MBR3108_BASE_THRESHOLD1 0x0d
#define MBR3108_FINGER_THRESHOLD2 0x0e
#define MBR3108_FINGER_THRESHOLD3 0x0f
#define MBR3108_FINGER_THRESHOLD4 0x10
#define MBR3108_FINGER_THRESHOLD5 0x11
#define MBR3108_FINGER_THRESHOLD6 0x12
#define MBR3108_FINGER_THRESHOLD7 0x13
#define MBR3108_SENSOR_DEBOUNCE 0x1c
#define MBR3108_BUTTON_HYS 0x1d
#define MBR3108_BUTTON_LBR 0x1f
#define MBR3108_BUTTON_NNT 0x20
#define MBR3108_BUTTON_NT 0x21
#define MBR3108_PROX_EN 0x26
#define MBR3108_PROX_CFG 0x27
#define MBR3108_PROX_CFG2 0x28
#define MBR3108_PROX_TOUCH_TH0 0x2a
#define MBR3108_PROX_TOUCH_TH1 0x2c
#define MBR3108_PROX_RESOLUTION0 0x2e
#define MBR3108_PROX_RESOLUTION1 0x2f
#define MBR3108_PROX_HYS 0x30
#define MBR3108_PROX_LBR 0x32
#define MBR3108_PROX_NNT 0x33
#define MBR3108_PROX_NT 0x34
#define MBR3108_PROX_POSITIVE_TH0 0x35
#define MBR3108_PROX_POSITIVE_TH1 0x36
#define MBR3108_PROX_NEGATIVE_TH0 0x39
#define MBR3108_PROX_NEGATIVE_TH1 0x3a
#define MBR3108_LED_ON_TIME 0x3d
#define MBR3108_BUZZER_CFG 0x3e
#define MBR3108_BUZZER_ON_TIME 0x3f
#define MBR3108_GPO_CFG 0x40
#define MBR3108_PWM_DUTYCYCLE_CFG0 0x41
#define MBR3108_PWM_DUTYCYCLE_CFG1 0x42
#define MBR3108_PWM_DUTYCYCLE_CFG2 0x43
#define MBR3108_PWM_DUTYCYCLE_CFG3 0x44
#define MBR3108_SPO_CFG 0x4c
#define MBR3108_DEVICE_CFG0 0x4d
#define MBR3108_DEVICE_CFG1 0x4e
#define MBR3108_DEVICE_CFG2 0x4f
#define MBR3108_DEVICE_CFG3 0x50
#define MBR3108_I2C_ADDR 0x51
#define MBR3108_REFRESH_CTRL 0x52
#define MBR3108_STATE_TIMEOUT 0x55
#define MBR3108_CONFIG_CRC 0x7e
#define MBR3108_GPO_OUTPUT_STATE 0x80
#define MBR3108_SENSOR_ID 0x82
#define MBR3108_CTRL_CMD 0x86
#define MBR3108_CTRL_CMD_STATUS 0x88
#define MBR3108_CTRL_CMD_ERR 0x89
#define MBR3108_SYSTEM_STATUS 0x8a
#define MBR3108_PREV_CTRL_CMD_CODE 0x8c
#define MBR3108_FAMILY_ID 0x8f
#define MBR3108_DEVICE_ID 0x90
#define MBR3108_DEVICE_REV 0x92
#define MBR3108_CALC_CRC 0x94
#define MBR3108_TOTAL_WORKING_SNS 0x97
#define MBR3108_SNS_CP_HIGH 0x98
#define MBR3108_SNS_VDD_SHORT 0x9a
#define MBR3108_SNS_GND_SHORT 0x9c
#define MBR3108_SNS_SNS_SHORT 0x9e
#define MBR3108_CMOD_SHIELD_TEST 0xa0
#define MBR3108_BUTTON_STAT 0xaa
#define MBR3108_LATCHED_BUTTON_STAT 0xac
#define MBR3108_PROX_STAT 0xae
#define MBR3108_LATCHED_PROX_STAT 0xaf
#define MBR3108_SYNC_COUNTER0 0xb9
#define MBR3108_DIFFERENCE_COUNT_SENSOR0 0xba
#define MBR3108_DIFFERENCE_COUNT_SENSOR1 0xbc
#define MBR3108_DIFFERENCE_COUNT_SENSOR2 0xbe
#define MBR3108_DIFFERENCE_COUNT_SENSOR3 0xc0
#define MBR3108_DIFFERENCE_COUNT_SENSOR4 0xc2
#define MBR3108_DIFFERENCE_COUNT_SENSOR5 0xc4
#define MBR3108_DIFFERENCE_COUNT_SENSOR6 0xc6
#define MBR3108_DIFFERENCE_COUNT_SENSOR7 0xc8
#define MBR3108_GPO_DATA 0xda
#define MBR3108_SYNC_COUNTER1 0xdb
#define MBR3108_DEBUG_SENSOR_ID 0xdc
#define MBR3108_DEBUG_CP 0xdd
#define MBR3108_DEBUG_DIFFERENCE_COUNT0 0xde
