1045 lines
32 KiB
C
1045 lines
32 KiB
C
/****************************************************************************
|
|
* drivers/lcd/mio283qt2.c
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/* This is a driver for the MI0283QT-2 LCD from Multi-Inno Technology Co.,
|
|
* Ltd. This LCD is based on the Himax HX8347-D LCD controller.
|
|
*
|
|
* References:
|
|
* 1) LCD Module Specification, Model :
|
|
* MI0283QT-2, Multi-Inno Technology Co., Ltd., Revision 1.0
|
|
* 2) Data Sheet:
|
|
* HX8347-D(T), 240RGB x 320 dot, 262K color, with internal GRAM, TFT
|
|
* Mobile Single Chip Driver Version 02 March, Doc No. HX8347-D(T)-DS,
|
|
* Himax Technologies, Inc., 2009,
|
|
*/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <sys/types.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <string.h>
|
|
#include <assert.h>
|
|
#include <errno.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/arch.h>
|
|
#include <nuttx/spi/spi.h>
|
|
#include <nuttx/lcd/lcd.h>
|
|
#include <nuttx/lcd/mio283qt2.h>
|
|
|
|
#ifdef CONFIG_LCD_MIO283QT2
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Configuration ************************************************************/
|
|
|
|
/* Check contrast selection */
|
|
|
|
#if !defined(CONFIG_LCD_MAXCONTRAST)
|
|
# define CONFIG_LCD_MAXCONTRAST 1
|
|
#endif
|
|
|
|
/* Check power setting */
|
|
|
|
#if !defined(CONFIG_LCD_MAXPOWER) || CONFIG_LCD_MAXPOWER < 1
|
|
# define CONFIG_LCD_MAXPOWER 1
|
|
#endif
|
|
|
|
#if CONFIG_LCD_MAXPOWER > 255
|
|
# error "CONFIG_LCD_MAXPOWER must be less than 256 to fit in uint8_t"
|
|
#endif
|
|
|
|
/* Check orientation */
|
|
|
|
#if defined(CONFIG_LCD_PORTRAIT)
|
|
# if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) || defined(CONFIG_LCD_RPORTRAIT)
|
|
# error "Cannot define both portrait and any other orientations"
|
|
# endif
|
|
#elif defined(CONFIG_LCD_RPORTRAIT)
|
|
# if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE)
|
|
# error "Cannot define both rportrait and any other orientations"
|
|
# endif
|
|
#elif defined(CONFIG_LCD_LANDSCAPE)
|
|
# ifdef CONFIG_LCD_RLANDSCAPE
|
|
# error "Cannot define both landscape and any other orientations"
|
|
# endif
|
|
#elif !defined(CONFIG_LCD_RLANDSCAPE)
|
|
# define CONFIG_LCD_LANDSCAPE 1
|
|
#endif
|
|
|
|
/* Display/Color Properties *************************************************/
|
|
|
|
/* Display Resolution */
|
|
|
|
#if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE)
|
|
# define MIO283QT2_XRES 320
|
|
# define MIO283QT2_YRES 240
|
|
#else
|
|
# define MIO283QT2_XRES 240
|
|
# define MIO283QT2_YRES 320
|
|
#endif
|
|
|
|
/* Color depth and format */
|
|
|
|
#define MIO283QT2_BPP 16
|
|
#define MIO283QT2_COLORFMT FB_FMT_RGB16_565
|
|
|
|
/* Hardware LCD/LCD controller definitions **********************************/
|
|
|
|
/* In this driver, I chose to use all literal constants for register address
|
|
* and values. Some recent experiences have shown me that during LCD bringup,
|
|
* it is more important to know the binary values rather than nice, people
|
|
* friendly names. Sad, but true.
|
|
*/
|
|
|
|
#define HIMAX_ID 0x0047
|
|
|
|
/* LCD Profiles *************************************************************/
|
|
|
|
/* Many details of the controller initialization must, unfortunately, vary
|
|
* from LCD to LCD. I have looked at the spec and at three different drivers
|
|
* for LCDs that have MIO283QT2 controllers.
|
|
* I have tried to summarize these differences as "LCD profiles"
|
|
*
|
|
* Most of the differences between LCDs are nothing more than a few minor bit
|
|
* settings. The most significant difference between LCD drivers in is the
|
|
* manner in which the LCD is powered up and in how the power controls are
|
|
* set.
|
|
* My suggestion is that if you have working LCD initialization code, you
|
|
* should simply replace the code in mio283qt2_hwinitialize with your working
|
|
* code.
