README
======
This directory contains the port of NuttX to the pcDuino v1 board
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
I have not compared these boards in detail, but I believe that the
differences are cosmetic. This port was developed on the v1 board, but
the others may be compatible:
pcDuino Lite (See http://www.pcduino.com/?page_id=1707)
ITEMS DETAILS
-------------------- ---------------------------------------------------
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
DRAM 512B
Onboard Storage NO Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
Extension Interface 2.54mm Headers
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
Power 5V, 2000mA
Overall Size 125mm X 52mm
pcDuino v1 (http://www.pcduino.com/?page_id=12)
ITEMS DETAILS
-------------------- ---------------------------------------------------
Items Details
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
* DRAM 1GB
* Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
Extension Interface 2.54mm Headers
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
Power 5V, 2000mA
Overall Size 125mm X 52mm
pcDuino v2 (http://www.pcduino.com/?page_id=1618)
ITEMS DETAILS
-------------------- ---------------------------------------------------
Items Details
CPU 1GHz ARM Cortex A8
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
DRAM 1GB
Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
Video Output HDMI
* Extension Interface Arduino Headers
* Network interface 10/100Mbps RJ45 and on-board WiFi module
Power 5V, 2000mA
Overall Size 125mm X 52mm
Main features of the Allwinner A10
(See http://www.allwinnertech.com/en/product/a10.html):
CPU
- ARM Cortex<65>-A8
- 32KB I-Cache
- 32KB D-Cache
- 256KB L2 Cache
GPU
- ARM Mali-400
Video
- UHD 2160P video decoding
- 3D video decoding
- Support various video decoding formats, including VP8, AVS, H. 264
MVC, VC-1, MPEG-1,2,4, etc
- H.264 HP video encoding up to 1080p @ 30 fps or dual-channel 720p @ 30
fps
Display
- Multi-channel HD display
- Integrated HDMI 1.4
- YPbPr, CVBS, VGA
- Multiple LCD interfaces, including CPU, RGB, LVDS up to Full HD
Memory
- 32-bit DDR2/DDR3
- Memory capacity up to 16G bits
- SLC/MLC/TLC/DDR NAND
- 8 flash chips, 64-bit ECC
Memory capacity up to 64GB
Support NAND of 5xnm, 4xnm, 3xnm, 2xnm, etc
Support NAND of Samsung, Toshiba, Hynix, etc
Boot Devices
- NAND Flash
- SPI NOR Flash
- SD Card
- USB
Contents
========
- pcDuino v1 Connectors
- Serial Console
- LEDs
- Buttons
pcDuino v1 Connectors
=====================
TOP
---
- HDMI
- RJ45
- USB Host (2)
- J11
1. UART-Rx / GPIO0 UART2_RX
2. UART-Tx / GPIO1 UART2_TX
3. GPIO3 / GPIO2 GPIO2
4. PWM0 / GPIO3 PWM0
5. GPIO4 GPIO3
6. PWM1 / GPIO5 PWM1
7. PWM2 /GPIO6 PWM2
8. GPIO7 GPIO4
- J8
1. GPIO8 GPIO5
2. PWM3 / GPIO9 PWM3
3. SPI_CS / GPIO10 / PWM4 SPI0_CS
4. SPI_MOSI / GPIO11 / PWM5 SPI0_MOSI
5. SPI_MISO / GPIO12 SPI0_MISO
6. SPI_CLK / GPIO13 SPI0_CLK
7. Gnd
8. ARef
9. I2C-SDA TWI2_SDA
10. I2C-SCK TWI2_SCK
- J12
1. ADC0
2. ADC1
3. ADC2
4. ADC3
5. ADC4
6. ADC5
- J9
1. 5V
2. Gnd
3. Gnd
4. 5V
5. 3.3V
6. Reset
7. 5V
8. NC
- J5 Debug Port
1. Rx UART0-RX
2. Gnd GND
2. Tx UART0-TX
- J6 SPI2
1. SPI2_MISO
2. DC_5V
3. SPI2_CLK
4. SPI2_MOSI
5. RESET#
6. GND
- J7 SPI0
1. SPI0_MISO
2. DC_5V
3. SPI0_CLK
4. SPI0_MOSI
5. RESET#
6. GND
- J10
1. GPIO6
2. GPIO8
3. GPIO7
4. GPIO9
Bottom
------
- USB OTG
- DC Power IN (USB)
- microSD card slot
Serial Console
==============
Two UART connections are available:
UART0 is available on J5 Debug Port.
UART2 is available on J11
By default, the serial console will be provided on UART0 in all of these
configurations.
LEDs
====
The pcDuino v1 has four green LEDs. Two are tied to ground and, hence,
illuminated by driving the output pins to a high value:
1. LED1 SPI0_CLK SPI0_CLK/UART5_RX/EINT23/PI11
2. LED5 IPSOUT From the PMU (not controllable by software)
And two are pull high and, hence, illuminated by grounding the output:
3. LED3 RX_LED LCD1_D16/ATAD12/KP_IN6/SMC_DET/EINT16/CSI1_D16/PH16
4. LED4 TX_LED LCD1_D15/ATAD11/KP_IN5/SMC_VPPPP/EINT15/CSI1_D15/PH15
Buttons
=======
There are a total of five switches on-board. All pulled high and, hence,
will be sensed as low when closed.
SW1 Reset (not available to software)
SW2 UBOOT UBOOT_SEL (?)
SW3 Key_Back LCD1_D17/ATAD13/KP_IN7/SMC_VCCEN/EINT17/CSI1_D17/PH17
SW4 Key_Home LCD1_D18/ATAD14/KP_OUT0/SMC_SLK/EINT18/CSI1_D18/PH18
SW5 Key_Menu LCD1_D19/ATAD15/KP_OUT1/SMC_SDA/EINT19/CSI1_D19/PH19