#define MBR3108_DEBUG_BASELINE0 0xe0
#define MBR3108_DEBUG_RAW_COUNT0 0xe2
#define MBR3108_DEBUG_AVG_RAW_COUNT0 0xe4
#define MBR3108_SYNC_COUNTER2 0xe7
/* Device commands for MBR3108_CTRL_CMD */
#define MBR3108_CMD_COMPLETED 0
#define MBR3108_CMD_CHECK_CONFIG_CRC 2
#define MBR3108_CMD_SET_CONFIG_CRC 3
#define MBR3108_CMD_ENTER_LOW_POWER_MODE 7
#define MBR3108_CMD_CLEAR_LATCHED 8
#define MBR3108_CMD_RESET_ADV_LOWPASS_FILTER_PROX_SENS_0 9
#define MBR3108_CMD_RESET_ADV_LOWPASS_FILTER_PROX_SENS_1 10
#define MBR3108_CMD_SOFTWARE_RESET 255
#define MBR3108_CMD_STATUS_SUCCESS 0
#define MBR3108_CMD_STATUS_ERROR 1
#define MBR3108_CMD_STATUS_MASK 1
/* Completion times for device commands */
#define MBR3108_CMD_MSECS_CHECK_CONFIG_CRC 280 /* >220 (typ.) */
#define MBR3108_CMD_MSECS_SOFTWARE_RESET 50
#define MBR3108_CMD_MSECS_CLEAR_LATCHED 50
/* Other macros */
#define MBR3108_I2C_RETRIES 10
#define MBR3108_NUM_SENSORS 8
#define MBR3108_EXPECTED_FAMILY_ID 0x9a
#define MBR3108_EXPECTED_DEVICE_ID 0x0a03
#define MBR3108_EXPECTED_DEVICE_REV 1
#define MBR3108_SYNC_RETRIES 10
#ifndef CONFIG_MBR3108_I2C_FREQUENCY
# define CONFIG_MBR3108_I2C_FREQUENCY 400000
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct mbr3108_dev_s
{
/* I2C bus and address for device. */
struct i2c_master_s *i2c;
uint8_t addr;
/* Configuration for device. */
struct mbr3108_board_s *board;
const struct mbr3108_sensor_conf_s *sensor_conf;
sem_t devsem;
uint8_t cref;
struct mbr3108_debug_conf_s debug_conf;
bool int_pending;
struct pollfd *fds[CONFIG_INPUT_CYPRESS_MBR3108_NPOLLWAITERS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int mbr3108_open(FAR struct file *filep);
static int mbr3108_close(FAR struct file *filep);
static ssize_t mbr3108_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t mbr3108_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int mbr3108_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_mbr3108_fileops =
{
mbr3108_open, /* open */
mbr3108_close, /* close */
mbr3108_read, /* read */
mbr3108_write, /* write */
NULL, /* seek */
NULL, /* ioctl */
mbr3108_poll /* poll */
};
/****************************************************************************
* Private Functions
****************************************************************************/
static int mbr3108_i2c_write(FAR struct mbr3108_dev_s *dev, uint8_t reg,
const uint8_t *buf, size_t buflen)
{
struct i2c_msg_s msgv[2] =
{
{
.frequency = CONFIG_MBR3108_I2C_FREQUENCY,
.addr = dev->addr,
.flags = 0,
.buffer = &reg,
.length = 1
},
{
.frequency = CONFIG_MBR3108_I2C_FREQUENCY,
.addr = dev->addr,
.flags = I2C_M_NOSTART,
.buffer = (void *)buf,
.length = buflen
}
};
int ret = -EIO;
int retries;
/* MBR3108 will respond with NACK to address when in low-power mode. Host
* needs to retry address selection multiple times to get MBR3108 to
* wake-up.
*/
for (retries = 0; retries < MBR3108_I2C_RETRIES; retries++)
{
ret = I2C_TRANSFER(dev->i2c, msgv, 2);
if (ret == -ENXIO)
{
/* -ENXIO is returned when getting NACK from response.
* Keep trying.
*/
continue;
}
if (ret >= 0)
{
/* Success! */
return 0;
}
}
/* Failed to read sensor. */
return ret;
}
static int mbr3108_i2c_read(FAR struct mbr3108_dev_s *dev, uint8_t reg,
uint8_t *buf, size_t buflen)
{
struct i2c_msg_s msgv[2] =
{
{
.frequency = CONFIG_MBR3108_I2C_FREQUENCY,
.addr = dev->addr,
.flags = 0,
.buffer = &reg,
.length = 1
},
{
.frequency = CONFIG_MBR3108_I2C_FREQUENCY,
.addr = dev->addr,
.flags = I2C_M_READ,
.buffer = buf,
.length = buflen
}
};
int ret = -EIO;
int retries;
/* MBR3108 will respond with NACK to address when in low-power mode. Host
* needs to retry address selection multiple times to get MBR3108 to
* wake-up.
*/
for (retries = 0; retries < MBR3108_I2C_RETRIES; retries++)
{
ret = I2C_TRANSFER(dev->i2c, msgv, 2);
if (ret == -ENXIO)
{
/* -ENXIO is returned when getting NACK from response.
* Keep trying.
*/
continue;
}
else if (ret >= 0)
{
/* Success! */
return 0;
}
else
{
/* Some other error. Try to reset I2C bus and keep trying. */
#ifdef CONFIG_I2C_RESET
if (retries == MBR3108_I2C_RETRIES - 1)
{
break;
}
ret = I2C_RESET(dev->i2c);
if (ret < 0)
{
mbr3108_dbg("I2C_RESET failed: %d\n", ret);
return ret;
}
#endif
}
}
/* Failed to read sensor. */
return ret;
}
static int mbr3108_check_cmd_status(FAR struct mbr3108_dev_s *dev)
{
const uint8_t start_reg = MBR3108_CTRL_CMD;
const uint8_t last_reg = MBR3108_CTRL_CMD_ERR;
uint8_t readbuf[MBR3108_CTRL_CMD_ERR - MBR3108_CTRL_CMD + 1];
uint8_t cmd;
uint8_t cmd_status;
uint8_t cmd_err;
int ret;
DEBUGASSERT(last_reg - start_reg + 1 == sizeof(readbuf));
/* Multi-byte read to get command status. */
ret = mbr3108_i2c_read(dev, start_reg, readbuf, sizeof(readbuf));
if (ret < 0)
{
mbr3108_dbg("cmd status get failed. ret=%d\n", ret);
return ret;
}
cmd = readbuf[MBR3108_CTRL_CMD - MBR3108_CTRL_CMD];
cmd_status = readbuf[MBR3108_CTRL_CMD_STATUS - MBR3108_CTRL_CMD];
cmd_err = readbuf[MBR3108_CTRL_CMD_ERR - MBR3108_CTRL_CMD];
mbr3108_dbg("cmd: %d, status: %d, err: %d\n", cmd, cmd_status, cmd_err);
if (cmd != MBR3108_CMD_COMPLETED)
{
return -EBUSY;
}
if ((cmd_status & MBR3108_CMD_STATUS_MASK) == MBR3108_CMD_STATUS_SUCCESS)
{
/* Success. */
return 0;
}
return cmd_err;
}
static int mbr3108_save_check_crc(FAR struct mbr3108_dev_s *dev)
{
uint8_t reg = MBR3108_CTRL_CMD;
uint8_t cmd = MBR3108_CMD_CHECK_CONFIG_CRC;
int ret;
ret = mbr3108_i2c_write(dev, reg, &cmd, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_CTRL_CMD:CHECK_CONFIG_CRC write failed.\n");
return ret;
}
nxsig_usleep(MBR3108_CMD_MSECS_CHECK_CONFIG_CRC * 1000);
ret = mbr3108_check_cmd_status(dev);
if (ret != 0)