|
|
*/
|
|
|
|
#if defined (CONFIG_MIO283QT2_PROFILE2)
|
|
# undef MIO283QT2_USE_SIMPLE_INIT
|
|
|
|
/* PWRCTRL1: AP=smalll-to-medium, DC=Flinex24, BT=+5/-4, DCT=Flinex24 */
|
|
|
|
# define PWRCTRL1_SETTING \
|
|
(MIO283QT2_PWRCTRL1_AP_SMMED | MIO283QT2_PWRCTRL1_DC_FLINEx24 | \
|
|
MIO283QT2_PWRCTRL1_BT_p5m4 | MIO283QT2_PWRCTRL1_DCT_FLINEx24)
|
|
|
|
/* PWRCTRL2: 5.1v */
|
|
|
|
# define PWRCTRL2_SETTING MIO283QT2_PWRCTRL2_VRC_5p1V
|
|
|
|
/* PWRCTRL3: x 2.165
|
|
* NOTE:
|
|
* Many drivers have bit 8 set which is not defined in the MIO283QT2 spec.
|
|
*/
|
|
|
|
# define PWRCTRL3_SETTING MIO283QT2_PWRCTRL3_VRH_x2p165
|
|
|
|
/* PWRCTRL4: VDV=9 + VCOMG */
|
|
|
|
# define PWRCTRL4_SETTING (MIO283QT2_PWRCTRL4_VDV(9) | MIO283QT2_PWRCTRL4_VCOMG)
|
|
|
|
/* PWRCTRL5: VCM=56 + NOTP */
|
|
|
|
# define PWRCTRL5_SETTING (MIO283QT2_PWRCTRL5_VCM(56) | MIO283QT2_PWRCTRL5_NOTP)
|
|
|
|
#elif defined (CONFIG_MIO283QT2_PROFILE3)
|
|
# undef MIO283QT2_USE_SIMPLE_INIT
|
|
|
|
/* PWRCTRL1: AP=smalll-to-medium, DC=Flinex24, BT=+5/-4, DCT=Flinex24 */
|
|
|
|
# define PWRCTRL1_SETTING \
|
|
(MIO283QT2_PWRCTRL1_AP_SMMED | MIO283QT2_PWRCTRL1_DC_FLINEx24 | \
|
|
MIO283QT2_PWRCTRL1_BT_p5m4 | MIO283QT2_PWRCTRL1_DCT_FLINEx24)
|
|
|
|
/* PWRCTRL2: 5.1v */
|
|
|
|
# define PWRCTRL2_SETTING MIO283QT2_PWRCTRL2_VRC_5p1V
|
|
|
|
/* PWRCTRL3: x 2.165
|
|
* NOTE:
|
|
* Many drivers have bit 8 set which is not defined in the MIO283QT2 spec.
|
|
*/
|
|
|
|
# define PWRCTRL3_SETTING MIO283QT2_PWRCTRL3_VRH_x2p165
|
|
|
|
/* PWRCTRL4: VDV=9 + VCOMG */
|
|
|
|
# define PWRCTRL4_SETTING (MIO283QT2_PWRCTRL4_VDV(9) | MIO283QT2_PWRCTRL4_VCOMG)
|
|
|
|
/* PWRCTRL5: VCM=56 + NOTP */
|
|
|
|
# define PWRCTRL5_SETTING (MIO283QT2_PWRCTRL5_VCM(56) | MIO283QT2_PWRCTRL5_NOTP)
|
|
|
|
#else /* if defined (CONFIG_MIO283QT2_PROFILE1) */
|
|
# undef MIO283QT2_USE_SIMPLE_INIT
|
|
# define MIO283QT2_USE_SIMPLE_INIT 1
|
|
|
|
/* PWRCTRL1: AP=medium-to-large, DC=Fosc/4, BT=+5/-4, DCT=Fosc/4 */
|
|
|
|
# define PWRCTRL1_SETTING \
|
|
(MIO283QT2_PWRCTRL1_AP_MEDLG | MIO283QT2_PWRCTRL1_DC_FOSd4 | \
|
|
MIO283QT2_PWRCTRL1_BT_p5m4 | MIO283QT2_PWRCTRL1_DCT_FOSd4)
|
|
|
|
/* PWRCTRL2: 5.3v */
|
|
|
|
# define PWRCTRL2_SETTING MIO283QT2_PWRCTRL2_VRC_5p3V
|
|
|
|
/* PWRCTRL3: x 2.570
|
|
* NOTE:
|
|
* Many drivers have bit 8 set which is not defined in the MIO283QT2 spec.
|
|
*/
|
|
|
|
# define PWRCTRL3_SETTING MIO283QT2_PWRCTRL3_VRH_x2p570
|
|
|
|
/* PWRCTRL4: VDV=12 + VCOMG */
|
|
|
|
# define PWRCTRL4_SETTING (MIO283QT2_PWRCTRL4_VDV(12) | MIO283QT2_PWRCTRL4_VCOMG)
|
|
|
|
/* PWRCTRL5: VCM=60 + NOTP */
|
|
|
|
# define PWRCTRL5_SETTING (MIO283QT2_PWRCTRL5_VCM(60) | MIO283QT2_PWRCTRL5_NOTP)
|
|
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Private Type Definition
|
|
****************************************************************************/
|
|
|
|
/* This structure describes the state of this driver */
|
|
|
|
struct mio283qt2_dev_s
|
|
{
|
|
/* Publicly visible device structure */
|
|
|
|
struct lcd_dev_s dev;
|
|
|
|
/* Private LCD-specific information follows */
|
|
|
|
FAR struct mio283qt2_lcd_s *lcd; /* The contained platform-specific, LCD interface */
|
|
uint8_t power; /* Current power setting */
|
|
|
|
/* This is working memory allocated by the LCD driver for each LCD device
|
|
* and for each color plane.
|
|
* This memory will hold one raster line of data.
|
|
* The size of the allocated run buffer must therefore be at least
|
|
* (bpp * xres / 8). Actual alignment of the buffer must conform to the
|
|
* bitwidth of the underlying pixel type.
|
|
*
|
|
* If there are multiple planes, they may share the same working buffer
|
|
* because different planes will not be operate on concurrently. However,
|
|
* if there are multiple LCD devices, they must each have unique run
|
|
* buffers.
|
|
*/
|
|
|
|
uint16_t runbuffer[MIO283QT2_XRES];
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Function Protototypes
|
|
****************************************************************************/
|
|
|
|
/* Low Level LCD access */
|
|
|
|
static void mio283qt2_putreg(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint8_t regaddr,
|
|
uint16_t regval);
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
static uint16_t mio283qt2_readreg(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint8_t regaddr);
|
|
#endif
|
|
static inline void mio283qt2_gramwrite(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint16_t rgbcolor);
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
static inline void mio283qt2_readsetup(FAR struct mio283qt2_lcd_s *lcd,
|
|
FAR uint16_t *accum);
|
|
static inline uint16_t mio283qt2_gramread(FAR struct mio283qt2_lcd_s *lcd,
|
|
FAR uint16_t *accum);
|
|
#endif
|
|
static void mio283qt2_setarea(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint16_t x0, uint16_t y0,
|
|
uint16_t x1, uint16_t y1);
|
|
|
|
/* LCD Data Transfer Methods */
|
|
|
|
static int mio283qt2_putrun(fb_coord_t row, fb_coord_t col,
|
|
FAR const uint8_t *buffer,
|
|
size_t npixels);
|
|
static int mio283qt2_getrun(fb_coord_t row, fb_coord_t col,
|
|
FAR uint8_t *buffer,
|
|
size_t npixels);
|
|
|
|
/* LCD Configuration */
|
|
|
|
static int mio283qt2_getvideoinfo(FAR struct lcd_dev_s *dev,
|
|
FAR struct fb_videoinfo_s *vinfo);
|
|
static int mio283qt2_getplaneinfo(FAR struct lcd_dev_s *dev,
|
|
unsigned int planeno,
|
|
FAR struct lcd_planeinfo_s *pinfo);
|
|
|
|
/* LCD RGB Mapping */
|
|
|
|
#ifdef CONFIG_FB_CMAP
|
|
# error "RGB color mapping not supported by this driver"
|
|
#endif
|
|
|
|
/* Cursor Controls */
|
|
|
|
#ifdef CONFIG_FB_HWCURSOR
|
|
# error "Cursor control not supported by this driver"
|
|
#endif
|
|
|
|
/* LCD Specific Controls */
|
|
|
|
static int mio283qt2_getpower(FAR struct lcd_dev_s *dev);
|
|
static int mio283qt2_setpower(FAR struct lcd_dev_s *dev, int power);
|
|
static int mio283qt2_getcontrast(FAR struct lcd_dev_s *dev);
|
|
static int mio283qt2_setcontrast(FAR struct lcd_dev_s *dev,
|
|
unsigned int contrast);
|
|
|
|
/* Initialization */
|
|
|
|
static inline int mio283qt2_hwinitialize(FAR struct mio283qt2_dev_s *priv);
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
/* This driver can support only a signal MIO283QT2 device.
|
|
* This is due to an unfortunate decision made whent he getrun and
|
|
* putrun methods were designed.
|
|
* The following is the single MIO283QT2 driver state instance:
|
|
*/
|
|
|
|
static struct mio283qt2_dev_s g_lcddev;
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_putreg(lcd,
|
|
*
|
|
* Description:
|
|
* Write to an LCD register
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void mio283qt2_putreg(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint8_t regaddr, uint16_t regval)
|
|
{
|
|
/* Set the index register to the register address and write the register
|
|
* contents
|
|
*/
|
|
|
|
lcd->index(lcd, regaddr);
|
|
lcd->write(lcd, regval);
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_readreg
|
|
*
|
|
* Description:
|
|
* Read from an LCD register
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
static uint16_t mio283qt2_readreg(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint8_t regaddr)
|
|
{
|
|
/* Set the index register to the register address and read the register
|
|
* contents.
