nuttx/configs/compal_e86/nsh_highram/Make.defs
2015-09-01 13:19:57 -04:00

140 lines
5.6 KiB
Plaintext

############################################################################
# configs/compal_e86/nsh_highram/Make.defs
#
# Copyright (C) 2007, 2008, 2011, 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs
ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
LDSCRIPT = flash.ld
else
LDSCRIPT = highram.ld
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -I "${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/include}" -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -I "${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/include}" -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
ifeq ("${CONFIG_SERCOMM_CONSOLE}","y")
OSMODIR = "${shell cygpath -w $(TOPDIR)/../../osmocom-bb}"
EXTRA_LIBS = "${shell cygpath -w $(OSMODIR)/src/target/firmware/comm/libcomm.a}" \
"${shell cygpath -w $(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a}" \
"${shell cygpath -w $(OSMODIR)/src/target/firmware/calypso/libcalypso.a}" \
"${shell cygpath -w $(OSMODIR)/src/target/firmware/comm/libcomm.a}"
endif
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHINCLUDES = -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
ifeq ("${CONFIG_SERCOMM_CONSOLE}","y")
OSMODIR = $(TOPDIR)/../../osmocom-bb
EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
$(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a \
$(OSMODIR)/src/target/firmware/calypso/libcalypso.a \
$(OSMODIR)/src/target/firmware/comm/libcomm.a
# ^^^ Stupid hack! Why do I have to put it twice???
endif
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ifeq ($(ARCHCCMAJOR),4)
ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -fno-builtin
else
ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =