sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
807c279a83
nuttx/fs/nxffs/nxffs_write.c
patacongo 0f1bdb6ab2 Fix NXFFS positioning bug 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3569 42af7a65-404d-4744-a932-0658087f49c3
2011-05-06 15:19:07 +00:00

853 lines
26 KiB
C
Raw Blame History

/****************************************************************************
* fs/nxffs/nxffs_write.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* References: Linux/Documentation/filesystems/romfs.txt
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <fcntl.h>
#include <crc32.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/fs.h>
#include <nuttx/mtd.h>
#include "nxffs.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_hdrpos
*
* Description:
* Find a valid location for the data block header. A valid location will
* have these properties:
*
* 1. It will lie in the free flash region.
* 2. It will have enough contiguous memory to hold the entire header
* PLUS some meaningful amount of data (NXFFS_MINDATA).
* 3. The memory at this location will be fully erased.
*
* This function will only perform the checks of 1) and 2).
*
* Input Parameters:
* volume - Describes the NXFFS volume
* wrfile - Contains the current guess for the header position. On
* successful return, this field will hold the selected header
* position.
* size - The minimum size of the current write.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure. Of special interest
* the return error of -ENOSPC which means that the FLASH volume is
* full and should be repacked.
*
* On successful return the following are also valid:
*
* wrfile->doffset - Flash offset to candidate data block header position
* volume->ioblock - Read/write block number of the block containing the
* header position
* volume->iooffset - The offset in the block to the candidate header
* position.
* volume->froffset - Updated offset to the first free FLASH block.
*
****************************************************************************/
static inline int nxffs_hdrpos(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile,
size_t size)
{
int ret;
/* Reserve memory for the object */
ret = nxffs_wrreserve(volume, SIZEOF_NXFFS_DATA_HDR + size);
if (ret == OK)
{
/* Save the offset to the FLASH region reserved for the data block
* header
*/
wrfile->doffset = nxffs_iotell(volume);
}
return ret;
}
/****************************************************************************
* Name: nxffs_hdrerased
*
* Description:
* Find a valid location for the data block header. A valid location will
* have these properties:
*
* 1. It will lie in the free flash region.
* 2. It will have enough contiguous memory to hold the entire header
* PLUS some meaningful amount of data (NXFFS_MINDATA).
* 3. The memory at this location will be fully erased.
*
* This function will only perform the check 3). On entry it assumes:
*
* volume->ioblock - Read/write block number of the block containing the
* header position
* volume->iooffset - The offset in the block to the candidate header
* position.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* wrfile - Contains the current guess for the header position. On
* successful return, this field will hold the selected header
* position.
* size - The minimum size of the current write.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure. Of special interest
* the return error of -ENOSPC which means that the FLASH volume is
* full and should be repacked.
*
* On successful return the following are also valid:
*
* wrfile->doffset - Flash offset to candidate data block header position
* volume->ioblock - Read/write block number of the block containing the
* header position
* volume->iooffset - The offset in the block to the candidate header
* position.
* volume->froffset - Updated offset to the first free FLASH block.
*
****************************************************************************/
static inline int nxffs_hdrerased(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile,
size_t size)
{
int ret;
/* Find a valid location to save the inode header */
ret = nxffs_wrverify(volume, SIZEOF_NXFFS_DATA_HDR + size);
if (ret == OK)
{
/* This is where we will put the data block header */
wrfile->doffset = nxffs_iotell(volume);
}
return ret;
}
/****************************************************************************
* Name: nxffs_wralloc
*
* Description:
* Allocate FLASH memory for the data block.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* wrfile - Describes the open file to be written.
* size - Size of the current write operation.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure.
*
****************************************************************************/
static inline int nxffs_wralloc(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile,
size_t size)
{
bool packed;
int ret;
/* Allocate FLASH memory for the data block.
*
* Loop until the data block header is configured or until a failure
* occurs. Note that nothing is written to FLASH. The data block header
* is not written until either (1) the file is closed, or (2) the data
* region is fully populated.
*/
packed = false;
for (;;)
{
size_t mindata = MIN(NXFFS_MINDATA, size);
/* File a valid location to position the data block. Start with
* the first byte in the free FLASH region.
*/
ret = nxffs_hdrpos(volume, wrfile, mindata);
if (ret == OK)
{
/* Find a region of memory in the block that is fully erased */
ret = nxffs_hdrerased(volume, wrfile, mindata);
if (ret == OK)
{
/* Valid memory for the data block was found. Return success. */
return OK;
}
}
/* If no valid memory is found searching to the end of the volume,
* then -ENOSPC will be returned. Other errors are not handled.
*/
if (ret != -ENOSPC || packed)
{
fdbg("Failed to find inode header memory: %d\n", -ret);
return -ENOSPC;
}
/* -ENOSPC is a special case.. It means that the volume is full.