|
|
*/
|
|
|
|
lcd->index(lcd, regaddr);
|
|
return lcd->read(lcd);
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_gramselect
|
|
*
|
|
* Description:
|
|
* Setup to read or write multiple pixels to the GRAM memory
|
|
*
|
|
****************************************************************************/
|
|
|
|
static inline void mio283qt2_gramselect(FAR struct mio283qt2_lcd_s *lcd)
|
|
{
|
|
lcd->index(lcd, 0x22);
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_gramwrite
|
|
*
|
|
* Description:
|
|
* Setup to read or write multiple pixels to the GRAM memory
|
|
*
|
|
****************************************************************************/
|
|
|
|
static inline void mio283qt2_gramwrite(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint16_t data)
|
|
{
|
|
lcd->write(lcd, data);
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_readsetup
|
|
*
|
|
* Description:
|
|
* Prime the operation by reading one pixel from the GRAM memory if
|
|
* necessary for this LCD type. When reading 16-bit gram data, there may
|
|
* be some shifts in the returned data:
|
|
*
|
|
* - ILI932x: Discard first dummy read; no shift in the return data
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
static inline void mio283qt2_readsetup(FAR struct mio283qt2_lcd_s *lcd,
|
|
FAR uint16_t *accum)
|
|
{
|
|
#if 0 /* Probably not necessary... untested */
|
|
/* Read-ahead one pixel */
|
|
|
|
*accum = lcd->read(lcd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_gramread
|
|
*
|
|
* Description:
|
|
* Read one correctly aligned pixel from the GRAM memory.
|
|
* Possibly shifting the data and possibly swapping red and green
|
|
* components.
|
|
*
|
|
* - ILI932x: Unknown -- assuming colors are in the color order
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
static inline uint16_t mio283qt2_gramread(FAR struct mio283qt2_lcd_s *lcd,
|
|
FAR uint16_t *accum)
|
|
{
|
|
/* Read the value (GRAM register already selected) */
|
|
|
|
return lcd->read(lcd);
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_setarea
|
|
*
|
|
* Description:
|
|
* Set the cursor position.
|
|
* In landscape mode, the "column" is actually the physical
|
|
* Y position and the "row" is the physical X position.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void mio283qt2_setarea(FAR struct mio283qt2_lcd_s *lcd,
|
|
uint16_t x0, uint16_t y0,
|
|
uint16_t x1, uint16_t y1)
|
|
{
|
|
mio283qt2_putreg(lcd, 0x03, (x0 & 0x00ff)); /* set x0 */
|
|
mio283qt2_putreg(lcd, 0x02, (x0 >> 8)); /* set x0 */
|
|
mio283qt2_putreg(lcd, 0x05, (x1 & 0x00ff)); /* set x1 */
|
|
mio283qt2_putreg(lcd, 0x04, (x1 >> 8)); /* set x1 */
|
|
mio283qt2_putreg(lcd, 0x07, (y0 & 0x00ff)); /* set y0 */
|
|
mio283qt2_putreg(lcd, 0x06, (y0 >> 8)); /* set y0 */
|
|
mio283qt2_putreg(lcd, 0x09, (y1 & 0x00ff)); /* set y1 */
|
|
mio283qt2_putreg(lcd, 0x08, (y1 >> 8)); /* set y1 */
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_dumprun
|
|
*
|
|
* Description:
|
|
* Dump the contexts of the run buffer:
|
|
*
|
|
* run - The buffer in containing the run read to be dumped
|
|
* npixels - The number of pixels to dump
|
|
*
|
|
****************************************************************************/
|
|
|
|
#if 0 /* Sometimes useful */
|
|
static void mio283qt2_dumprun(FAR const char *msg,
|
|
FAR uint16_t *run,
|
|
size_t npixels)
|
|
{
|
|
int i;
|
|
int j;
|
|
|
|
syslog(LOG_INFO, "\n%s:\n", msg);
|
|
for (i = 0; i < npixels; i += 16)
|
|
{
|
|
up_putc(' ');
|
|
syslog(LOG_INFO, " ");
|
|
for (j = 0; j < 16; j++)
|
|
{
|
|
syslog(LOG_INFO, " %04x", *run++);
|
|
}
|
|
|
|
up_putc('\n');
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_putrun
|
|
*
|
|
* Description:
|
|
* This method can be used to write a partial raster line to the LCD:
|
|
*
|
|
* row - Starting row to write to (range: 0 <= row < yres)
|
|
* col - Starting column to write to (range: 0 <= col <= xres-npixels)
|
|
* buffer - The buffer containing the run to be written to the LCD
|
|
* npixels - The number of pixels to write to the LCD
|
|
* (range: 0 < npixels <= xres-col)
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_putrun(fb_coord_t row, fb_coord_t col,