{
return ret < 0 ? ret : -EIO;
}
return 0;
}
static int mbr3108_software_reset(FAR struct mbr3108_dev_s *dev)
{
uint8_t reg = MBR3108_CTRL_CMD;
uint8_t cmd = MBR3108_CMD_SOFTWARE_RESET;
int ret;
ret = mbr3108_i2c_write(dev, reg, &cmd, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_CTRL_CMD:SOFTWARE_RESET write failed.\n");
return ret;
}
nxsig_usleep(MBR3108_CMD_MSECS_SOFTWARE_RESET * 1000);
ret = mbr3108_check_cmd_status(dev);
if (ret != 0)
{
return ret < 0 ? ret : -EIO;
}
return 0;
}
static int mbr3108_enter_low_power_mode(FAR struct mbr3108_dev_s *dev)
{
uint8_t reg = MBR3108_CTRL_CMD;
uint8_t cmd = MBR3108_CMD_ENTER_LOW_POWER_MODE;
int ret;
ret = mbr3108_i2c_write(dev, reg, &cmd, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_CTRL_CMD:SOFTWARE_RESET write failed.\n");
return ret;
}
/* Device is now in low-power mode and not scanning. Further communication
* will cause wake-up and make chip resume scanning operations.
*/
return 0;
}
static int mbr3108_clear_latched(FAR struct mbr3108_dev_s *dev)
{
uint8_t reg = MBR3108_CTRL_CMD;
uint8_t cmd = MBR3108_CMD_CLEAR_LATCHED;
int ret;
ret = mbr3108_i2c_write(dev, reg, &cmd, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_CTRL_CMD: "
"MBR3108_CMD_CLEAR_LATCHED write failed.\n");
return ret;
}
nxsig_usleep(MBR3108_CMD_MSECS_CLEAR_LATCHED * 1000);
ret = mbr3108_check_cmd_status(dev);
if (ret != 0)
{
return ret < 0 ? ret : -EIO;
}
return 0;
}
static int mbr3108_debug_setup(FAR struct mbr3108_dev_s *dev,
FAR const struct mbr3108_debug_conf_s *conf)
{
uint8_t reg = MBR3108_SENSOR_ID;
int ret;
/* Store new debug configuration. */
dev->debug_conf = *conf;
if (!conf->debug_mode)
{
return 0;
}
/* Setup debug sensor id. */
ret = mbr3108_i2c_write(dev, reg, &conf->debug_sensor_id, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_SENSOR_ID write failed.\n");
dev->debug_conf.debug_mode = false;
}
return ret;
}
static int
mbr3108_device_configuration(FAR struct mbr3108_dev_s *dev,
FAR const struct mbr3108_sensor_conf_s *conf)
{
const uint8_t start_reg = MBR3108_SENSOR_EN;
const uint8_t last_reg = MBR3108_CONFIG_CRC + 1;
uint8_t value;
int ret = 0;
DEBUGASSERT(sizeof(conf->conf_data) == last_reg - start_reg + 1);
ret = mbr3108_i2c_read(dev, MBR3108_CTRL_CMD, &value, 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108_CTRL_CMD read failed.\n");
return ret;
}
if (value != MBR3108_CMD_COMPLETED)
{
/* Device is busy processing previous command. */
return -EBUSY;
}
ret = mbr3108_i2c_write(dev, start_reg, conf->conf_data,
last_reg - start_reg + 1);
if (ret < 0)
{
mbr3108_dbg("MBR3108 configuration write failed.\n");
return ret;
}
ret = mbr3108_save_check_crc(dev);
if (ret < 0)
{
mbr3108_dbg("MBR3108 save check CRC failed. ret=%d\n", ret);
return ret;
}