* Try to pack the volume in order to free up some space.
*/
ret = nxffs_pack(volume);
if (ret < 0)
{
fdbg("Failed to pack the volume: %d\n", -ret);
return ret;
}
/* After packing the volume, froffset will be updated to point to the
* new free flash region. Try again.
*/
packed = true;
}
/* Can't get here */
return OK;
}
/****************************************************************************
* Name: nxffs_reverify
*
* Description:
* Verify that the partial flash data block in the volume cache is valid.
* On entry, this function assumes:
*
* volume->ioblock - Read/write block number of the block containing the
* data block.
* volume->iooffset - The offset in the block to the data block.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* wrfile - Describes the open file to be written.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure.
*
****************************************************************************/
static inline int nxffs_reverify(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile)
{
uint32_t crc;
off_t offset;
if (wrfile->datlen > 0)
{
/* Get the offset to the start of the data */
offset = volume->iooffset + SIZEOF_NXFFS_DATA_HDR;
DEBUGASSERT(offset + wrfile->datlen < volume->geo.blocksize);
/* Calculate the CRC of the partial data block */
crc = crc32(&volume->cache[offset], wrfile->datlen);
/* It must match the previoulsy calculated CRC value */
if (crc != wrfile->crc)
{
fdbg("CRC failure\n");
return -EIO;
}
}
return OK;
}
/****************************************************************************
* Name: nxffs_wrappend
*
* Description:
* Append FLASH data to the data block.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* wrfile - Describes the open file to be written.
* buffer - Address of buffer of data to be written.
* buflen - The number of bytes remaimining to be written
*
* Returned Value:
* The number of bytes written is returned on success. Otherwise, a
* negated errno value is returned indicating the nature of the failure.
*
****************************************************************************/
static inline ssize_t nxffs_wrappend(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile,
FAR const char *buffer, size_t buflen)
{
ssize_t maxsize;
size_t nbytestowrite;
ssize_t nbytesleft;
off_t offset;
int ret;
/* Get the offset to the start of unwritten data */
offset = volume->iooffset + wrfile->datlen + SIZEOF_NXFFS_DATA_HDR;
/* Determine that maximum amount of data that can be written to this
* block.
*/
maxsize = volume->geo.blocksize - offset;
DEBUGASSERT(maxsize > 0);
/* But don't try to write over any unerased bytes */
maxsize = nxffs_erased(&volume->cache[offset], maxsize);
/* Write as many bytes as we can into the data buffer */
nbytestowrite = MIN(maxsize, buflen);
nbytesleft = maxsize - nbytestowrite;
if (nbytestowrite > 0)
{
/* Copy the data into the volume write cache */
memcpy(&volume->cache[offset], buffer, nbytestowrite);
/* Increment the number of bytes written to the data block */
wrfile->datlen += nbytestowrite;
/* Re-calculate the CRC */
offset = volume->iooffset + SIZEOF_NXFFS_DATA_HDR;
wrfile->crc = crc32(&volume->cache[offset], wrfile->datlen);
/* And write the partial write block to FLASH -- unless the data
* block is full. In that case, the block will be written below.
*/
if (nbytesleft > 0)
{
ret = nxffs_wrcache(volume);
if (ret < 0)
{
fdbg("nxffs_wrcache failed: %d\n", -ret);
return ret;
}
}
}
/* Check if the data block is now full */
if (nbytesleft <= 0)
{
/* The data block is full, write the block to FLASH */
ret = nxffs_wrblkhdr(volume, wrfile);
if (ret < 0)
{
fdbg("nxffs_wrblkdhr failed: %d\n", -ret);
return ret;
}
}
/* Return the number of bytes written to FLASH this time */
return nbytestowrite;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_write
*
* Description:
* This is an implementation of the NuttX standard file system write
* method.
*
****************************************************************************/
ssize_t nxffs_write(FAR struct file *filep, FAR const char *buffer, size_t buflen)
{
FAR struct nxffs_volume_s *volume;
FAR struct nxffs_wrfile_s *wrfile;
ssize_t remaining;
ssize_t nwritten;
ssize_t total;
int ret;
fvdbg("Write %d bytes to offset %d\n", buflen, filep->f_pos);
/* Sanity checks */
DEBUGASSERT(filep->f_priv != NULL && filep->f_inode != NULL);
/* Recover the open file state from the struct file instance */
wrfile = (FAR struct nxffs_wrfile_s *)filep->f_priv;
/* Recover the volume state from the open file */
volume = (FAR struct nxffs_volume_s *)filep->f_inode->i_private;
DEBUGASSERT(volume != NULL);
/* Get exclusive access to the volume. Note that the volume exclsem
* protects the open file list.