|
|
FAR const uint8_t *buffer,
|
|
size_t npixels)
|
|
{
|
|
FAR struct mio283qt2_dev_s *priv = &g_lcddev;
|
|
FAR struct mio283qt2_lcd_s *lcd = priv->lcd;
|
|
FAR const uint16_t *src = (FAR const uint16_t *)buffer;
|
|
int i;
|
|
|
|
/* Buffer must be provided and aligned to a 16-bit address boundary */
|
|
|
|
lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels);
|
|
DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0);
|
|
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Write the run to GRAM. */
|
|
|
|
mio283qt2_setarea(lcd, col, row, col + npixels - 1, row);
|
|
mio283qt2_gramselect(lcd);
|
|
|
|
for (i = 0; i < npixels; i++)
|
|
{
|
|
mio283qt2_gramwrite(lcd, *src);
|
|
src++;
|
|
}
|
|
|
|
/* De-select the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_getrun
|
|
*
|
|
* Description:
|
|
* This method can be used to read a partial raster line from the LCD:
|
|
*
|
|
* row - Starting row to read from (range: 0 <= row < yres)
|
|
* col - Starting column to read read (range: 0 <= col <= xres-npixels)
|
|
* buffer - The buffer in which to return the run read from the LCD
|
|
* npixels - The number of pixels to read from the LCD
|
|
* (range: 0 < npixels <= xres-col)
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_getrun(fb_coord_t row, fb_coord_t col,
|
|
FAR uint8_t *buffer,
|
|
size_t npixels)
|
|
{
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
FAR struct mio283qt2_dev_s *priv = &g_lcddev;
|
|
FAR struct mio283qt2_lcd_s *lcd = priv->lcd;
|
|
FAR uint16_t *dest = (FAR uint16_t *)buffer;
|
|
uint16_t accum;
|
|
int i;
|
|
|
|
/* Buffer must be provided and aligned to a 16-bit address boundary */
|
|
|
|
lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels);
|
|
DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0);
|
|
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Read the run from GRAM. */
|
|
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Red the run fram GRAM. */
|
|
|
|
mio283qt2_setarea(lcd, col, row, col + npixels - 1, row);
|
|
mio283qt2_gramselect(lcd);
|
|
|
|
/* Prime the pump for unaligned read data */
|
|
|
|
mio283qt2_readsetup(lcd, &accum);
|
|
|
|
for (i = 0; i < npixels; i++)
|
|
{
|
|
*dest++ = mio283qt2_gramread(lcd, &accum);
|
|
}
|
|
|
|
/* De-select the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
return OK;
|
|
#else
|
|
return -ENOSYS;
|
|
#endif
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_getvideoinfo
|
|
*
|
|
* Description:
|
|
* Get information about the LCD video controller configuration.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_getvideoinfo(FAR struct lcd_dev_s *dev,
|
|
FAR struct fb_videoinfo_s *vinfo)
|
|
{
|
|
DEBUGASSERT(dev && vinfo);
|
|
lcdinfo("fmt: %d xres: %d yres: %d nplanes: 1\n",
|
|
MIO283QT2_COLORFMT, MIO283QT2_XRES, MIO283QT2_XRES);
|
|
|
|
vinfo->fmt = MIO283QT2_COLORFMT; /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */
|
|
vinfo->xres = MIO283QT2_XRES; /* Horizontal resolution in pixel columns */
|
|
vinfo->yres = MIO283QT2_YRES; /* Vertical resolution in pixel rows */
|
|
vinfo->nplanes = 1; /* Number of color planes supported */
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_getplaneinfo
|
|
*
|
|
* Description:
|
|
* Get information about the configuration of each LCD color plane.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_getplaneinfo(FAR struct lcd_dev_s *dev,
|
|
unsigned int planeno,
|
|
FAR struct lcd_planeinfo_s *pinfo)
|
|
{
|
|
FAR struct mio283qt2_dev_s *priv = (FAR struct mio283qt2_dev_s *)dev;
|
|
|
|
DEBUGASSERT(dev && pinfo && planeno == 0);
|
|
lcdinfo("planeno: %d bpp: %d\n", planeno, MIO283QT2_BPP);
|
|
|
|
pinfo->putrun = mio283qt2_putrun; /* Put a run into LCD memory */
|
|
pinfo->getrun = mio283qt2_getrun; /* Get a run from LCD memory */
|
|
pinfo->buffer = (FAR uint8_t *)priv->runbuffer; /* Run scratch buffer */
|
|
pinfo->bpp = MIO283QT2_BPP; /* Bits-per-pixel */
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_getpower
|
|
*
|
|
* Description:
|
|
* Get the LCD panel power status
|
|
* (0: full off - CONFIG_LCD_MAXPOWER: full on).