ret = mbr3108_software_reset(dev);
if (ret < 0)
{
mbr3108_dbg("MBR3108 software reset failed.\n");
return ret;
}
dev->board->irq_enable(dev->board, true);
return 0;
}
static int mbr3108_get_sensor_status(FAR struct mbr3108_dev_s *dev,
FAR void *buf)
{
struct mbr3108_sensor_status_s status =
{
};
const uint8_t start_reg = MBR3108_BUTTON_STAT;
const uint8_t last_reg = MBR3108_LATCHED_PROX_STAT;
uint8_t readbuf[MBR3108_LATCHED_PROX_STAT - MBR3108_BUTTON_STAT + 1];
int ret;
DEBUGASSERT(last_reg - start_reg + 1 == sizeof(readbuf));
/* Attempt to sensor status registers. */
ret = mbr3108_i2c_read(dev, start_reg, readbuf, sizeof(readbuf));
if (ret < 0)
{
mbr3108_dbg("Sensor status read failed.\n");
return ret;
}
status.button =
(readbuf[MBR3108_BUTTON_STAT + 0 - start_reg]) |
(readbuf[MBR3108_BUTTON_STAT + 1 - start_reg] << 8);
status.proximity =
readbuf[MBR3108_PROX_STAT - start_reg];
status.latched_button =
(readbuf[MBR3108_LATCHED_BUTTON_STAT + 0 - start_reg]) |
(readbuf[MBR3108_LATCHED_BUTTON_STAT + 1 - start_reg] << 8);
status.latched_proximity =
readbuf[MBR3108_LATCHED_PROX_STAT - start_reg];
memcpy(buf, &status, sizeof(status));
mbr3108_dbg("but: %x, prox: %x; latched[btn: %x, prox: %x]\n",
status.button, status.proximity, status.latched_button,
status.latched_button);
return 0;
}
static int mbr3108_get_sensor_debug_data(FAR struct mbr3108_dev_s *dev,
FAR void *buf)
{
struct mbr3108_sensor_debug_s data =
{
};
const uint8_t start_reg = MBR3108_SYNC_COUNTER1;
const uint8_t last_reg = MBR3108_SYNC_COUNTER2;
uint8_t readbuf[MBR3108_SYNC_COUNTER2 - MBR3108_SYNC_COUNTER1 + 1];
uint8_t sync1;
uint8_t sync2;
int ret;
int retries;
DEBUGASSERT(last_reg - start_reg + 1 == sizeof(readbuf));
for (retries = MBR3108_SYNC_RETRIES; retries > 0; retries--)
{
ret = mbr3108_i2c_read(dev, start_reg, readbuf, sizeof(readbuf));
if (ret < 0)
{
mbr3108_dbg("Sensor debug data read failed.\n");
return ret;
}
/* Sync counters need to match. */
sync1 = readbuf[MBR3108_SYNC_COUNTER1 - start_reg];
sync2 = readbuf[MBR3108_SYNC_COUNTER2 - start_reg];
if (sync1 == sync2)
{
break;
}
}
if (retries == 0)
{
return -EIO;
}
data.sensor_average_counts =
(readbuf[MBR3108_DEBUG_AVG_RAW_COUNT0 + 0 - start_reg]) |
(readbuf[MBR3108_DEBUG_AVG_RAW_COUNT0 + 1 - start_reg] << 8);
data.sensor_baseline =
(readbuf[MBR3108_DEBUG_BASELINE0 + 0 - start_reg]) |
(readbuf[MBR3108_DEBUG_BASELINE0 + 1 - start_reg] << 8);
data.sensor_diff_counts =
(readbuf[MBR3108_DEBUG_DIFFERENCE_COUNT0 + 0 - start_reg]) |
(readbuf[MBR3108_DEBUG_DIFFERENCE_COUNT0 + 1 - start_reg] << 8);
data.sensor_raw_counts =
(readbuf[MBR3108_DEBUG_RAW_COUNT0 + 0 - start_reg]) |
(readbuf[MBR3108_DEBUG_RAW_COUNT0 + 1 - start_reg] << 8);
data.sensor_total_capacitance = readbuf[MBR3108_DEBUG_CP - start_reg];
memcpy(buf, &data, sizeof(data));