*/
ret = sem_wait(&volume->exclsem);
if (ret != OK)
{
ret = -errno;
fdbg("sem_wait failed: %d\n", ret);
goto errout;
}
/* Check if the file was opened with write access */
if ((wrfile->ofile.oflags & O_WROK) == 0)
{
fdbg("File not open for write access\n");
ret = -EACCES;
goto errout_with_semaphore;
}
/* Loop until we successfully appended all of the data to the file (or an
* error occurs)
*/
for (total = 0; total < buflen; )
{
remaining = buflen - total;
/* Have we already allocated the data block? */
if (wrfile->doffset == 0)
{
/* No, allocate the data block now */
wrfile->datlen = 0;
ret = nxffs_wralloc(volume, wrfile, remaining);
if (ret < 0)
{
fdbg("Failed to allocate a data block: %d\n", -ret);
goto errout_with_semaphore;
}
}
/* Seek to the FLASH block containing the data block */
nxffs_ioseek(volume, wrfile->doffset);
/* Verify that the FLASH data that was previously written is still intact */
ret = nxffs_reverify(volume, wrfile);
if (ret < 0)
{
fdbg("Failed to verify FLASH data block: %d\n", -ret);
goto errout_with_semaphore;
}
/* Append the data to the end of the data block and write the updated
* block to flash.
*/
nwritten = nxffs_wrappend(volume, wrfile, &buffer[total], remaining);
if (nwritten < 0)
{
fdbg("Failed to append to FLASH to a data block: %d\n", -ret);
goto errout_with_semaphore;
}
/* Decrement the number of bytes remaining to be written */
total += nwritten;
}
/* Success.. return the number of bytes written */
ret = total;
filep->f_pos = wrfile->datlen;
errout_with_semaphore:
sem_post(&volume->exclsem);
errout:
return ret;
}
/****************************************************************************
* Name: nxffs_wrreserve
*
* Description:
* Find a valid location for a file system object of 'size'. A valid
* location will have these properties:
*
* 1. It will lie in the free flash region.
* 2. It will have enough contiguous memory to hold the entire object
* 3. The memory at this location will be fully erased.
*
* This function will only perform the checks of 1) and 2). The
* end-of-filesystem offset, froffset, is update past this memory which,
* in effect, reserves the memory.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* size - The size of the object to be reserved.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure. Of special interest
* the return error of -ENOSPC which means that the FLASH volume is
* full and should be repacked.
*
* On successful return the following are also valid:
*
* volume->ioblock - Read/write block number of the block containing the
* candidate oject position
* volume->iooffset - The offset in the block to the candidate object
* position.
* volume->froffset - Updated offset to the first free FLASH block after
* the reserved memory.
*
****************************************************************************/
int nxffs_wrreserve(FAR struct nxffs_volume_s *volume, size_t size)
{
int ret;
/* Seek to the beginning of the free FLASH region */
nxffs_ioseek(volume, volume->froffset);
/* Check for a seek past the end of the volume */
if (volume->ioblock >= volume->nblocks)
{
/* Return -ENOSPC to indicate that the volume is full */
return -ENOSPC;
}
/* Skip over block headers */
if (volume->iooffset < SIZEOF_NXFFS_BLOCK_HDR)
{
volume->iooffset = SIZEOF_NXFFS_BLOCK_HDR;
}
/* Make sure that there is space there to hold the entire object */
if (volume->iooffset + size > volume->geo.blocksize)
{
/* We will need to skip to the next block. But first, check if we are
* already at the final block.
*/
if (volume->ioblock + 1 >= volume->nblocks)
{
/* Return -ENOSPC to indicate that the volume is full */
fdbg("No space in last block\n");
return -ENOSPC;
}
/* This is not the last block in the volume, so just seek to the
* beginning of the next, valid block.
*/
volume->ioblock++;
ret = nxffs_validblock(volume, &volume->ioblock);
if (ret < 0)
{
fdbg("No more valid blocks\n");
return ret;
}
volume->iooffset = SIZEOF_NXFFS_BLOCK_HDR;
}
/* Update the pointer to the first next free FLASH memory -- reserving this
* block of memory.
*/
volume->froffset = nxffs_iotell(volume) + size;
return OK;
}
/****************************************************************************
* Name: nxffs_wrverify
*
* Description:
* Find a valid location for the object. A valid location will have
* these properties:
*
* 1. It will lie in the free flash region.
* 2. It will have enough contiguous memory to hold the entire header
* (excluding the file name which may lie in the next block).
* 3. The memory at this location will be fully erased.
*
* This function will only perform the check 3). On entry it assumes the
* following settings (left by nxffs_wrreserve()):
*
* volume->ioblock - Read/write block number of the block containing the
* candidate oject position
* volume->iooffset - The offset in the block to the candidate object
* position.
