nuttx

History

Jiuzhu Dong 85470176e7 sched/task: delete CONFIG_MAX_TASKS limit Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>		2021-07-11 19:42:30 -07:00
..
configs/nsh	sched/task: delete CONFIG_MAX_TASKS limit	2021-07-11 19:42:30 -07:00
include	boards: arm: Author Gregory Nutt: update licenses to Apache	2021-03-18 22:58:27 -07:00
scripts	Make: use gcc as LD	2021-06-10 03:43:18 -07:00
src	Don't include assert.h from public header file	2021-06-03 08:36:03 -07:00
Kconfig
README.txt

README.txt

Teensy LC README
================

  This is the README file for NuttX on the PJRC Teensy LC.  The Teensy LC
  is a DIP style breakout board for the MKL25Z64 and comes with a USB
  based bootloader.  Contributed by Michael Hope.

Development Environment
=======================

  All testing was done with the GNU ARM Embedded 4.9 toolchain on
  Linux.  See https://developer.arm.com/open-source/gnu-toolchain/gnu-rm to download.

  Once you've configured and built NuttX, flash the resulting
  nuttx.hex file to the board using the Teensy Loader Application.

LEDs
====

  The Teensy LC has a single LED. If CONFIG_ARCH_LEDS is defined, then
  NuttX will update the LED as the board boots.  The summary is:

  * LED off: board booting
  * LED on: initial stack created
  * LED flashing: panic.

  See `include/board.h` for details.

Serial Console
==============

  The serial console is mapped to UART0 and appears on pins 0 (RX) and
  1 (TX). Consider using a 3.3 V USB to serial adapter such as the
  Sparkfun #9717 FTDI cable.