|
|
* On backlit LCDs, this setting may correspond to the backlight setting.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_getpower(FAR struct lcd_dev_s *dev)
|
|
{
|
|
lcdinfo("power: %d\n", 0);
|
|
return g_lcddev.power;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_poweroff
|
|
*
|
|
* Description:
|
|
* Enable/disable LCD panel power
|
|
* (0: full off - CONFIG_LCD_MAXPOWER: full on).
|
|
* On backlit LCDs, this setting may correspond to the backlight setting.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_poweroff(FAR struct mio283qt2_lcd_s *lcd)
|
|
{
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Set the backlight off */
|
|
|
|
lcd->backlight(lcd, 0);
|
|
|
|
/* Turn the display off */
|
|
|
|
mio283qt2_putreg(lcd, 0x28, 0x0000); /* GON=0, DTE=0, D=0 */
|
|
|
|
/* Deselect the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
|
|
/* Remember the power off state */
|
|
|
|
g_lcddev.power = 0;
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_setpower
|
|
*
|
|
* Description:
|
|
* Enable/disable LCD panel power
|
|
* (0: full off - CONFIG_LCD_MAXPOWER: full on).
|
|
* On backlit LCDs, this setting may correspond to the backlight setting.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_setpower(FAR struct lcd_dev_s *dev, int power)
|
|
{
|
|
FAR struct mio283qt2_dev_s *priv = (FAR struct mio283qt2_dev_s *)dev;
|
|
FAR struct mio283qt2_lcd_s *lcd = priv->lcd;
|
|
|
|
lcdinfo("power: %d\n", power);
|
|
DEBUGASSERT((unsigned)power <= CONFIG_LCD_MAXPOWER);
|
|
|
|
/* Set new power level */
|
|
|
|
if (power > 0)
|
|
{
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Set the backlight level */
|
|
|
|
lcd->backlight(lcd, power);
|
|
|
|
/* Then turn the display on:
|
|
* D=ON(3) CM=0 DTE=1 GON=1 SPT=0 VLE=0 PT=0
|
|
*/
|
|
|
|
mio283qt2_putreg(lcd, 0x28, 0x0038); /* GON=1, DTE=1, D=2 */
|
|
up_mdelay(40);
|
|
mio283qt2_putreg(lcd, 0x28, 0x003c); /* GON=1, DTE=1, D=3 */
|
|
|
|
/* Deselect the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
|
|
/* Remember the power on state */
|
|
|
|
g_lcddev.power = power;
|
|
}
|
|
else
|
|
{
|
|
/* Turn the display off */
|
|
|
|
mio283qt2_poweroff(lcd);
|
|
}
|
|
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_getcontrast
|
|
*
|
|
* Description:
|
|
* Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST).
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_getcontrast(FAR struct lcd_dev_s *dev)
|
|
{
|
|
lcdinfo("Not implemented\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_setcontrast
|
|
*
|
|
* Description:
|
|
* Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST).
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mio283qt2_setcontrast(FAR struct lcd_dev_s *dev,
|
|
unsigned int contrast)
|
|
{
|
|
lcdinfo("contrast: %d\n", contrast);
|
|
return -ENOSYS;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_hwinitialize
|
|
*
|
|
* Description:
|
|
* Initialize the LCD hardware.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static inline int mio283qt2_hwinitialize(FAR struct mio283qt2_dev_s *priv)
|
|
{
|
|
FAR struct mio283qt2_lcd_s *lcd = priv->lcd;
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
uint16_t id;
|
|
#endif
|
|
int ret;
|
|
|
|
/* Select the LCD */
|
|
|
|
lcd->select(lcd);
|
|
|
|
/* Read the HIMAX ID registger (0x00) */
|
|
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
id = mio283qt2_readreg(lcd, 0x00);
|
|
lcdinfo("LCD ID: %04x\n", id);
|
|
|
|
/* Check if the ID is for the MIO283QT2 */
|
|
|
|
if (id == HIMAX_ID)
|
|
#endif
|
|
{
|
|
/* Driving ability */
|
|
|
|
mio283qt2_putreg(lcd, 0xea, 0x0000); /* PTBA[15:8] */
|
|
mio283qt2_putreg(lcd, 0xeb, 0x0020); /* PTBA[7:0] */
|
|
mio283qt2_putreg(lcd, 0xec, 0x000c); /* STBA[15:8] */
|
|
mio283qt2_putreg(lcd, 0xed, 0x00c4); /* STBA[7:0] */
|
|
mio283qt2_putreg(lcd, 0xe8, 0x0040); /* OPON[7:0] */
|
|
mio283qt2_putreg(lcd, 0xe9, 0x0038); /* OPON1[7:0] */
|
|
mio283qt2_putreg(lcd, 0xf1, 0x0001); /* OTPS1B */
|
|
mio283qt2_putreg(lcd, 0xf2, 0x0010); /* GEN */
|
|
mio283qt2_putreg(lcd, 0x27, 0x00a3);
|
|
|
|
/* Power voltage */
|
|
|
|
mio283qt2_putreg(lcd, 0x1b, 0x001b); /* VRH = 4.65 */
|
|
mio283qt2_putreg(lcd, 0x1a, 0x0001); /* BT */
|
|
mio283qt2_putreg(lcd, 0x24, 0x002f); /* VMH */
|
|
mio283qt2_putreg(lcd, 0x25, 0x0057); /* VML */
|
|
|
|
/* Vcom offset */
|
|
|
|
mio283qt2_putreg(lcd, 0x23, 0x008d); /* For flicker adjust */
|
|
|
|
/* Power on */
|
|
|
|
mio283qt2_putreg(lcd, 0x18, 0x0036);
|
|
mio283qt2_putreg(lcd, 0x19, 0x0001); /* Start oscillator */
|
|
mio283qt2_putreg(lcd, 0x01, 0x0000); /* Wakeup */
|
|
mio283qt2_putreg(lcd, 0x1f, 0x0088);
|
|
up_mdelay(5);
|
|
mio283qt2_putreg(lcd, 0x1f, 0x0080);
|
|
up_mdelay(5);
|
|
mio283qt2_putreg(lcd, 0x1f, 0x0090);
|
|
up_mdelay(5);
|
|
mio283qt2_putreg(lcd, 0x1f, 0x00d0);
|
|
up_mdelay(5);
|
|
|
|
/* Gamma 2.8 setting */
|
|
|
|
mio283qt2_putreg(lcd, 0x40, 0x0000);
|
|
mio283qt2_putreg(lcd, 0x41, 0x0000);
|
|
mio283qt2_putreg(lcd, 0x42, 0x0001);
|
|
mio283qt2_putreg(lcd, 0x43, 0x0013);
|
|
mio283qt2_putreg(lcd, 0x44, 0x0010);
|
|
mio283qt2_putreg(lcd, 0x45, 0x0026);
|
|
mio283qt2_putreg(lcd, 0x46, 0x0008);
|
|
mio283qt2_putreg(lcd, 0x47, 0x0051);
|
|
mio283qt2_putreg(lcd, 0x48, 0x0002);
|
|
mio283qt2_putreg(lcd, 0x49, 0x0012);
|
|
mio283qt2_putreg(lcd, 0x4a, 0x0018);
|
|
mio283qt2_putreg(lcd, 0x4b, 0x0019);
|
|
mio283qt2_putreg(lcd, 0x4c, 0x0014);
|
|
|
|
mio283qt2_putreg(lcd, 0x50, 0x0019);
|
|
mio283qt2_putreg(lcd, 0x51, 0x002f);
|
|
mio283qt2_putreg(lcd, 0x52, 0x002c);
|
|
mio283qt2_putreg(lcd, 0x53, 0x003e);
|
|
mio283qt2_putreg(lcd, 0x54, 0x003f);
|
|
mio283qt2_putreg(lcd, 0x55, 0x003f);
|
|
mio283qt2_putreg(lcd, 0x56, 0x002e);
|
|
mio283qt2_putreg(lcd, 0x57, 0x0077);
|
|
mio283qt2_putreg(lcd, 0x58, 0x000b);
|
|
mio283qt2_putreg(lcd, 0x59, 0x0006);
|
|
mio283qt2_putreg(lcd, 0x5a, 0x0007);
|
|
mio283qt2_putreg(lcd, 0x5b, 0x000d);
|
|
mio283qt2_putreg(lcd, 0x5c, 0x001d);
|
|
mio283qt2_putreg(lcd, 0x5d, 0x00cc);
|
|
|
|
/* 4K Color Selection */
|
|
|
|
mio283qt2_putreg(lcd, 0x17, 0x0003);
|
|
mio283qt2_putreg(lcd, 0x17, 0x0005); /* 0x0005=65k, 0x0006=262k */
|
|
|
|
/* Panel characteristics */
|
|
|
|
mio283qt2_putreg(lcd, 0x36, 0x0000);
|
|
|
|
/* Display Setting */
|
|
|
|
mio283qt2_putreg(lcd, 0x01, 0x0000); /* IDMON=0, INVON=0, NORON=0, PTLON=0 */
|
|
|
|
#if defined(CONFIG_LCD_LANDSCAPE)
|
|
mio283qt2_putreg(lcd, 0x16, 0x00a8); /* MY=1, MX=0, MV=1, ML=0, BGR=1 */
|
|
#elif defined(CONFIG_LCD_PORTRAIT)
|
|
mio283qt2_putreg(lcd, 0x16, 0x0008); /* MY=0, MX=0, MV=0, ML=0, BGR=1 */
|
|
#elif defined(CONFIG_LCD_RLANDSCAPE)
|
|
mio283qt2_putreg(lcd, 0x16, 0x0068); /* MY=0, MX=1, MV=1, ML=0, BGR=1 */
|
|
#elif defined(CONFIG_LCD_RPORTRAIT)
|
|
mio283qt2_putreg(lcd, 0x16, 0x00c8); /* MY=1, MX=0, MV=1, ML=0, BGR=1 */
|
|
#endif
|
|
|
|
/* Window setting */
|
|
|
|
mio283qt2_setarea(lcd, 0, 0, (MIO283QT2_XRES - 1),
|
|
(MIO283QT2_YRES - 1));
|
|
ret = OK;
|
|
}
|
|
#ifndef CONFIG_LCD_NOGETRUN
|
|
else
|
|
{
|
|
lcderr("ERROR: Unsupported LCD type\n");
|
|
ret = -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
/* De-select the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_lcdinitialize
|
|
*
|
|
* Description:
|
|
* Initialize the LCD video hardware.
|
|
* The initial state of the LCD is fully initialized, display memory
|
|
* cleared, and the LCD ready to use, but with the power
|
|
* setting at 0 (full off).
|
|
*
|
|
****************************************************************************/
|
|
|
|
FAR struct lcd_dev_s *mio283qt2_lcdinitialize(
|
|
FAR struct mio283qt2_lcd_s *lcd)
|
|
{
|
|
int ret;
|
|
|
|
lcdinfo("Initializing\n");
|
|
|
|
/* If we ccould support multiple MIO283QT2 devices, this is where we
|
|
* would allocate a new driver data structure... but we can't.
|
|
* Why not?
|
|
* Because of a bad should the form of the getrun() and putrun methods.
|
|
*/
|
|
|
|
FAR struct mio283qt2_dev_s *priv = &g_lcddev;
|
|
|
|
/* Initialize the driver data structure */
|
|
|
|
priv->dev.getvideoinfo = mio283qt2_getvideoinfo;
|
|
priv->dev.getplaneinfo = mio283qt2_getplaneinfo;
|
|
priv->dev.getpower = mio283qt2_getpower;
|
|
priv->dev.setpower = mio283qt2_setpower;
|
|
priv->dev.getcontrast = mio283qt2_getcontrast;
|
|
priv->dev.setcontrast = mio283qt2_setcontrast;
|
|
priv->lcd = lcd;
|
|
|
|
/* Configure and enable LCD */
|
|
|
|
ret = mio283qt2_hwinitialize(priv);
|
|
if (ret == OK)
|
|
{
|
|
/* Clear the display (setting it to the color 0=black) */
|
|
|
|
mio283qt2_clear(&priv->dev, 0);
|
|
|
|
/* Turn the display off */
|
|
|
|
mio283qt2_poweroff(lcd);
|
|
return &g_lcddev.dev;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mio283qt2_clear
|
|
*
|
|
* Description:
|
|
* This is a non-standard LCD interface just for the stm3240g-EVAL board.
|
|
* Because of the various rotations, clearing the display in the normal
|
|
* way by writing a sequences of runs that covers the entire display can be
|
|
* very slow. Here the display is cleared by simply setting all GRAM
|
|
* memory to the specified color.
|
|
*
|
|
****************************************************************************/
|
|
|
|
void mio283qt2_clear(FAR struct lcd_dev_s *dev, uint16_t color)
|
|
{
|
|
FAR struct mio283qt2_dev_s *priv = (FAR struct mio283qt2_dev_s *)dev;
|
|
FAR struct mio283qt2_lcd_s *lcd = priv->lcd;
|
|
uint32_t i;
|
|
|
|
/* Select the LCD and set the drawring area */
|
|
|
|
lcd->select(lcd);
|
|
mio283qt2_setarea(lcd, 0, 0, (MIO283QT2_XRES - 1), (MIO283QT2_YRES - 1));
|
|
|
|
/* Prepare to write GRAM data */
|
|
|
|
mio283qt2_gramselect(lcd);
|
|
|
|
/* Copy color into all of GRAM.
|
|
* Orientation does not matter in this case.
|
|
*/
|
|
|
|
for (i = 0; i < MIO283QT2_XRES * MIO283QT2_YRES; i++)
|
|
{
|
|
mio283qt2_gramwrite(lcd, color);
|
|
}
|
|
|
|
/* De-select the LCD */
|
|
|
|
lcd->deselect(lcd);
|
|
}
|
|
|
|
#endif /* CONFIG_LCD_MIO283QT2 */
|