mbr3108_dbg("avg_cnt: %d, baseline: %d, diff_cnt: %d, raw_cnt: %d, "
"total_cp: %d\n",
data.sensor_average_counts, data.sensor_baseline,
data.sensor_diff_counts, data.sensor_raw_counts,
data.sensor_total_capacitance);
return 0;
}
static int mbr3108_probe_device(FAR struct mbr3108_dev_s *dev)
{
const uint8_t start_reg = MBR3108_FAMILY_ID;
const uint8_t last_reg = MBR3108_DEVICE_REV;
uint8_t readbuf[MBR3108_DEVICE_REV - MBR3108_FAMILY_ID + 1];
uint8_t fam_id;
uint16_t dev_id;
uint8_t dev_rev;
int ret;
DEBUGASSERT(last_reg - start_reg + 1 == sizeof(readbuf));
/* Attempt to read device identification registers with multi-byte
* read.
*/
ret = mbr3108_i2c_read(dev, start_reg, readbuf, sizeof(readbuf));
if (ret < 0)
{
/* Failed to read registers from device. */
mbr3108_dbg("Probe failed.\n");
return ret;
}
/* Check result. */
fam_id = readbuf[MBR3108_FAMILY_ID - start_reg];
dev_id = (readbuf[MBR3108_DEVICE_ID + 0 - start_reg]) |
(readbuf[MBR3108_DEVICE_ID + 1 - start_reg] << 8);
dev_rev = readbuf[MBR3108_DEVICE_REV - start_reg];
mbr3108_dbg("family_id: 0x%02x, device_id: 0x%04x, device_rev: %d\n",
fam_id, dev_id, dev_rev);
if (fam_id != MBR3108_EXPECTED_FAMILY_ID ||
dev_id != MBR3108_EXPECTED_DEVICE_ID ||
dev_rev != MBR3108_EXPECTED_DEVICE_REV)
{
mbr3108_dbg("Probe failed, dev-id mismatch!\n");
mbr3108_dbg(" Expected: family_id: 0x%02x, device_id: "
"0x%04x, device_rev: %d\n",
MBR3108_EXPECTED_FAMILY_ID,
MBR3108_EXPECTED_DEVICE_ID,
MBR3108_EXPECTED_DEVICE_REV);
return -ENXIO;
}
return 0;
}
static ssize_t mbr3108_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct inode *inode;
FAR struct mbr3108_dev_s *priv;
size_t outlen;
irqstate_t flags;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = inode->i_private;
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
return ret;
}
ret = -EINVAL;
if (priv->debug_conf.debug_mode)
{
outlen = sizeof(struct mbr3108_sensor_debug_s);
if (buflen >= outlen)
{
ret = mbr3108_get_sensor_debug_data(priv, buffer);
}
}
else
{
outlen = sizeof(struct mbr3108_sensor_status_s);
if (buflen >= outlen)
{
ret = mbr3108_get_sensor_status(priv, buffer);
}
}
flags = enter_critical_section();
priv->int_pending = false;
leave_critical_section(flags);
nxsem_post(&priv->devsem);
return ret < 0 ? ret : outlen;
}
static ssize_t mbr3108_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
FAR struct inode *inode;
FAR struct mbr3108_dev_s *priv;
enum mbr3108_cmd_e type;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = inode->i_private;
if (buflen < sizeof(enum mbr3108_cmd_e))
{
return -EINVAL;
}
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
return ret;
}
type = *(FAR const enum mbr3108_cmd_e *)buffer;
switch (type)
{
case CYPRESS_MBR3108_CMD_SENSOR_CONF:
{
