nuttx

History

patacongo c649e981d3 Turn PIC32MXMMB backlight off git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4653 42af7a65-404d-4744-a932-0658087f49c3		2012-04-25 02:10:42 +00:00
..
include	lpc2378 port contributed by Rommel Marcelo	2010-04-09 00:51:08 +00:00
nsh	Kconfig update	2012-04-16 15:45:33 +00:00
ostest	Kconfig update	2012-04-16 15:45:33 +00:00
src	Turn PIC32MXMMB backlight off	2012-04-25 02:10:42 +00:00
Kconfig	Kconfig updated + NFS update	2012-04-23 19:55:32 +00:00
README.txt	lpc2378 port contributed by Rommel Marcelo	2010-04-09 00:51:08 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.