*
* Input Parameters:
* volume - Describes the NXFFS volume
* size - The size of the object to be verifed.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned indicating the nature of the failure. Of special interest
* the return error of -ENOSPC which means that the FLASH volume is
* full and should be repacked.
*
* On successful return the following are also valid:
*
* volume->ioblock - Read/write block number of the block containing the
* verified object position
* volume->iooffset - The offset in the block to the verified object
* position.
* volume->froffset - Updated offset to the first free FLASH block.
*
****************************************************************************/
int nxffs_wrverify(FAR struct nxffs_volume_s *volume, size_t size)
{
uint16_t iooffset;
int nerased;
int ret;
int i;
/* Search to the very last block in the volume if we have to */
while (volume->ioblock < volume->nblocks)
{
/* Make sure that the block is in memory */
ret = nxffs_rdcache(volume, volume->ioblock);
if (ret < 0)
{
fdbg("Failed to read block %d: %d\n", volume->ioblock, -ret);
return ret;
}
/* Search to the very end of this block if we have to */
iooffset = volume->iooffset;
nerased = 0;
for (i = volume->iooffset; i < volume->geo.blocksize; i++)
{
/* Is this byte erased? */
if (volume->cache[i] == CONFIG_NXFFS_ERASEDSTATE)
{
/* Yes.. increment the count of contiguous, erased bytes */
nerased++;
/* Is the whole header memory erased? */
if (nerased >= size)
{
/* Yes.. this this is where we will put the object */
off_t offset = volume->ioblock * volume->geo.blocksize + iooffset;
/* Update the free flash offset and return success */
volume->froffset = offset + size;
return OK;
}
}
/* This byte is not erased! (It should be unless the block is bad) */
else
{
nerased = 0;
iooffset = i + 1;
}
}
/* If we get here, then we have looked at every byte in the the block
* and did not find any sequence of erased bytes long enough to hold
* the object. Skip to the next, valid block.
*/
volume->ioblock++;
ret = nxffs_validblock(volume, &volume->ioblock);
if (ret < 0)
{
fdbg("No more valid blocks\n");
return ret;
}
volume->iooffset = SIZEOF_NXFFS_BLOCK_HDR;
volume->froffset = volume->ioblock * volume->geo.blocksize + SIZEOF_NXFFS_BLOCK_HDR;
}
/* Return -ENOSPC if there is no erased memory left in the volume for
* the object.
*/
fdbg("Not enough memory left to hold the file header\n");
return -ENOSPC;
}
/****************************************************************************
* Name: nxffs_wrblkhdr
*
* Description:
* Write the block header information. This is done (1) whenever the end-
* block is encountered and (2) also when the file is closed in order to
* flush the final block of data to FLASH.
*
* Input Parameters:
* volume - Describes the state of the NXFFS volume
* wrfile - Describes the state of the open file
*
* Returned Value:
* Zero is returned on success; Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int nxffs_wrblkhdr(FAR struct nxffs_volume_s *volume,
FAR struct nxffs_wrfile_s *wrfile)
{
FAR struct nxffs_data_s *dathdr;
int ret;
/* Write the data block header to memory */
nxffs_ioseek(volume, wrfile->doffset);
dathdr = (FAR struct nxffs_data_s *)&volume->cache[volume->iooffset];
memcpy(dathdr->magic, g_datamagic, NXFFS_MAGICSIZE);
nxffs_wrle32(dathdr->crc, 0);
nxffs_wrle16(dathdr->datlen, wrfile->datlen);
/* Update the entire data block CRC (including the header) */
wrfile->crc = crc32(&volume->cache[volume->iooffset], wrfile->datlen + SIZEOF_NXFFS_DATA_HDR);
nxffs_wrle32(dathdr->crc, wrfile->crc);
/* And write the data block to FLASH */
ret = nxffs_wrcache(volume);
if (ret < 0)
{
fdbg("nxffs_wrcache failed: %d\n", -ret);
goto errout;
}
/* After the block has been successfully written to flash, update the inode
* statistics and reset the write state.
*
* volume:
* froffset - The offset the next free FLASH region. Set to just after
* the inode data block that we just wrote. This is where we will
* begin the search for the next inode header or data block.
*/
volume->froffset = (wrfile->doffset + wrfile->datlen + SIZEOF_NXFFS_DATA_HDR);
/* wrfile->file.entry:
* datlen: Total file length accumulated so far. When the file is
* closed, this will hold the file length.
* doffset: Offset to the first data block. Only the offset to the
* first data block is saved.
*/
wrfile->ofile.entry.datlen += wrfile->datlen;
if (wrfile->ofile.entry.doffset == 0)
{
wrfile->ofile.entry.doffset = wrfile->doffset;
}
/* Return success */
ret = OK;
errout:
wrfile->crc = 0;
wrfile->doffset = 0;
wrfile->datlen = 0;
return ret;
}
Reference in New Issue View Git Blame Copy Permalink