FAR const struct mbr3108_cmd_sensor_conf_s *conf =
(FAR const struct mbr3108_cmd_sensor_conf_s *)buffer;
if (buflen != sizeof(*conf))
{
ret = -EINVAL;
goto out;
}
ret = mbr3108_device_configuration(priv, &conf->conf);
break;
}
case CYPRESS_MBR3108_CMD_DEBUG_CONF:
{
FAR const struct mbr3108_cmd_debug_conf_s *conf =
(FAR const struct mbr3108_cmd_debug_conf_s *)buffer;
if (buflen != sizeof(*conf))
{
ret = -EINVAL;
goto out;
}
ret = mbr3108_debug_setup(priv, &conf->conf);
break;
}
case CYPRESS_MBR3108_CMD_CLEAR_LATCHED:
{
if (buflen != sizeof(type))
{
ret = -EINVAL;
goto out;
}
ret = mbr3108_clear_latched(priv);
break;
}
default:
ret = -EINVAL;
break;
}
out:
nxsem_post(&priv->devsem);
return ret < 0 ? ret : buflen;
}
static int mbr3108_open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct mbr3108_dev_s *priv;
unsigned int use_count;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = inode->i_private;
ret = nxsem_wait_uninterruptible(&priv->devsem);
if (ret < 0)
{
return ret;
}
use_count = priv->cref + 1;
if (use_count == 1)
{
/* First user, do power on. */
ret = priv->board->set_power(priv->board, true);
if (ret < 0)
{
goto out_sem;
}
/* Let chip to power up before probing */
nxsig_usleep(100 * 1000);
/* Check that device exists on I2C. */
ret = mbr3108_probe_device(priv);
if (ret < 0)
{
/* No such device. Power off the switch. */
priv->board->set_power(priv->board, false);
goto out_sem;
}
if (priv->sensor_conf)
{
/* Do configuration. */
ret = mbr3108_device_configuration(priv, priv->sensor_conf);
if (ret < 0)
{
/* Configuration failed. Power off the switch. */
priv->board->set_power(priv->board, false);
goto out_sem;
}
}
priv->cref = use_count;
}
else
{
DEBUGASSERT(use_count < UINT8_MAX && use_count > priv->cref);
priv->cref = use_count;
ret = 0;
}
out_sem:
nxsem_post(&priv->devsem);
return ret;
}
static int mbr3108_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct mbr3108_dev_s *priv;
int use_count;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = inode->i_private;
ret = nxsem_wait_uninterruptible(&priv->devsem);
if (ret < 0)
{
return ret;
}
use_count = priv->cref - 1;
if (use_count == 0)
{
/* Disable interrupt */
priv->board->irq_enable(priv->board, false);
/* Set chip in low-power mode. */
mbr3108_enter_low_power_mode(priv);
/* Last user, do power off. */
priv->board->set_power(priv->board, false);
priv->debug_conf.debug_mode = false;
priv->cref = use_count;
}
else
{
DEBUGASSERT(use_count > 0);
priv->cref = use_count;
}
nxsem_post(&priv->devsem);
return 0;
}
static void mbr3108_poll_notify(FAR struct mbr3108_dev_s *priv)
{
int i;
DEBUGASSERT(priv != NULL);
for (i = 0; i < CONFIG_INPUT_CYPRESS_MBR3108_NPOLLWAITERS; i++)
{
struct pollfd *fds = priv->fds[i];
if (fds)
{
mbr3108_dbg("Report events: %02x\n", fds->revents);
fds->revents |= POLLIN;
nxsem_post(fds->sem);
}
}
}
static int mbr3108_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct mbr3108_dev_s *priv;
FAR struct inode *inode;
bool pending;
int ret = 0;
int i;
DEBUGASSERT(filep && fds);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct mbr3108_dev_s *)inode->i_private;
ret = nxsem_wait(&priv->devsem);
if (ret < 0)
{
return ret;
}
if (setup)
{
/* Ignore waits that do not include POLLIN */
if ((fds->events & POLLIN) == 0)
{
ret = -EDEADLK;
goto out;
}
/* This is a request to set up the poll. Find an available slot for
* the poll structure reference.
*/
for (i = 0; i < CONFIG_INPUT_CYPRESS_MBR3108_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!priv->fds[i])
{
/* Bind the poll structure and this slot */
priv->fds[i] = fds;
fds->priv = &priv->fds[i];
break;
}
}
if (i >= CONFIG_INPUT_CYPRESS_MBR3108_NPOLLWAITERS)
{
fds->priv = NULL;
ret = -EBUSY;
}
else
{
pending = priv->int_pending;
if (pending)
{
mbr3108_poll_notify(priv);
}
}
}
else if (fds->priv)
{
/* This is a request to tear down the poll. */
FAR struct pollfd **slot = (FAR struct pollfd **)fds->priv;
DEBUGASSERT(slot != NULL);
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
}
out:
nxsem_post(&priv->devsem);
return ret;
}
static int mbr3108_isr_handler(int irq, FAR void *context, FAR void *arg)
{
FAR struct mbr3108_dev_s *priv = (FAR struct mbr3108_dev_s *)arg;
irqstate_t flags;
DEBUGASSERT(priv != NULL);
flags = enter_critical_section();
priv->int_pending = true;
leave_critical_section(flags);
mbr3108_poll_notify(priv);
return 0;
}
/****************************************************************************
* Public Functions
****************************************************************************/
int cypress_mbr3108_register(FAR const char *devpath,
FAR struct i2c_master_s *i2c_dev,
uint8_t i2c_devaddr,
struct mbr3108_board_s *board_config,
const struct mbr3108_sensor_conf_s *sensor_conf)
{
struct mbr3108_dev_s *priv;
int ret = 0;
/* Allocate device private structure. */
priv = kmm_zalloc(sizeof(struct mbr3108_dev_s));
if (!priv)
{
mbr3108_dbg("Memory cannot be allocated for mbr3108 sensor\n");
return -ENOMEM;
}
/* Setup device structure. */
priv->addr = i2c_devaddr;
priv->i2c = i2c_dev;
priv->board = board_config;
priv->sensor_conf = sensor_conf;
nxsem_init(&priv->devsem, 0, 1);
ret = register_driver(devpath, &g_mbr3108_fileops, 0666, priv);
if (ret < 0)
{
kmm_free(priv);
mbr3108_dbg("Error occurred during the driver registering\n");
return ret;
}
mbr3108_dbg("Registered with %d\n", ret);
/* Prepare interrupt line and handler. */
priv->board->irq_attach(priv->board, mbr3108_isr_handler, priv);
priv->board->irq_enable(priv->board, false);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink